QRT-351900 User's Manual, page 1

Page 1 of 5

QRT-351900 User's Manual, page 2
Text on page 2

USE AND CARE OF QUARTET ® MARKER BOARDS

  1. Clean board prior to first use with mild soap and water (do not use abrasive cleaners). Rinse and dry thoroughly with a soft cloth.
  2. Use only DRY-ERASE MARKERS. Other markers may permanently damage the writing surface. For best erasing results, replace markers at least once a year.
  3. Use a clean eraser to remove dry-erase ink from the board surface. Occasionally, use MARKER BOARD CLEANER to remove grease, dirt and dry-erase ink residue that may build up on the board surface.
  4. Avoid leaving marks on the board surface for prolonged periods. Dry-erase ink becomes difficult to erase over time, especially when exposed to direct sunlight or high humidity.
  5. Do not use adhesive tape of any kind on the board surface.

ACCESSORIES TO ENHANCE YOUR BOARD’S PERFORMANCE

For optimal performance, we ® recommend using Quartet brand markers and accessories. Board cleaners and conditioners help maintain your board and keep it performing like new.

Look for these high-performance accessories from Quartet ®

® EnduraGlide Dry-Erase Markers

® Ghostduster Eraser

Quartet is a registered trademark of General Binding Corporation. ACCO name and design is a registered trademark of ACCO Brands. © 2013 ACCO Brands Corporation. All Rights Reserved. Quartet est une marque déposée de General Binding Corporation. Le nom ACCO et son dessin est une marque déposée d’ACCO Brands. © 2013 ACCO Brands Corporation. Tous droits réservés. Quartet es una marc registradas de General Binding Corporation. El nombre y el diseño de ACCO son marca registrada de ACCO Brands. © 2013 ACCO Brands Corporation. Todos los derechos reservados.

Dry-Erase Cleaner

BoardWipes Dry-Erase Cleaning Wipes

Page 2 of 5

QRT-351900 User's Manual, page 3
Text on page 3

UTILISATON ET ENTRETIEN DES TABLEAUX BLANCS QUARTET ®

  1. Nettoyer le tableau avant la première utilisation à l’aide d’une solution d’eau et de détergent doux (ne pas utiliser de produits nettoyants abrasifs). Rincer et bien assécher à l’aide d’un chiffon doux.
  2. Utiliser uniquement des MARQUEURS EFFAÇABLES À SEC. Tout autre type de marqueur peut endommager la surface d’écriture de façon permanente. Remplacer les marqueurs au moins une fois par année pour obtenir de meilleurs résultats d’effaçage.

USO Y CUIDADO DE LOS TABLEROS PARA MARCADORES QUARTET ®

  1. Limpie el tablero antes del primer uso con agua y un jabón suave (no use limpiadores abrasivos). Enjuague y seque a fondo con un paño suave.
  2. Use únicamente MARCADORES DE BORRADO EN SECO. Los marcadores de

obtener los mejores resultados en el borrado, reemplace los marcadores una vez por año como mínimo.

  1. Utiliser une brosse à effacer propre pour éliminer l’encre effaçable à sec de la surface du tableau. De temps à autre, utiliser un NETTOYANT POUR

effaçable à sec qui peuvent s’accumuler à la surface du tableau.

cie del tablero. Periódicamente, use LIMPIADOR DE TABLEROS PARA MARCADORES para eliminar la grasitud, la suciedad y los residuos de tinta

  1. Éviter de laisser des marques sur le tableau durant de longues périodes.

elle est exposée directement à la lumière du soleil ou si l’humidité ambiante est élevée.

Con el tiempo, la tinta de borrado en seco se torna difícil de borrar, especialmente cuando está expuesta a la luz solar directa o a la humedad elevada.

  1. N’utiliser aucune sorte de ruban adhésif sur la surface de ce tableau.

ACCESSOIRES POUR MAXIMISER LE RENDEMENT DE VOTRE TABLEAU

ACCESORIOS PARA MEJORAR EL RENDIMIENTO

DE SU TABLERO.

