

Page 1 of 18

Text on page 2
BEDIENUNGSANLEITUNG ● OPERATION MANUAL ● MANUAL DE INSTRUCCIONES ● IINSTRUCTIONS ● NÁVOD K POUŽITÍ ● GEBRUIKSAANWIJZING ● NÁVOD NA POUŽITIE ● ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ ● MANUALE DI ISTRUZIONI
SPB 360
D Handstanze ● Elektrische Spiralisiermaschine, manuele Abschneid-u. Umbiegemaschine E Manual punch, electrical coil inserting machine ● Manual cut and bending machine ESP Perforadora manual, formadora eléctrica de espirales ● Máquina manual cortadora y dobladora F Perforeuse manuelle, machine électrique pour l’insertion des spirales ● Machine manuelle pour couper et recourber CZ Ruční děrovače, elektrický vázací stroj ● Ruční zařízení pro řezání a ohýbání pružiny(spirály) NL Handstans ● Electrische spiraleermachine met geintegreerde, manuele spiraal afsnij- en ombuig- inrichting SK Ručny dierovaci, elektrický viazací stroj ● Ručné zariadenia na rezanie a ohýbanie pružiny (špirály) RUS Ручный перфоратор, электрическая машина для переплета спирали ● Pучное устройство для обрезки и загиба пружины I Macchina foratrice e rilegatrice elettrica per spirali in plastica
Danke, dass Sie sich für ein RENZ-Produkt entschieden haben. Thank you for choosing a RENZ product. Gracias por haber escogido un producto RENZ. Merci d‘avoir choisi un produit RENZ. Děkujeme, že jste se rozhodli pro výrobek RENZ. Dank u wel , dat u hebt gekozen voor een RENZ product. Ďakujeme, že ste sa rozhodli pre výrobok spoločnosti RENZ. Спасибо, что выбрали этот продукт RENZ. Grazie per aver scelto un prodotto di RENZ.
Stanzhebel Punching lever Palanca de perforación Levier de perforation Děrovací páka Ponshendel Dierovacia páka Ручка перфорации Leva di foratura
Meßskala Measuring scale Escala de medición Echelle de mesure Měřící stupnice Maatindicator Meracia stupnica Шкала диаметров пружины Scala di misurazione
Druckstücke Pins Punzones Tirettes Západky nožu Ponstempel Západky nožov Пальцы фиксации ножей Punzoni
Papieranschlag mit Klemmschraube Paper guide with attachment screw Tope del papel con tornillo de sujeción Butée de papier avec vis de serrage Doraz papíru s upínacím šroubem Papieraanleg met klemschroef Zarážka papiera s upínacou skrutkou Ограничитель бумаги Guida posizione carta
Stanzschacht Punching shaft Perfroración Gorge de perforation děrovací štěrbina Ponsschacht dierovacia štrbina Окно перфорации Foratura
Abfallschublade Waste drawer Cajón de desperdicios Tiroir des déchets Zásuvka na odpad Afvallade Zásuvka na odpad Лоток для отходов Cassetto per gli sfridi di carta
Gummiwalze Rubber roller Cilindro de goma Rouleau d’entrainement en caoutchouc Pryžový váleček Rubberwals Gumený valček Резиновый вал Rullo die gomma
Tischnetzteil Power supply La fuente de alimentación Adaptateur Napájecí zdroj Tafel netdeel Napájací zdroj Блок питания Alimentazione elettrica
Schneide-und Umbiegemesser Cut and bending knife Cuchilla de tronzado y de doblado Couteau à couper et recourber Nůž pro řezání a ohýbání Snij- en ombuig- inrichting Nôž pre rezanie a ohýbanie Нож для обрезки и загиба Taglia e piega code
Ei n-und Ausschalter Gummiwalze
Power switch On-off rodillo de goma interruptor I nterrupteur marche/arrêt du rouleau d’entrainement O n-off přepínač pryžový váleček I n en uitschakelen van de rubberwals O n-off prepínač gumený valček Выключатель для резинового валика Interruttore di alimentazione
Gerätezuleitung Power cable Cable de connexion del aparato Câble d’alimentation Napájecí kabel Stroomaansluiting kabel Napájací kábel Шнур электропитания Cavo elettrico
www.renz.com
Bestell Nr. / Order Nr. 971000067
Handhebel Hand lever Palanca de mano Levier Páka Handhendel Páka Рычаг Leva manuale
Page 2 of 18

Text on page 3
EINSATZ ● APPLICATION ● UTILIZACIÓN ● UTILISATION ● POUŽITÍ ● GEBRUIK ● POUŽITIE ● ИСПОЛЬЗОВАНИЕ ● UTILIZZO
ESP
RUS
Einsatzgebiet: Papier stanzen: max. 17 Seiten 70-80 g/m². Karton stanzen: max. 1,5 mm. Kunststoff-Folien stanzen: max. 1 Seite à 0,3 mm. Keine anderen Materialien oder Metalle stanzen!
Zum elektrischen Einspiralisieren von Plastik- und Drahtspiralen bis ø 20 mm.
Zum Abschneiden und Umbiegen von Plastikspiralen bis ø 20 mm, nicht für Drahtspiralen geeignet. Für Drahtspiralen wird die SC-Zange verwendet.
Field of application: Punching of paper: max. 17 pages 70/80 g/m² - 20 # stock. Punching of card stock: max. thickness: 1,5 mm. Punching of plastic foil: max. 1 page for 0,3 mm thickness. Do not punch any other material or metal!
The spirals are easily inserted into the pre-punched bookby means of an electrical drive.
The integrated spiral cutting and crimping unit perfectly cuts and crimps the plastic spiral ends. Metal spirals can only be cut, using a SC-pliers.
Áreas de utilización: Perforado de papel:máx. 17 páginas de 70/80 g/m². Perforado de cartón: máx.1,5mm. Perforado de hojas de plastico: máx. 1 hoja de 0,3 mm. No perfore ningún otro material o métal!
Permite el trabajo con espirales plásticos y metálicosde hasta 20 mm de diámetro.
Dispositivo cortador y doblador de espirales integrado en la máquina sólo apropiado para espirales plásticos de hasta 20 mm de diámetro. Para cortar y doblar espirales metálicos se recomienda usar la pinza SC.
Domaine d’utilisation: Perforation du papier :17 feuilles maxi. 70 à 80 g/m². Perforation du carton : épaisseur 1,5 mm maxi. Perforation de feuilles de plastique : 1 feuille de 0,3 mm. Ne perforer aucune autre matière ou métal!
Pour l‘insertion électrique des spirales métalliques et plastiques jusqu‘au ø 20 mm.
Unité intégrée pour couper et recourber les spirales plastiques jusqu‘au ø 20 mm. Pour les spirales métalliques, la pince SC est recommandée pour obtenir une fi nition plus nette.
Použití: Děrování papíru: max. 17 listů 70g - 80g/m 2. Děrování kartonu: max. 1,5 mm . Děrování fólií: 1 list á 0,3 mm. Neděrujte žádné jiné materiály nebo kovy
K elektrickému vázání plastových a drátěných spirál až do ø 20 mm.
K řezání a ohýbání plastových spirál až do ø 20 mm, není vhodné pro drátěné spirály. Pro drátěné spirály se používají SC-kleště.
Gebruik: Papier ponsen: Max. 17 bladen 70-80 g/m². Karton ponsen : Max. 1,5 mm. Kunststof folie ponsen: Max. 1 blad à 0,3 mm. Geen andere materialen of metalen ponsen!
Voor het inspiraleren van plastic en draadspiralen tot 20 mm.
Voor het afsnijden en ombuigen van plasticspiralen tot 20 mm, niet voor draadspiralen geschikt. Voor draadspiralen is de SC-Tang nodig.
Použitie: Dierovanie papiera: max. 17 listov 70g - 80 g/m 2. Dierovanie kartónu: max. 1,5 mm. Dierovanie fólie: 1 list á 0,3 mm. Nedierujte žiadne iné materiály alebo kovy!
K elektrickému viazanie plastových a drôtených špirál až do ø 20 mm.
Na rezanie a ohýbanie plastových špirál až do ø 20 mm, nie je vhodné pre drôtené špirály. Pre drôtené špirály sa používajú SC-kliešte.
Интегрированная система обрезки и загиба концов пластиковой спирали. Металлические спирали могут быть так же обрезаны и загнуты с помощью SC-клещей.
Caratteristiche: Foratura max. 17 fogli 70/80 g/m Massimo spessore di carta 1.5 mm. Massimo spessore di plastica: 1 foglio da 0.3 mm. Non utilizzare per la foratura di altro materiale.
Permette il lavoro con spirali di plastica e metallico fino a 20 mm di diametro.
È fornita di un sistema integrato per tagliare e piegare la spirale. Le spirali metalliche possono essere tagliate mediante l’utilizzo della pinza SC.
Page 3 of 18

