

Page 1 of 13

Text on page 2
Upon unpacking their new OD 4000 punch, they should have the following items included:
Cord, Power 18 Ga
PDi Part # 007090
Assembly, Foot Pedal CE/UL
PDi Part # 007031
Oil, 3 in 1
PDi Part # 001085
PDi Part # 001086
PDi Part # 001172
PDi Part # 004050
This book is intended for Rhin-0-Tuff dealers.
2350 E. Braniff, Boise, Idaho 83716 / 800-390-5782 / PDI@rmci.net / www.RHIN-0-TUFF.com
Page 2 of 13

Text on page 3
4000 Final Assembly, Labels and Index
4000 Final Assembly, Machine
4000 Final Assembly, Index
Assembly, Motor OD 4000
Assembly, Motor OD 4000 and Index
Assembly, Back Panel 4000 and Index
Assembly, Bottom Panel 4000 and Index
4000 Schematic - UL
4000 Schematic - Pre UL
Page 3 of 13

Text on page 4
- 4000 Final Assembly, Labels -
PDi P/N 040270 001125 001155 001145 001146 001188 001136
Qty 1 ea 1 ea 1 ea 1 ea 1 ea 1 ea 1 ea
Description Decal, Rhin-0-Tuff OD4000 Decal, Rhin-0-Tuff Decal, Receptacle Decal, Fuse 5.OA 250V MDL Decal, Caution Fuse Decal, Caution Electrical Panel Decal, Serial Label 4000
Page 4 of 13

Page 5 of 13

Text on page 6
- 4000 Final Assembly, Machine -
Index
PDi PIN 002370 040090 040040 001157 001158 071930 001134 052510 007930 004050 002450 002440 040730 040140 040700 002350 040470 002480 007830 007960 001151 004050 001212 001203 004160 003190 005410 040770 040170 040310 040050 040030 001223 002060 005180 001159 040760 040490 040240 040100 040780 001050 040070 005200
Qty 1 ea 1 ea 1 ea 1 ea 1 ea 1 ea 1 ea 1 ea 3 ea 1 ea 8 ea 8 ea 1 ea 1 ea 1 ea 2 ea 1 ea 2 ea 1 ea 1 ea 1 ea 1 ea 2 ea 1 ea 3 ea 3 ea 1 ea 1 ea 1 ea 1 ea 1 ea 1 ea 1 ea 12 ea 1 ea 1 ea 1 ea 1 ea 1 ea 1 ea 1 ea 4 ea 1 ea 3 ea
Notes Description
FHMS, 4-40 X 3/8
Plate, Top Cover, Front Screw, Lock Safety Fastener Keeper, Safety Fastener Stop, Paper 7000/6500 Scribe Knob, Studded 1/4-20 X 1 Versaswitch Nut Adapter, Ring To 1/4” Spade Nut. 4-40 Nylock SHCS, Taptite 1/4-20 X 5/8 T30 - TORX 11 Per IFI SH STL Taptite 10-24 X 5/8 T27 - TORX Per IFI Sideplate, Left 4000CE/4800 Bushing, Delrin Pushbar Left Bracket, Stop Switch 4000
BHSHCS, 10-24 X 3/8
Bushing, Oillite 3/4id X 7/8od X 1/2 Wide
PPHMS, 4-40 X 5/8
Switch, One Cycle WP700/PMPXa Switch, Versaswitch I I Insulator, Switch Kit, Knob 4000 Knob, 1/4-20 X 1.1/2 Three Arm Decal, Ground Universal Nut, 10-32 Finish W asher, Star #10
PPHMS, 10-32 X 1
Page a Assy, Back Panel 4000 Plate, Bottom Guard, Chip Drawer Front, Top Front, Bottom Drawer, Vacuum Formed W/Holes PPHMS, 10-32 X 1/2 Type F Self Tapper
SHCS, 10-24 X 1/4
Receptacle, Safety Fastener Bracket, Stop Switch Blackened Page 6, 7 Assy, Motor OD 4000 Bushing, Pushbar Right Mount, Die Assy, Bottom Panel 4000 Foot, Rubber Screw Mount Side, Plate Right
SHCS, 114-20 X 5/8
Page 6 of 13