Pour les meilleurs résultats possibles, nous recommandons l’utilisation de marqueurs et d’accessoires de marque Quartet ® . Les nettoyants et les conditionneurs à tableau aident à entretenir votre tableau et à lui garder son rendement initial.

Para lograr un óptimo rendimiento, recomendamos usar marcadores y accesorios marca Quartet ® . Los limpiadores y acondicionadores de tableros ayudan a mantener su tablero y contribuyen a que siempre luzca y funcione como nuevo.

Recherchez les accessoires suivants Quartet ® de haut rendement :

Busque los siguientes accesorios de alto rendimiento de Quartet ® :

  • Marqueurs effaçables à sec EnduraGlide ™
  • Brosse à effacer Ghostduster ®
  • Nettoyant pour surface à effacement sec
  • Serviettes nettoyantes pour tableaux blancs BoardWipes
  • Marcadores de borrado en seco EnduraGlide ™
  • Borrador Ghostduster ®
  • Limpiador de borrado en seco
  • Paños de limpieza para borrado en seco BoardWipes

DECleaning&CareInx.Rev2

Page 3 of 5

QRT-351900 User's Manual, page 4
Text on page 4

Quartet is a registered trademark of General Binding Corporation. ACCO name and design is a registered trademark of ACCO Brands. © 2013 ACCO Brands Corporation. All Rights Reserved.

Quartet est une marque déposée de General Binding Corporation. Le nom ACCO et son dessin est une marque déposée d’ACCO Brands. © 2013 ACCO Brands Corporation. Tous droits réservés.

Quartet es una marc registradas de General Binding Corporation. El nombre y el diseño de ACCO son marca registrada de ACCO Brands. © 2013 ACCO Brands Corporation. Todos los derechos reservados.

Page 4 of 5

QRT-351900 User's Manual, page 5
Text on page 5

Quartet is a registered trademark of General Binding Corporation. ACCO name and design is a registered trademark of ACCO Brands. © 2013 ACCO Brands Corporation. All Rights Reserved.

Quartet est une marque déposée de General Binding Corporation. Le nom ACCO et son dessin est une marque déposée d’ACCO Brands. © 2013 ACCO Brands Corporation. Tous droits réservés.

Quartet es una marc registradas de General Binding Corporation. El nombre y el diseño de ACCO son marca registrada de ACCO Brands. © 2013 ACCO Brands Corporation. Todos los derechos reservados.

Page 5 of 5 · End of manual

Quick start

  1. Before first use, clean the board with mild soap and water, then rinse and dry with a soft cloth.
  2. Write only with dry-erase markers; replace them at least once a year.
  3. Erase with a clean eraser, and occasionally use marker board cleaner to remove grease, dirt and ink residue.
  4. Do not leave marks on the board for long periods, and never use adhesive tape on the surface.

Troubleshooting

ProblemLikely causeFix (from the manual)
Dry-erase ink is hard to eraseMarks were left on the board for a long time, especially in direct sunlight or high humidityAvoid leaving marks on the board for long periods. Erase with a clean eraser. Page 2
Ink residue, grease or dirt on the boardResidue builds up on the writing surface over timeUse Marker Board Cleaner from time to time to remove grease, dirt and ink residue. Page 2
Writing surface is permanently damagedMarkers other than dry-erase markers were usedUse only dry-erase markers. Other markers can damage the surface for good. Page 2
Markers do not erase wellMarkers are oldReplace markers at least once a year for the best erasing results. Page 2
Board is dirty before first use or needs cleaningThe board has not been cleaned yetClean with mild soap and water. Do not use abrasive cleaners. Rinse and dry with a soft cloth. Page 2
Tape on the board surfaceAdhesive tape was applied to the boardDo not use adhesive tape of any kind on the board surface. Page 2

Frequently asked questions

What markers can I use on a Quartet marker board?

Only dry-erase markers. Other markers may permanently damage the writing surface. See page 2.

Why is my whiteboard hard to erase?

Dry-erase ink gets harder to erase over time, especially in direct sunlight or high humidity. Use marker board cleaner to remove built-up residue and replace markers at least once a year. See page 2.

Can I use tape on the board?

No. Do not use adhesive tape of any kind on the board surface. See page 2.