Text on page 4
EINSATZ ● APPLICATION ● UTILIZACIÓN ● UTILISATION ● POUŽITÍ ● GEBRUIK ● POUŽITIE ● ИСПОЛЬЗОВАНИЕ ● UTILIZZO
Vor dem ersten Einsatz: Einige Probestanzungen durchführen. Damit wird der Rostschutz von den Stanzstempeln entfernt. So oft wiederholen, bis Stanzlöcher ohne Flecken sind.
Empfi ndliche Möbeloberfl ächen schützen. Das Gerät steht auf weichen Kunststofffüßen. Manche Oberfl ächen können sich auf Dauer verfärben.
Vorsicht! Bei starkem Temperaturwechsel erst nach 2h einschalten. Wenn das Gerät aus einem kalten Raum kommt kann sich Kondenswasser gebildet haben.
Before fi rst use: Punch scrap paper to clean the rust preventative from the punch dies.
Protect sensitive furniture surface. The machine stands on plastic feet. Some surface may become discoloured after time.
Caution! In case of major change of temperature turn on the machine only after 2 h. If the machine has been in the cold room, is condensation water may be possible.
Antes de su primer uso: Hacer algunas perforaciónes de prueba. De esta forma se limpian las cuchillas de perforación del aceite que tiene la máquina. Repetir la operación hasta que los punzones queden limpios.
Proteger las superfi cies delicades. Algunas superfi cies pueden perder color con el tiempo.
ESP
Precaución! En caso de un cambio brusco en la temperatura encienda la máquina depués de 2 horas. Si la máquina ha estado en una habitation fria, puede producirse condensation del agua.
Attention! Lors d `un grand changement de température ne faire fonctionner la machine que 2 heures apres avoir laissé reposer. Si la machine était dans une piéce froide, de l`eau condenséepeut se former.
Avant la premièren utilisation: exécuter quelques perforations d’essai. Ainsi, la protection anti-rouille du poinçon sera enlevée. Recommencer jusqu’à ce que le poinçon ne comporte plus de taches.
Protéger les supports de meuble fragiles. L‘appareil se trouve sur des pieds en matière synthétique. Certains supports peuvent se décolorer avec le temps.
Pozor! V případě velkých změn teplot zapnout teprve po 2 hodinách. Pokud bylo zařízení předtím ve studené místnosti, mohla se vytvářet sražená voda.
Před prvním použitím: Proveďte zkušební děrování. Tímto se odstraní ochrana proti korozi na vysekávacích nožích. Opakujte tolikrát, dokud nebudou vysekané otvory bez zašpinění.
Doporučená ochrana nábytkových ploch. Přístroj stojí na měkkých plastových nohách, mnohé plochy mohou být po čase zbarveny.
Pas Op! Bij sterke temperatuur wisselingen eerst na 2uur weer inschakelen. Als de machine uit een koude ruimte komt kan er zich condensvocht vormen
Voor het eerste gebruik: Enkele proefponsingen maken. Hiermee wordt de roestbescherming van de ponsmessen verwijderd. Herhalen tot dat de ponsgaten vlekvrij zijn.
Gevoelige meubeloppervlakken beschermen. Het apparaat staat op zachte kunststofvoeten. Enkele oppervlakken kunnen op lange termijn verkleuren.
Pozor! V prípade veľkých zmien teplôt zapnúť až po 2 hodinách. Ak bolo zariadenie predtým v studenej miestnosti, mohla sa vytvárať zrazená voda.
Pred prvým použitím: Preveďte skúšobné dierovanie. Týmto sa odstráni ochrana proti korózii na výsekových nožoch. Opakujte toľkokrát, až budú vysekané otvory bez zašpinenia.
Odporúčaná ochrana nábytkových plôch. Prístroj stojí na mäkkých plastových nohách, mnohé plochy môžu byť po čase sfarbené.
Attenzione! In caso di temperature elevate o surriscaldamento si prega di accendere la macchina solo dopo 2 ore. Un’elevata temperatura nella stanza di utilizzo può creare condensa.
Primo utilizzo: Fare delle forature di campionatura per rimuovere l’olio di protezione dai punzoni fi no a completa rimozione.
Proteggere le superfi ci delicate. La macchina è poggiata su piedini di gomma. Alcune superfi ci si possono scolorire nel tempo.
RUS
Page 4 of 18