Page 7 of 13

Text on page 8
PDi P/N 040490
- Assembly, Motor OD 4000 -
Index
PDi P/N 008000 040110 001063 005090 005040 001095 048180 048160 048170 040530 040080 040460 040300 007111 007112
Qty 1 ea 2 ea 2 ea 2 ea 6 ea 2 ea 1 ea 1 ea 1 ea 2 ea 1 ea 1 ea 1 ea 2 ea 2 ea
Motor, Von Weise DC-Fasco Cam, Connecting Rod Pin, Dowel 5/16 X 1-1/4 Pin, Dowel 3/16 X 1
SHCS, 1/4-20 X 1
Pin, Roll 3/16 X 1 Pushbar, Top Slide In Die Bar, Pin Backup 4000/4800 Pushbar, Bottom 4800 Slide In Die (Sub) Assy, Connecting Rod 4000 Rod, Connecting Bushing, Oillite 1.500id X 1.750od Bushing, Oillite .314id X .500od Connector, Pin 14-20 Ga Molex (Motor) Connector, Pin 18-24 Ga Molex (Break)
Not Shown Not Shown
Page 8 of 13

Text on page 9
PDi P/N 040770
- Assembly, Back Panel 4000 -
PDi P/N 040710 007000 007029 007060 007040 007050 002060
Qty 1 ea 1 ea 1 ea 1 ea 1 ea 1 ea 4 ea
Description Panel, Electrical UL 4000 Fuse, Holder Fuse, MDL 5 Switch, On-Off Receptacle, Cord Foot Pedal Receptacle, Cord Power PPHMS, 10-32 X 1/2 Type F Self Tapper
Page 9 of 13

Text on page 10
PDi P/N 040780
- Assembly, Bottom Panel 4000 -
PDi P/N 040970 040980 040190 040690
Qty 1 ea 1 ea 1 ea 1 ea
Description PCA, Control Board UL PCA, Control Board CE Assy, Wire Harness 4000 UL Panel, Bottom Wi PC Board Mts
Page 10 of 13

Text on page 11
- 4000 Accessories -
- Fast Accurate Operation
- Replaces Foot Pedal
- Improves Throughput
UL - PDi P/N 072180 non UL - PDi P/N 071670
Page 11 of 13

Page 12 of 13

Page 13 of 13 ยท End of manual
Quick start
- Use the index on page 3 to find the assembly you need: Final Assembly (Labels and Machine), Motor, Back Panel, Bottom Panel, and the UL and pre-UL schematics.
- Find the part in that assembly's list and note its PDi part number, quantity and description.
- Check what came with your machine against page 2: power cord (PDi 007090), foot pedal assembly CE/UL (PDi 007031) and 3 in 1 oil (PDi 001085).
- For electrical parts, check whether your machine is the UL or CE version. The control board, for example, is listed for both.
- Quote the PDi part number and description when ordering. This parts book is intended for Rhin-O-Tuff dealers.
Troubleshooting
| Problem | Likely cause | Fix (from the manual) |
|---|---|---|
| An item is missing after unpacking a new OD 4000 | Not all included items were found in the box | Check for the power cord, 18 Ga (PDi 007090), the foot pedal assembly CE/UL (PDi 007031) and the 3 in 1 oil (PDi 001085), and order any missing item by its part number. Page 2 |
| A replacement fuse is needed | Fuse or fuse holder needs replacing (rated 5.0A 250V MDL) | Order Fuse, MDL 5 (PDi 007029). The fuse holder is PDi 007000. Page 9 |
| The wrong control board was ordered | UL and CE machines use different control boards | Order PCA, Control Board UL (PDi 040970) or PCA, Control Board CE (PDi 040980) to match your machine. Page 10 |
| Wiring does not match the schematic | The machine is a pre-UL version | Use the 4000 Schematic - Pre UL instead of the UL schematic. Both are listed in the index. Page 3 |
| Punching with the foot pedal is too slow | Each cycle is started with the foot pedal | Fit the 4000 accessory that replaces the foot pedal for faster, more accurate operation: PDi 072180 (UL) or PDi 071670 (non UL). Page 11 |
| Machine decals are worn or missing | Labels damaged or removed | Order the label set, 4000 Final Assembly, Labels (PDi 040270), which includes the fuse, caution and serial label decals. Page 4 |
Frequently asked questions
What comes with a new OD 4000 punch?
A power cord, 18 Ga (PDi 007090), a foot pedal assembly CE/UL (PDi 007031) and 3 in 1 oil (PDi 001085). See page 2.
Which fuse does the OD 4000 use?
The fuse decal specifies 5.0A 250V MDL. In the back panel assembly the fuse is PDi 007029 (Fuse, MDL 5) and the fuse holder is PDi 007000. See page 4, page 9.
What are the control board part numbers?
PCA, Control Board UL is PDi 040970 and PCA, Control Board CE is PDi 040980. Both are part of the bottom panel assembly (PDi 040780). See page 10.
Is there an alternative to the foot pedal?
Yes. A 4000 accessory replaces the foot pedal for fast, accurate operation and improved throughput: PDi 072180 (UL) or PDi 071670 (non UL). See page 11.
What is the part number for the motor?
The motor (Von Weise DC-Fasco) is PDi 008000, part of the motor assembly PDi 040490. See page 8.
