Premier StakCut 724 24" Heavy Duty Paper Trimmer User Manual, page 1

Page 1 of 3

Premier StakCut 724 24" Heavy Duty Paper Trimmer User Manual, page 2
Text on page 2

StakCut Paper Trimmers

715 PARTS LIST

Key Features and Benefits

724 PARTS LIST

Page 2 of 3

Premier StakCut 724 24" Heavy Duty Paper Trimmer User Manual, page 3
Text on page 3

Operating Instructions

  1. Place the trimmer on a flat, stable surface
  2. Release the blade latch, which is located on the hand grip (A)
  3. Lift the blade arm (A) up into cutting position
  4. Slide the paper under the clamp (D), pushing the paper up

Key Components

grid, to align the paper to the proper position. CAUTION: Keep hands and fingers behind the clamp (D) at all times, away from the cutting blades

  1. While holding the silver clamp handle (D) down with your left hand, pull down the blade arm (A) to cut.
  2. Always make sure that the blade arm is completely down and locked when not in use.

Safety Information

the blade latch is engaged, when not in use

Assembly Instructions

Automatic Safety Latch

The patented automatic blade latch is a key safety feature of this trimmer. It will lock with every complete cutting stroke, helping to eliminate forgetfulness. Remember to always push the blade arm down completely when you are finished cutting, to ensure that the latch activates. Never remove the latch for any reason.

For Best Cutting Performance

Use Trim-Ease Blade Lubricant for a smoother cut and to help preserve the life of the cutting blade. To order, send $4.00 per stick and a self-addressed, stamped envelope to the address below.

Customer Service

Telephone: Fax: Email: Internet: Address:

(260) 563-0641 (260) 563-4575 info@martinyale.com www.martinyale.com Martin Yale Industries, Inc. 251 Wedcor Avenue Wabash, IN 46992

Visit www.martinyale.com for information on office products, including folding machines, punches, and catalog racks.

AUTOMATIC BLADE

SAFETY LATCH

Literature Part No. M-S027087

Page 3 of 3 · End of manual

Quick start

  1. Place the trimmer on a flat, stable surface
  2. Release the blade latch, which is located on the hand grip (A)
  3. Lift the blade arm (A) up into cutting position
  4. Slide the paper under the clamp (D), pushing the paper up

Troubleshooting

ProblemLikely causeFix (from the manual)
Risk of cutting fingers during a cut.Hands are near the cutting blades.Keep hands and fingers behind the clamp (D) at all times, away from the cutting blades. Hold the clamp handle down with your left hand while you pull the blade arm down. Page 3
Blade arm is left unlocked after cutting.The blade arm was not pushed down completely.Always make sure the blade arm is completely down and locked when not in use. Push it down fully so the latch activates. Page 3
Automatic safety latch does not seem to work.The latch locks only with a complete cutting stroke.Push the blade arm down completely when you finish cutting. Never remove the latch for any reason. Page 3
Cut is not smooth and the blade wears quickly.The blade is not lubricated.Use Trim-Ease Blade Lubricant for a smoother cut and to help preserve the life of the cutting blade. Page 3
Trimmer is unstable while cutting.The trimmer is not on a flat, stable surface.Place the trimmer on a flat, stable surface before use. Page 3

Frequently asked questions

How do I cut paper with the StakCut 724?

Release the blade latch on the hand grip and lift the blade arm into cutting position. Slide the paper under the clamp, hold the clamp handle down, and pull the blade arm down to cut. See page 3.

What does the automatic safety latch do?

It locks with every complete cutting stroke, which helps prevent forgetting to lock the blade. Push the blade arm down completely so the latch activates. See page 3.

How can I get a smoother cut?

Use Trim-Ease Blade Lubricant. It gives a smoother cut and helps preserve the cutting blade. See page 3.

Where should I put the trimmer?

Place it on a flat, stable surface. See page 3.

How do I contact customer service?

Call (260) 563-0641 or email info@martinyale.com. See page 3.