Text on page 5
RUS
1.SPB 360,
- Leva di foratura
- L‘alimentazione elettrica,
- GIOCO DI VITE,
- Manuale di istruzioni
slider graduée
\ MANU ɋɌɊɍ
8ä,7,( EITUN
NA32 SANL
NUNG
e váza com bind
en z. co m
Sicheru Fuse Fusible Fusible+ ng pojistka zekering poistka ɩɪɟɞɨɯɪ
Papiera Paper Tope nschlag Butée guide doraz del Papiera du papel ]DUiåND papíru papier Ɉɝɪɚɧɢ anleg SDSLHUD ɱɢɬɟɥɶ
ɩɟɪɮɨ SHGiO ɶ
Hauptsc ɪɚɰɢɢ Main Interrup halter Interrup switch hlavní hoofdsc tor teur principa hlavný vypínaþ ɝɥɚɜɧɵɣ principa hakelaa vypínaþ l
Teilun pitch paso g pas dČlen steek delen í ɞɟɥɟ ie ɧɢɟ
Luftschl Air Respira Slots Grilles itze Vzduch Ventilati d deros Vzduch aeration ové de Bɟɧɬɢɥ e otvory ventilac ové rooster ɹɰɢɨɧɧ otvory ion
Fußsch Pedal ɨɟ
Conmut ɨɬɜɟɪɫɬ
alter Pédale 1RåQtS Voetped ador ɢɟ
de 1RåQê HGiO de démarra ɉɟɞɚɥ aal Pedal
Druckst Pins Punzon Presseu ücke tlakové Ponstem es tlakové r ɉɚɥɶɰɵ matrice pel kolíky
UHHQ = LHGHQ
URER ɭɤɬ5 ]QDþ 5(1 KDEH
NVSR N\5( (1= =SUR Q
ORþQR 1= GXFW VWL5(
Netzans Voltage Conexio Branche chluß SíĢová
spannin n a sieĢová ment la pĜípojka red
ɧɚɩɪɹɠ g au prípojka réseau ɟɧɢɟ
GXFW XNWH
NR]H (1= GXFWR RGOLS URYê ɷɬɨɬ QYRR QWVFK UHYê UREHN 5(1
Meßsca Measur Escala Echelle la ing mČĜící de scale Maatind de medició meracia stupnice mesure
ɒɤɚɥɚ icator n stupnica ɞɢɚɦɟɬ
Randein Adjustin Ajuste Alignem stellung nastave de g scale Randins profund nastave ent edge Ɋɟɝɭɥɹɬ ní échelle okraje telling idad adjustm
ní de graduée ɨɪ okraje perforac
ɝɥɭɛɢɧɵ ent
Bindehe Binding Palanca Levier bel vázací lever Inbindhe de de viazacia reliure páka encuade Ɋɭɱɤɚ ndel páka rnación
ɡɚɠɢɦɚ
Abfallsc ɩɪɭɠɢɧ Waste Cajón hublade ɵ Tiroir drawer zásuvka de Afvallad à desperd zásuvka rognure Ʌɨɬɨɤ na e odpad icios s
ɞɥɹ na odpad ɨɬɯɨɞɨɜ
BEDIE
NÁVO
Kom Ʉɐɂə AL?
Com Maq binie ɉɈ ,1675
Mac bine ɗɄCɉ
Kom uina rte 8&&,Ï
Pons hine d, ɅɍATA Kom bino com elec elek 1(6
ɉɟɪ - à bino en vaný relie bina trica trisc ɐɂɂ ?,167
ɟɩɥɟ inbin he
D ESP E
F &= NL SK RUS
r da l vaný dČro
'DQN et punc Stan ɬɱɢɤ dma pérfo
7KDQ perfo diero vací h z-
- UDF HGD chin rer rado and
0HUF N\RX
und
DČNX LDVS VV6L
vací a
'DQN LGµDY IRUF HVLF
ra-en Han
RUKD ĆDNX MHPH a ing dbin
KRRV KIU
viaza cí biné cuad ɋɩɚɫ XZH RLUFK EHUH pĜíst mac
MHPH åHMV
e
LQJD HLQ5
ɢɛɨ, OGD RLVLX VFRJ cí erna dem
åHV WHVH hine
príst roj
5(1 asch
ɱɬɨ WXKH QSUR LGRX (1= dora
WHVD UR]K
roj
=SUR ɜɵɛɪ EWJH ine
GXLW5 3URG
UR]K RGOLS QSUR
Stanzsc Punchin
Haltevo Hueco
Holding Gorge hacht
Disposit dČrovac g shaft Disposit rrichtun de Ponssch de
alambre xture perforad dierovac perforat upínací if d‘inserti g ɉɪɨɛɢɜ í slot
Houder ivo for für acht
Bindeel
de
upínacie binding o
ia
on Ƚɪɟɛɺɧɤ zaĜízení retenció ion
voor des emente ɨɱɧɨɟ štrbina element
bindelem Meßsca ɚ zariaden pro n élément ɨɬɜɟɪɫɬ
de
Measur ɩɟɪɟɩɥ vázací element
Escala s
ie s
Echelle la ɢɟ
plastiqu
pre enten ɺɬɧɨɝɨ prvky
mČĜící ing de scale os
viazacie
Maatind de es
de medició meracia stupnice ɦɟɯɚɧɢ
mesure
ɒɤɚɥɚ chrbty
ɩɪɭɠɢɧ icator n ɡɦɚ
stupnica ɞɢɚɦɟɬ ɵ
ɪɨɜ
Klemms Attachm Tornillo chraube
Vis ent upínací de de Klemsch serrage screw sujeción für upínacia Maßsta Ɏɢɤɫɚɬɨ šroub for roef pour adjustin skrutka pro de la b échelle ɪ voor mČĜítko ɩɨɥɨɠɟ escala g
maat pre
AUFSTELLEN ● SETUP ● COLOCACIÓN ● MISE EN PLACE ● SESTAVENÍ ● PLAATSEN ● ZOSTAVENIE ● УСТАНОВKA ● MESSA IN FUNZIONE
Stanzbügel an der linken Seite der Maschine einhängen
und dann an der rechten Seite einrasten.
Schutzkartons entfernen. Lieferumfang prüfen: 1.SPB 360, 2.Stanzbügel, 3.Tischnetzteil, 4.Schraubenset 5.Bedienungsanleitung.
On the left hand side of the machine, locate the handle on the shaft.
Stretch the handle over to locate on the right hand side.
Remove protective packing and check contents of the box. You should have: 1.SPB 360, 2.Punching lever, 3.Power supply, 4.SCREW SET, 5.Operating manual.
Enganche la palanca de perforado en el lado izquierdo de la máquina
y alinee la misma del lado derecho.
ESP
Abra la caja, retire el embalaje protectory revise el contenido. Usted debe tener: 1.SPB 360, 2.Palanca de perforación, 3.La fuente de alimentación, 4.JUEGO DE TORNILLOS, 5.Instrucciones de uso.
Insérez le levier de poinconnage du coté gauche de la machine.
Puis du coté droit.
Retirez les cartons de protection, verifi ez les accessoires: 1.SPB360, 2.Levier de poinçonnage, 3.Bloc transformateur, 4.Set de vis, 5.Mode d‘empoi.
Odstraňte karton. Překontrolujte obsah balení: 1.SPB 360, 2.Děrovací páka, 3.Napájecí zdroj, 4.SADA ŠROUBŮ, 5.Návod k použití.
Nasaďte děrovací páky na levé straně stroje,
nyní klikněte na pravé straně.
Verpakking verwijderen. Levering controleren: 1.SPB 360, 2.Ponshendel, 3.Tafel netdeel, 4.SCHROEVENSET, 5.Gebruiksaanwijzing.
Ponshendel aan de linker kant van de machine in hangen
en dan aan de rechter kant in klinken.
Odstráňte kartón. Prekontrolujte obsah balenia: 1.SPB 360, 2.Dierovacia páka, 3.Napájací zdroj, 4.SADA SKRUTIEK, 5.Návod na použitie.
Nasaďte dierovacie páky na ľavej strane stroja,
teraz kliknite na pravej strane.
Откройте упаковку и проверьте содержание коробки. В коробке должно быть: 1.Переплетчик SPB 360, 2.Ручка перфорации, 3.Блок питания, 4.НAБOP BИНТOB, 5.Инструкция по эксплуатации.
Rimuovere le protezioni e verifi care il contenuto della confezione.
Agganciare la leva di foratura sul lato sinistro della macchina.
e allinearlo sul lato destro.
Page 5 of 18

Text on page 6
AUFSTELLEN ● SETUP ● COLOCACIÓN ● MISE EN PLACE ● SESTAVENÍ ● PLAATSEN ● ZOSTAVENIE ● УСТАНОВKA ● MESSA IN FUNZIONE
Eingerasteten Stanzbügel mit Hilfe des beiliegenden Schraubenset an der Maschine befestigen.(siehe Abbildung). Tischnetzteil mit der Maschine verbinden.
Die Maschine ist jetzt einsatzbereit.
Use the supplied Allen key, screws and washers to fi x the leaver to the shaft. Plug the power supply into the machine.
Your machine is now ready for operation.
Fije la palanca a la máquina usando el tornillo provisto (vea dibujo). Conecte la fuente de alimentación eléctrica a la máquina.
Ahora la máquina está lista para el uso.
Fixer le levier de poinçonnage à l‘aide des vis se trouvant dans le setde vis fourni. (voir croquis ci dessus). Branchez le cordon d‘alimentation du bloc transformateur à la machine.
L‘appareil est maintenant prêt à l‘emploi.
Zajistěte děrovací páky přiloženými šrouby (viz obrázek). Připojte napájecí zdroj.
Zařízení je nyní provozuschopné.
De geplaatste Pons hendel met hulp van de meegeleverde schroevenset aan de machine bevestigen (Zie afbeelding). Het Stroomnetdeel op de machine aansluiten.
De machine is nu bedrijfsklaar.
Zaistite dierovacie páky priloženými skrutkami.(viď obrázok) Pripojte napájací zdroj.
Zariadenie je teraz prevádzkyschopné.
Fissare la leva alla macchina usando la vite fornita (vedi disegno). Collegare l‘alimentazione elettrica della macchina.
Ora la macchina è pronta per l‘uso.
ESP
RUS
Page 6 of 18

Text on page 7
ESP
VORBEREITEN ● PREPARE ● PREPARACIÓN ● PRÉPARATION ● PŘÍPRAVA ● VOORBEREIDEN ● PRÍPRAVA ● ПОДГОТОВКА ● MESSA IN FUNZIONE
Papieranschlag: Am Plexiglas befi ndet sich der Seitenanschlag für DIN A4 / A5. Diesen entsprechend des Papierformats einstellen. Die auszuschaltenden Stanzstempel können am Plexiglas direkt abgelesen werden.
Auswahl des Spiraldurchmessers. Mit der am Plexiglas-Anschlag angebrachten Maßtabelle läßt sich der richtige Spiraldurchmesser leicht ermitteln. Den zu bindenden Block waagrecht in den Anschlag der Maßtabelle legen. Der benötigte Spiraldurchmesser lässt sich jetzt rechts an der Skala ablesen.
Paper guide: To adjust formats A4 / A5 turn the paper guide into corresponding position. Disengage the punching pins shown on the perspex guide.
Determine the binding diameter. Put the edge of the book against the measuring scale on the perspex. Read the diameter of the binding element.
Tope de papel: El tope de papel para los formatos DIN A4 / A5 se encuentra en el plexiglass. Ajustarlo según el formato del papel. Pueden leerse los punzones por desembragar directamente en el plexiglass.
Selección del diámetro de las espirales. La escala de medida colocada en el tope plexiglass permite determinar fácilmente el buen diámetro de la espiral. Meter el bloque por encuadernar horizontalemente contra el tope de la escala de medida. Puede leerse entonces el diámetro preciso de la espiral en la escala a la derecha.
Butée de papier: La butée latérale pour les formats DIN A4 / A5 se trouve sur le plexiglas. Régler celle-ci selon le format du papier. Les poinçons de perforation à débrayer peuvent être identifi és directement sur le plexiglas.
Sélection du diamètre des spirales. L’échelle de mesure placée sur la butée plexiglas permet de déterminer facilement le bon diamètre de la spirale. Mettre le bloc à relier horizontalement contre la butée de l’échelle de mesure. Relever ensuite le diamètre requis de la spirale sur la côté droit de l’échelle.
Doraz papíru: Na plexiskle se nachází boční doraz pro DIN A4 / A5. Doraz nastavit odpovídajícímu formátu papíru. Vypnuté razící nože je možno přečíst přímo na plexiskle.
Výběr průměru spirály: Se stupnicí a dorazem na plexiskle lze snadno stanovit správný průměr spirály. Svazovaný blok vodorovně vložit k dorazu na stupnici. Požadovaný průměr spirály lze nyní přečíst vpravo na měřítku.
Papier stopper: De zijdelingse stop voor DIN A4 / A5 bevind zich op het plexiglas. Afstellen op het papier formaat. De Pons stempels die uitgeschakeld dienen te worden kunt u direct afl ezen op het plexiglas.
Grootteselectie spiralen. Met de op het plexiglas aangebrachte schaal indicatie kunt u eenvoudig de juiste spiraal diameter bepalen. Het te binden blok loodrecht tegen de aanleg van de meetschaal legen, waardoor u de juiste diameter recht op de schaal kunt afl ezen.
Doraz papiera: Na plexiskle sa nachádza bočný doraz pre DIN A4 / A5. Doraz nastaviť zodpovedajúcemu formátu papiera. Vypnuté raziace noža je možné prečítať priamo na plexiskle.
Výber priemeru špirály: So stupnicou a dorazom na plexiskle možno ľahko stanoviť správny priemer špirály. Zväzovanie blok vodorovne vložiť k dorazu na stupnici. Požadovaný priemer špirály možno teraz prečítať vpravo na meradle.
Fermo carta: Per regolare i formati A4 / A5 posiziona il fermo carta nella posizione corrispondente. Escludere i punzoni indicati sulla guida nel plexiglass.
Scelta del diametro. Posizionare il prodotto da rilegare sulla scala di misurazione escegliere il diametro adeguato.
RUS
Page 7 of 18

Text on page 8
EINSTELLEN ● ADJUST ● RÉGLER ● AJUSTE ● NASTAVENÍ ● INSTELLEN ● NASTAVENIE ● УСТАНОВKA ● REGOLAZIONE
Papieranschlag auf entsprechendes Format einstellen. Feststellschraube an der Rückseite lösen, Anschlag verschieben, Feststellschraube anziehen.
Adjusting paper guide to the corresponding paper size. Release attachment screw on the rear, adjust paper guide and fasten attachment screw.
Ajustar el tope del papel al tamaño correspondiente. Afl oje el tornillo de sujeción, ajuste el tope de papel y aprete el tornillo.
ESP
Ajustage de la butée du papier selon le format du papier. Desserrer la vis de serrage à l‘arrière, mettre la buttée du papier et resserrer la vis de serrage.
Doraz nastavte podle formátu. Stavěcí šroub povolte, nastavte podle potřeby a opět utáhněte.
Papieraanleg op corresponderende formaat instellen. Schroef aan achterkant losmaken, aanleg verschuiven, schroef vastmaken.
Zarážku nastavte podľa formátu. Skrutku povoľte, nastavte podľa potreby a opäť utiahnite.
RUS
Impostare il fermo della carta sul formato appropriato. Rilasciare la vite di bloccaggio sul retro, spostare il fermo e stringere la vite di bloccaggio.
Page 8 of 18

Text on page 9
EINSTELLEN ● ADJUST ● RÉGLER ● AJUSTE ● NASTAVENÍ ● INSTELLEN ● NASTAVENIE ● УСТАНОВKA ● REGOLAZIONE
A4 Format einstellen, kein Druckstück ziehen.
A5 Format einstellen, kein Druckstück ziehen.
Adjust size A4 paper, do not pull pins.
Adjust size A5 paper, do not pull pins.
ESP
Ajuste el formato A4, no levantar punzones.
Ajuste el formato A5, no levantar punzones.
Réglage du format A4, ne tirer pas pièces de pression.
Réglage du format A5, ne tirer pas pièces de pression.
Nastavení formátu A4, nevytahujte tlakové raznik.
Nastavení formátu A5, nevytahujte tlakové raznik.
A4-formaat instellen, trek niet ponsstempel.
A5-formaat instellen, trek niet ponsstempel.
Nastavenie formátu A4, nevyťahujte tlakové kolíkov.
Nastavenie formátu A5, nevyťahujte tlakové kolíkov.
RUS
Regolare il formato A4, non sollevare i punzoni.
Regolare il formato A5, non sollevare i punzoni.
ESP
RUS
8.5" Format einstellen: Druckstück 8.5“ ziehen.
11" Format einstellen: Druckstück 11“ ziehen.
Adjust size 8,5“ paper, pull 8.5“ pin.
Adjust size 11“ paper, pull 11“ pin.
Ajuste el formato 8.5": Levantar el 8.5º punzon.
Ajuste el formato 11" : Levantar el 11° punzon.
Réglage du format 8.5", tirer la 8.5“e pièce de pression.
Réglage du format 11" : Tirer la 11“e pièce de pression .
Nastavení formátu 8.5, vytáhněte razník 8.5“
Nastavení formátu 11" : vytáhněte 11“ razník.
8.5" formaat instellen, ponsstempel 8.5“ trekken.
11"- formaat instellen - ponsstempel 11“ trekken.
Nastavenie formátu 8.5", vytiahnite tlakový kolík 8.5“
Nastavenie formátu 11" : vytiahnite tlakový kolík 11“.
Regolare il formato 8.5”: Sollevare il punzone 8.5”.
Regolare il formato 11”: Sollevare il punzone 11”.
Page 9 of 18

Text on page 10
STANZEN ● PUNCH ● PERFORACIÓN ● PERFORATION ● DĚROVÁNÍ ● PONSEN ● DIEROVANIE ● ПЕРФОРАЦИЯ ● FORATURA
Max. 17 Seiten 80 g/m² dicke Buchblocks in Lagen stanzen. Empfohlene Stanzstärke 15 - 17 Blatt. Plastik und dickere Deckblätter nur einzeln stanzen.
Papierlage in Stanzschacht einführen und am Anschlag anstellen. Papier muß plan stehen, evtl. noch einmal ausrichten.
Stanzhebel nach vorn bis zum Anschlag drücken und wieder ganz zurückführen. Maschine mit der anderen Hand halten.
Punch max. 17 pages 80 g/m². Recomended punching: 15 – 17 pages. Punch plastics and thicker covers separately.
Insert paper into punching slot, slide the paper against the paper guide. Paper must stand evenly, if not align it again.
Press punching lever forward until it stops, then return to original position. Hold the machine with the other hand.
Max. capacidad de perforación: 17 hojas de 80 gr./m². Es aconsejable perforar 15 - 17 hojas cada vez. Perfore el plástico y tapas gruesaspor separado.
Introduzca el bloque de papel en la cavidad de perforado y lévelo al tope. El papel debe estar plano y debe alinearse de nuevo si fuera preciso.
Presionar la palanca de perforar hacia adelante hasta el fi n y devuélvala del todo hacia atrás. Sujete la máquina con la otra mano.
Perforer des blocs non reliés par pincée d’un maximum de 17 feuilles (80 g/m²). Perforer les couvertures en plastique et plus épaisses qu’à l’unité.
Introduire les pincées de papier dans la gorge de perforation et positioner contra la butée. Le papier doit être à plat. Régler à nouveau éventuellement.
Appuyer sur le levier de perforation vers l’avant jusqu’à ce qu’il bute et ramener à fond en arrière. Maintenir la machine avec l’autre main.
Max. 17 stran 80 g/m² silných knižních bloků razit ve vrstvě. Doporučená razicí tloušťka je 15 – 17 listů. Plastové a silnější titulní strany razit jen jednotlivě.
Vrstvu papíru vložit do razicí šachty až k dorazu. Papír musí rovně stát, eventuelně ještě jednou srovnat.
Razicí páku zatlačit až k dorazu a pak zase zcela vrátit zpět. Stroj držet druhou rukou.
Pons maximaal 17 vel 80 g/m². Aanbevolen hoeveelheid: 15 -17 vellen. Pons plastic en dikkere kaften per stuk.
Papier invoeren in ponsschacht, schuif papier tegen papieraanleg. Papier dient vlak te liggen, eventueel herpositioneren.
Ponshendel naar voren tot de aanleg drukken en terug naar uitgangspositie. Machine met andere hand vasthouden.
Max. 17 strán 80 g / m² silných knižných blokov raziť vo vrstve. Odporúčaná raziaci hrúbka je 15 - 17 listov. Plastové a silnejší titulnej strany raziť len jednotlivo.
Vrstvu papiera vložiť do raziace šachty až k dorazu. Papier musí rovno stáť, eventuálne ešte raz porovnať.
Raziaci páku zatlačiť až k dorazu a potom zase úplne vrátiť späť. Stroj držať druhou rukou.
Foratura massima: 17 fogli da 80 g/m. Foratura consigliata: 15-17 fogli. Forare separatamente i fogli di plastica e le copertine.
Inserire la carta da forare e farla scorrere contro la guida. La carta deve essere allineata in modo uniforme.
Per forare, abbassare la leva di foratura e riportarla poi alla posizione originale.
ESP
RUS
Page 10 of 18

Text on page 11
BINDEN ● BINDING ● ENDUADERNADO ● RELIURE ● VÁZÁNÍ ● BINDEN ● VIAZANIE ● ПЕРЕПЛЕТ ● RILEGATURA
Spirale von Hand in die ersten 3 - 4 Perforationslöcher eindrehen.
Hauptschalter an. Gummiwalze dreht sich. Block gegen die Gummiwalze halten.
Insert coil in the fi rst 3 or 4 perforated holes by hand.
Switch machine on so roller rotates. Hold block against the rubber roller.
Enroscar la espiral por las3 o 4 primeras perforaciones.
Cilindro de goma interruptor ON. Apoyar el bloque en el cilindro de goma.
Insérer la spirale dans les premiers trous perforés.
Appuyer sur l‘interrupteur principal. Positionner le bloc contre le rouleau d’entrainement en caoutchouc.
Vložte otáčením ručně spirály do prvních 3 – 4 otvorů bloku.
Zapnout hlavní vypínač. Gumový váleček se točí. Držte blok proti gumovému válečku.
De Spiraal in de eerste 3-4 perforatie gaten indraaien.
Hoofdschakelaar aan. Rubberen rol draait. Blok tegen de rubberwals aan houden.
Vložte otáčaním ručne špirály do prvých 3 - 4 otvorov bloku.
Zapnúť hlavný vypínač. Gumový valček sa točí. Držte blok proti gumovému valčeka.
Inserire manualmente la spirale in almeno 3-4 fori.
Accendere la macchina. Appoggiare il prodotto da rilegare al rullo di gomma.
ESP
RUS
Page 11 of 18

Text on page 12
BINDEN ● BINDING ● ENDUADERNADO ● RELIURE ● VÁZÁNÍ ● BINDEN ● VIAZANIE ● ПЕРЕПЛЕТ ● RILEGATURA
Den spiralisierten Block an den rechten Anschlag (Abdeckung) anstellen und Spirale in das Messer einführen. Handhebel bis zum Anschlag nach unten drücken. Spiralende wird automatisch abgeschnitten und umgebogen. Block drehen und auf gegenüberliegender Seite den Vorgang wiederholen.
Coil will be inserted.
Put the spiralised block right-aligned (at the cover) into the cutting unit. Press the punching lever as far as it will go. Spiral gets cut and crimped. Turn the block and repeat the operation at the opposite end.
Se enrosca la espiral.
Colocar el bloque encuadernado con espirales contra el tope derecho (revestimiento) e introducir la espiral en la cuchilla. Empujar la palanca de mano hacia abajo hasta el tope. La extremidad de la espiral es cortada y doblada automáticamente. Volver el bloque y repetir el proceso al lado opuesto.
La spirale est inséré.
Placer le bloc relié par spirale contre la butée droite (recouvrement) et introduire la spirale dans le couteau. Pousser le levier vers le bas jusqu’à la butée. L’extrémité de la spirale se découpe et se recourbe automatiquement. Tourner le bloc et répéter la procédure de l‘autre côté.
Spirála (pružina) bude natočena.
Svazovaný blok nastavit k pravému dorazu (krytu) a spirálu dát do nože. Ruční páku zatlačit až k dorazu dolů. Spirála bude automaticky na konci odříznuta a ohnuta. Blok otočit a na obrácené straně opakovat postup.
De Spiraal word ingedraait.
De gespiraaliseerde blok aan de rechter aanlegleggenen de spiraal onder het mes invoeren. De hendel tot aan de aanschlag naar beneden drucken. De Spiraal word afgesneden en omgebogen. De Blok draaien en de tegenoverliggende zijde op de zelfde manier bewerken.
Špirála (pružina) bude natočená.
Zväzovanie blok nastaviť k pravému dorazu (krytu) a špirálu dať do noža. Ručnú páku zatlačiť až k dorazu dolu. Špirála bude automaticky na konci odrezaná a ohnutá. Blok otočiť a na obrátenej strane opakovať postup.
La spirale si inserisce.
Allineare il prodotto rilegato a destra (sul coperchio) nell‘unità di taglio. Premere la leva di foratura in modo che la spirale venga tagliata e piegata. Girare il blocco e ripetere l‘operazione all‘estremità opposta.
ESP
RUS
Page 12 of 18

Text on page 13
BINDEN ● BINDING ● ENDUADERNADO ● RELIURE ● VÁZÁNÍ ● BINDEN ● VIAZANIE ● ПЕРЕПЛЕТ ● RILEGATURA
Für Metallspiralen muss eine SC Zange verwendet werden. Für Metallspiralen ist die Abschneide- und Umbiegeeinheit am Gerät nicht geeignet.
For metal spirals a SC-Pliers has to be used. Cutting and crimping unit of the machine is not adequate for metal spirals.
Nach dem Eindrehen die Spiralenden mit der SC Zange abschneiden und umbiegen.
ACHTUNG!
Markierung muß nach oben zeigen. SC Zange ist für Metall - und Plastikspiralen geeignet. ( SC Zange Sonderzubehör ).
After inserting, cut and bend the ends with the SC cutting and bending pliers.
ATTENTION!
Después del enroscado, cortar y doblar las extremidades de la espiral por medio de la pinza SC.
ESP
Hay que emplear una pinza SC para cortar las espirales de metal. La unidad cortadora y dobladora en el aparato es impropia para espirales de metal.
Après l’insertion de la spirale métallique, couper et recourber avec la pince SC.
La pince SC est recommandée pour découper les spirales métalliques. L’unité pour découper et recourber installée sur cet appareil est impropre aux spirales métalliques.
Pro kovové spirály musí být použity SC kleště. Pro kovové pružiny není řezací a ohýbací nástroj vhodný.
Po natočení odstřihněte a ohněte konce pružiny kleštěmi SC.
Voor metaal spiralen moet een SC tang gebruikt worden. Voor metaal spiralen is de geintegreerde afsnij en buig inrichting niet geschikt.
Pre kovové špirály musia byť použité SC kliešte. Pre kovové pružiny nie je rezací a ohýbacie nástroj vhodný.
¡ATENCION!
La marca tiene que encontrarse arriba. La pinza SC es apropiada para espirales metálicas y plásticas. (La pinza SC es un accesorio especial).
Extrémité recourbée d’une spirale.
ATTENTION!
Le point rouge doit être positionné vers le haut. La pince SC peut être utilisée pour la spirale plastique et métallique (la pince SC est un accessoire en option).
POZOR!
Na het indraaien de spiraal einden met de SC tang Afsnijden en ombuigen.
De markering moet naar boven wijzen. De SC tang is geschikt voor metaal en plastic spiralen. (SC tang is optioneel - en speciaal toebehoor).
Po natočení odstrihnite a ohnite konce pružiny kliešťami SC.
POZOR!
Značka musí byť v hornej časti. SC kliešte možno použiť pre kovové alebo plastové špirály (pružiny). (SC kliešte špecializované príslušenstvo).
Extremidad doblada de una espiral.
Značka musí být v horní části. SC kleště lze použít pro kovové nebo plastové spirály (pružiny). (SC kleště specializované příslušenství).
RUS
The mark must be on the top. The SC pliers can be used for metal and plastic coils. ( SC pliers special accessories ) .
Не используйте режущий блок аппарата для обрезки металлической спирали. Для обрезки металлической спирали используйте специальные SC - кусачки.
После вставки, отрежьте и загните концы спирали с помощью SC плоскогубцев.
Per le spirali metalliche è necessario utilizzare una pinza SC.
Dopo aver inserito la spirale, tagliare e piegare la spirale con l’apposita pinza SC.
Отметка должна быть c верху блока. Кусачки SC могут ис пользоваться для работы с металлическим и пластмассовым пружинами.
ATTENZIONE!
Le pinze SC possono essere utilizzate sia per spirali metalliche che per quelle in plastica.
Premere il pedale per iniziare la foratura.
Page 13 of 18

Text on page 14
WARTUNG ► ZUBEHÖR ● MAINTENANCE ► ACCESSORIES ● MANTENTIMIENTO ► ACCESORIOS ● MAINTENANCE ► EQUIPEMENT ● ÚDRŽBA ► ZAŘÍZENÍ ● ONDERHOUD ► EQUIPMENT ● ÚDRŽBA ► ZARIADENIE ● УХОД ► ПРИНАДЛЕЖНОСТИ ● MANUTENZIONE ► ACCESSORI
Reinigung:
Nur mit trockenem oder leicht feuchtem Tuch abwischen. Keine Lösungsmittel verwenden. Aufdrucke können sich lösen.
Clean with a dry or slighty moist cloth . Do not use solvents. Sticker may detach.
Schublade regelmäßig leeren. Schublade herausziehen und Papierabfall ausschütten.
Nach ca. 250 Stanzungen muß die Schublade geleert werden!
Empty drawer from time to time. Pull out drawer and empty out the papershavings.
Limpieza:
Vacie la bandeja de residuos periódicamente.
Pinza SC:
- Para espirales de metal y plástico
- Manejo fácil
!Después de aprox. 250 perforaciónes debe ser bandeja vacia!
ESP
Nettoyage:
Essuyer avec un chiffon sec ou humide. Ne pas utiliser de solvant. Les inscriptions pourraient s’effacer.
Vider le tiroir régulièrement. Sortir le tiroir et jeter les rognures de papier.
Pince SC:
- Pour spirales plastiques et métalliques.
- Maniement aisé.
Après environ 250 coups devrait être tiroir vide!
SC-pliers:
- for wire and plastic spirals
- easy to handle
The waste tray has to be emptied after 250 punches!
Limpie con un paño seco o poco húmedo. No utilice disolventes.
SC-Zange:
- für Metall- und Plastikspiralen
- einfache Handhabung
Čistěte pouze suchým nebo navlhčeným hadříkem, nepoužívejte žádné čisticí prostředky.
Zásuvku na odpad vysypávejte pravidelně. Vytáhněte ji, vysypte papírový odpad a vraťte na původní místo.
SC kleště:
- Snadné použití SC kleště pro plastové a kovové pružiny.
Po cca. 250 perforace je třeba vyprázdnit zásuvku na odpad!
Reiniging:
Veeg met een droge of licht vochtige doek. Gebruik geen oplosmiddelen, kunnen afdrukken worden opgelost.
SC-Tang:
- voor metaal en plastic spiralen
- eenvoudig in gebruik
Na ongeveer 250 ponsen zou de afvallade worden geleegt!
Čistenie :
Afvallade regelmatig legen. Afvallade uittrekken en papierafval weggooien.
Čistite iba suchou alebo navlhčenou handričkou, nepoužívajte žiadne čistiace prostriedky.
Zásuvku na odpad vysypávajte pravidelne. Vytiahnite ju, vysypte papierový odpad a vráťte na pôvodné miesto.
SC kliešte:
- Ľahké použitie SC kliešte pre plastové a kovové pružiny.
Po cca. 250 perforácie je treba vyprázdniť zásuvku na odpad!
RUS
Pulizia:
Pulire la macchina con un panno asciutto o leggermente umido. Non usare solventi, gli adesivi si potrebbero staccare.
Svuotare il cassetto di volta in volta. Estrarre il cassetto e svuotare gli sfridi.
Il cassetto degli sfridi deve essere svuotato dopo 250 forature!
SC-плоскогубцы:
- Легкие в применении SC-плоскогубцы для работы с металлическими и пластмассовыми пружинами.
Pinza SC:
- Per spirali metalliche o in plastica
- Facile utilizzo
Page 14 of 18

Text on page 15
TECHNISCHE DATEN ● TECHNICAL DATA ● DATOS TECNICOS ● DONNES TECHNIQUES ● TECHNICKÁ DATA ● TECHNISCHE GEGEVENS ● TECHNICKÉ ÚDAJE ● ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ ● DATI TECNICI
Länge x Breite x Höhe Length x Width x Height Largo x Ancho x Alto Longueur, largeur, hauteur Délka x šířka x výška Lengte x breedte x hoogte Dĺžka x šírka x výška Габариты Lunghezza x Larghezza x Altezza
Gewicht Weight Peso Poids Hmotnost Gewicht Hmotnosť Вес Peso
Anschluss: Power supply: Alimentación eléctrica: Connexion électrique: Napájení: Aansluiting: Napájanie: Питание: Alimentazione elettrica:
36 cm x 49 cm x 25 cm
230/250V/50Hz/90W 115/200V/60Hz/90W
Spiralen Ø Processable Ø Ø que se pueden trabajar Diamètre de la spirale Zpracovatelný Ø Verwerkbare Ø Spracovateľný Ø Ø пружин Diametri di spirale
für Plastik- und Drahtspiralen geeignet bis max. ø 20 mm for plastic and metal spirals max 20 mm diameter para espirales plásticos y de metal de hasta 20 mm de diámetro pour spirales plastiques et métalliques d‘un ø de 20 mm max. vhodný pro plastové a drátěné spirály nahoru. ø 20 mm voor plastic en draadspiralen geschikt tot max. ø 20 mm vhodný pre plastové a drôtené špirály hore. ø 20 mm подходит для пластиковой и проволочной спирали диаметром до 20 мм
Max. Blockstärke Max. binding thickness Espesor máximo del cuaderno. Epaisseur de reliure Max. tloušťka Max. binddikte Max. hrúbka Толщина переплетаемого блока Spessore max. rilegabile
max. 17 mm / 170 Blatt max.17 mm / 170 sheets* hasta 17mm / 170 hojas* jusqu‘à 17 mm / 170 feuilles* 17 mm / 170 listů 17 mm / 170 bladen* 17 mm / 170 listov 17 мм / 170 листов fi no a 17 mm / 170 fogli
Papier Paper Papel Papier Papír Papier Papier Бумага Carta
70/80 g/m² 70/80 gr/m² (20 # stock) 70/80 gr/m² de 70/80 g/m² 70/80 g/m² 70/80 g/m² 70/80 g/m² 70/80 г / м ² 70/80 g/m²
Page 15 of 18

Text on page 16
TECHNISCHE DATEN ● TECHNICAL DATA ● DATOS TECNICOS ● DONNES TECHNIQUES ● TECHNICKÁ DATA ● TECHNISCHE GEGEVENS ● TECHNICKÉ ÚDAJE ● ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ ● DATI TECNICI
Stanzkapazität Punching capacity Capacidad de perforación Capacité de perforation Děrovací kapacita Ponsdikte Dierovacia kapacita Производительность перфорации Nr. di pezzi / ora
max 8.000 Blatt / h 8,000 sheets / h 8.000 hojas / hora como máximo. 8.000 feuilles / heure maximum. max. 8.000 l / hod 8.000 vel / h max. 8.000 l / hod макс. 8 000 листов / час 8.000 / ora
Stanzstärke Punching thickness Grosor de perforación Epaisseur de perforation Tloušťka děrování Ponsdikte Hrúbka dierovania Перфорация Spessore di foratura
bis zu 1.7 mm / 17 Blatt up to 1.7 mm / 17 sheets hasta 1.7 mm / 17 hojas* (jusqu‘à 1.7 mm / 17 feuilles až 1.7 mm / 17 listů max. 1.7 mm / 17 vellen až 1.7 mm / 17 listo до 1.7 мм / 17 листов fino a 1.7 mm / 17 fogli (carta 70/80 g/m²)
Bindeleistung Blöcke per Stunde No. of books output per hr N.º de libros terminados por hora Nb de cahiers réalisés / h Maximální počet bloků za hodinu Zendvermogen blokken per uur Maximálny počet blokov za hodinu Максимальное количество блоков в час Nr. di pezzi / ora
Verstellbarer Randabstand Adjustable margin control Distancía al margen variable Marge de perforation réglable Nastavitelná vzdálenost okrajů Verstelbare randafstand Nastaviteľná vzdialenosť okrajov Регулируемое расстояние края Distanza dal margine regolabile
nein no no non ne niet ne пет no
Max.Stanzbreite Max.punchin width Formats Ancho de trabajo Prac. šířka Verwerkbare breedte Prac. šírka Максимальный формат Formato max. di foratura
Page 16 of 18

Text on page 17
EG-Konformitäts-Erklärung im Sinne der EG-Richtlinien EC conformity declaration according to the EC guidelines Declaración de conformidad de acuerdo con las directivas de la UE Déclaration de conformité CE selon les directives CE Prohlášení o shodě s předpisy ES ve smyslu směrnic ES EG-conformiteitsverklaring volgens EG-richtlijnen Vyhlásenie o zhode ES v zmysle smerníc ES Декларация соответствия согласно требованиям EC Dichiarazione di conformita’ secondo le linee guide UE
für Maschinen 2006/42/EG, Anhang II for machines 2006/42/EC, appendix II para máquinas 2006/42/EG, anexo II pour machines 2006/42/CE, appendice II pro Strojní zařízení 2006/42/ES, Příloha II voor Apparaten 2006/42/EG, Bijlage II pre Prístroje 2006/42/ES, Príloha II для Оборудования 2006/42/EC, Приложение II per macchine 2006/42/CE, appendice II
Die Anlage bzw. Maschine, The construction of the machine, La construcción de la máquina , La construction de la machine, Strojní zařízení resp. Stroj, De constructie van de machine, Zariadenie resp. prístroj, Оборудование, La costruzione della macchina
Fabrikat: ● Model: ● Producto: ● Modèle: ● Model: ● Model: ● Produkt: ● Модель: ● Modello:
Handstanze für Spiralbindung mit elektrischer Spiralisiereinheit und integrierter Spiralabschneide- und Umbiegevorrichtung. Manual operated punch with electrical spiral inserting unit, integrated spiral cutting and crimping unit . Perforadora manual con unidad eléctrica insertadora de espirales y dispositivo cortador y doblador de espirales integrado. Perforeuse manuelle avec unité électrique d‘insertion de spirales et dispositif intégré pour couper et recourber les spirales. Ruční děrovače pro spirálovou vazbu/elektrický vázací stroj / ruční zařízení pro řezání a ohýbání pružiny. Manuele stans/pons voor spiraalbinding met een electrische spiraleer eenheid en geintegreerde spiraalsnij - en ombuig inrichting. Ručné dierovače pre špirálovú väzbu / elektrický viazací stroj / ručné zariadenia na rezanie a ohýbanie pružiny. Ручный перфоратор / Ручное устройство для обрезки и загиба пружины. Macchina foratrice manuale e rilegatrice elettrica per spirali in plastica.
Typ: ● Type: ● Tipo: ● Type: ● Typu: ● Type : ● Typ: ● Наименование: ● Tipo:
SPB 360
wurde entwickelt, konstruiert und gefertigt in Übereinstimmung mit den o.g. EG-Richtlinien, in alleiniger Verantwortung von: was developed, constructed and produced in accordance with the EC guidelines and with the sole responsibility of: ha sido diseñada, construida y fabricada de conformidad con las antes citadas directivas comunitarias, bajo la exclusiva responsabilidad de: a été développée, construite et produite conformément aux directives et avec la seule responsabilité de: byl vyvinut, zkonstruován a vyroben v souladu se shora uvedenými směrnicemi ES jediným odpovědným subjektem: is ontwikkeld, gebouwd en geproduceerd in overeenstemming met de EG-richtlijnen en op enige verantwoordelijkheid van: bol vyvinutý, navrhnutý a vyrobený v zhode s vyššie uvedenými smernicami ES s priamou zodpovednosťou: было спроектировано и произведено в соответствии с руководящими принципами EC исключительной ответственностью: è stata progettata e costruita in conformità alle direttive comunitarie precedentemente citate sotto la responsabilità esclusiva della:
Firma: ● Company: ● Empresa: ● Société: ● Firmou: ● Firma: ● Spoločnosti: ● Фирма: ● Società:
Chr. Renz GmbH, 73540 Heubach / Germany
Page 17 of 18

Text on page 18
EG-Konformitäts-Erklärung im Sinne der EG-Richtlinien EC conformity declaration according to the EC guidelines Declaración de conformidad de acuerdo con las directivas de la UE Déclaration de conformité CE selon les directives CE Prohlášení o shodě s předpisy ES ve smyslu směrnic ES EG-conformiteitsverklaring volgens EG-richtlijnen Vyhlásenie o zhode ES v zmysle smerníc ES Декларация соответствия согласно требованиям EC Dichiarazione di conformita’ secondo le linee guide UE
Folgende harmonisierte Normen wurden angewandt: The following harmonized specifi cations were applied: Se han aplicado las siguientes normas armonizadas: Une harmonie des normes a été appliquée: Uplatněné harmonizovane normy: De volgende harmoniserende specifi caties zijn toegepast: Nasledujúci harmonizovaných noriem boli uplatnené: Были применены следующие согласованные технические требования: Sono state applicate le seguenti normative:
EN ISO 12100: 2010
Sicherheit von Maschinen, Geräten und Anlagen Security of machines, units and systems Seguridad de máquinas, instalaciones y equipos Sécurité des machines, unités et système Bezpečnost strojních zařízení, vybavení a zařízení Veiligheid van machines, apparaten en toestellen Bezpečnosť strojných zariadení, vybavenia a zariaden Безопасность машин, устройств и систем Sicurezza del macchinario
Eine Technische Dokumentation ist vollständig vorhanden. Die entsprechende Betriebsanleitung liegt in folgenden europäischen Sprachen vor: Deutsch, Englisch, Französisch, Spanisch, Tschechisch, Holländisch, Slowakisch, Russisch, Italienisch.
A complete technical documentation as well as the relevant manual are available in the European languages: German, English, French, Spanish, Czech, Dutch, Slovak, Russian, Italian.
Se dispone de una documentación técnica completa y de las instrucciones de servicio pertenecientes a la máquina en los siguientes idiomas europeos: Alemán, inglés, frances, espanol, checo, holandés, eslovaco, ruso, italiano.
Une documentation complète technique ainsi que la notice d‘utilisation sont disponibles dans les langages européens: Allemand, anglais, français, espagnol, tchèque, néerlandais, slovaque, russe, italien.
Existuje příslušná kompletní technická dokumentace. Návod k obsluze existuje v těchto evropských jazycích: Němčina, angličtina, francouzština, španělština, čeština, holandština, slovenština, ruština, italština.
Een technische documentatie is volledig aanwezig. De gebruiksaanwijzing is in de volgende Europese talen aanwezig: Duits, Engels, Frans, Spaans, Tsjechisch, Nederlands, Slowaaks, Russisch, Italiaans.
Technická dokumentácia je k dispozícii. Zodpovedajúce návod na použitie je k dispozícii v nasledujúcich európskych jazykov: Nemčina, angličtina, francúzština, španielčina, čeština, holandčina, slovenčina, ruština, taliančina.
C‘è una documentazione tecnica completa e le istruzioni di servizio che appartengono alla macchina in le seguenti lingue europee: Tedesco, inglese, francese, spagnolo, ceco, olandese, slovacco, russo, italiano.
Heubach, 01. 01. 2012
General Manager Director Gerente Gérant Generální ředitel Algemeen Directeur Generálny riaditeľ Генеральный менеджер Direttore
Page 18 of 18 · End of manual
Quick start
- Unpack: remove the protective packing and check that you have the SPB 360, punching lever, power supply, screw set and operating manual.
- Fit the lever and power: hook the punching lever onto the shaft on the left side, stretch it over to the right side, fix it with the supplied Allen key, screws and washers, then plug the power supply into the machine.
- Prepare the punch: before first use, punch scrap paper to clean the rust preventative from the punch dies. If the machine came from a cold room, wait 2 h before switching it on.
- Set the paper guide: release the attachment screw on the rear, move the guide to your paper size and tighten the screw. For A4 or A5 do not pull pins. For 8.5" or 11" paper, pull the matching pin.
- Choose the coil: put the edge of the book against the measuring scale on the perspex guide and read the coil diameter.
- Punch: insert up to 17 pages of 80 g/m² paper against the paper guide, press the punching lever forward until it stops, then return it. Hold the machine with your other hand. Punch plastics and thicker covers separately.
- Insert the coil: thread the coil into the first 3 or 4 holes by hand, switch the machine on so the rubber roller turns, and hold the book against the roller until the coil is inserted.
- Cut and crimp: put the book right-aligned into the cutting unit and press the lever as far as it will go. Turn the book and repeat at the other end.
Troubleshooting
| Problem | Likely cause | Fix (from the manual) |
|---|---|---|
| Punched holes have spots or marks on new paper | Rust preventative is still on the punch dies | Punch scrap paper several times before first use until the holes are clean. Page 4 |
| The machine came from a cold room | Condensation water may have formed inside | After a major change of temperature, wait 2 h before you turn the machine on. Page 4 |
| Holes are not lined up along the edge | Paper is not standing evenly against the paper guide | Slide the paper against the paper guide so it stands evenly, and realign it if needed before punching. Page 10 |
| Holes are punched off the edge of 8.5" or 11" paper | The matching pin was not pulled for that size | Pull the 8.5" pin for 8.5" paper or the 11" pin for 11" paper. Do not pull pins for A4 or A5. Page 9 |
| Metal spiral ends do not cut or crimp | The built-in cutting and crimping unit is not suitable for metal spirals | Cut and bend metal spiral ends with the SC pliers (special accessory), with the mark on the top. Page 13 |
| Paper shavings build up in the machine | The waste drawer is full | Pull out the waste drawer and empty it. Empty it after 250 punches. Page 14 |
| Labels peel off after cleaning | Solvents were used | Clean only with a dry or slightly moist cloth. Do not use solvents. Page 14 |
Frequently asked questions
How many sheets can the SPB 360 punch at once?
Up to 17 pages of 70/80 g/m² (20 # stock) paper, or up to 1.7 mm. The recommended amount is 15 to 17 pages. It also punches card stock up to 1.5 mm thick and 1 page of plastic foil at 0.3 mm. Do not punch metal or other materials. See page 3, page 10, page 16.
What coil sizes does it work with?
It inserts plastic and metal spirals up to 20 mm diameter. The built-in unit cuts and crimps plastic spirals only. See page 3, page 15.
Can I use metal spirals?
Yes, the electric drive inserts them, but the ends must be cut and bent with the SC pliers, a special accessory that works on both metal and plastic coils. Keep the mark on the top. See page 13, page 14.
Which paper sizes can I punch?
The paper guide adjusts for A4 and A5, and for 8.5" and 11" paper by pulling the matching pin. See page 7, page 9.
What are the size and power ratings?
The machine measures 36 cm x 49 cm x 25 cm and is rated 230/250V/50Hz/90W or 115/200V/60Hz/90W. See page 15.
What comes in the box?
The SPB 360, a punching lever, a power supply, a screw set and the operating manual. See page 5.
