Standard PJ100 Manual, page 1

Page 1 of 9

Standard PJ100 Manual, page 2
Text on page 2

PAPER JOGGER

PJ-100

Important Information

  • This manual is designed to help you to install, operate and maintain the PJ-100 paper jogger. Read, understand and keep this manual in a safe and convenient place.
  • Do not operate the PJ-100 until you read and understand the instructions in this manual.
  • Horizon International Inc. shall not be liable for incidental consequential damages resulting from : improper or inadequate maintenance by customer; unauthorized modification or misuse; or operation outside of the environmental specifications for the product.
  • Horizon International Inc. pursues a policy of continuing improvement in design and performance of the product. Therefore, the product design and specifications are subject to change without prior notice and without our legal obligation.
  • All rights are reserved. No part of this manual may be photocopied, reproduced or translated to another language without the prior written consent of Horizon International Inc.

030221/PJ100/03E/DV

Page 2 of 9

Standard PJ100 Manual, page 3
Text on page 3
  1. Specifications

115 V, 50 Hz / 60 Hz 5.7 A 230 V, 50 Hz / 60 Hz 2.8 A

50 Hz : 580 W, 60 Hz : 580 W

Max. Sheet Size :

297 x 420 mm (11” x 17”)

Min. Sheet Size :

128 x 182 mm (5” x 7.2”)

Pile Height :

40 kg (88 lb)

Machine Dimensions :

489 (W) x 458 (D) x 1,135 (H) mm (19.3” x 18.0” x 44.7”)

Other :

The machine design and specifications are subject to change without any notice.

  1. Machine Descriptions

Circuit Protector (10A) For blower

POWER

OFF DELAY

Circuit Protector (2A) For vibration motor

Page 3 of 9

Standard PJ100 Manual, page 4
Text on page 4
  1. Selection of the Operation Mode

Select the PJ-100 operation mode with the mode select switch.

[OFF] PJ-100 machine power is OFF.

[Continuous Operating Mode] While this mode is selected, jogger vibrates continues. If the air adjusting dial is turned ON, the air will come out with the vibration.

OFF

[Foot Pedal Operating Mode] When this mode is selected, jogger vibrates only when stepping on the foot switch. If the air adjusting dial is turned ON, the air will come out with the vibration.

Foot switch Operating Mode

  1. Air Adjusting Dial Set Up

The amount of the air can be adjusted by the air adjusting dial.

[OFF] Turn the dial counterclockwise until there is a clicking sound. Air blower turns OFF and air will not come out.

[With the air] Turn the dial clockwise to increase the amount of the air.

Page 4 of 9

Standard PJ100 Manual, page 5
Text on page 5
  1. Timer Set Up

NOTE

  • Timer can be set from 0 to 12 sec.

When [Foot Switch Operating Mode] is selected with the air on, the air comes out and jogger vibrates during stepping the foot switch. The air will stop when foot switch is released, but jogger will vibrate during predetermined seconds.

POWER

OFF DELAY

NOTE

  • Jogger vibrates during predetermined seconds. when [Continuous Operating Mode] is switched to [Foot Switch Operating Mode] during jogging.
  1. Tray Angle Adjustment

Adjust tray angle according to the sheet size and sheet thickness.

  1. Loosen both tray lock levers (Left and Right).
  • Support the bottom part of the tray with a hand when unlocking the lever, in case tray moves by the weight of itself.
  1. Pull up or push down the bottom part of the tray to adjust the angle of the tray.
  2. Fasten the tray lock levers.

Change the tray angle

Tray Lock Lever

Foot Switch

Page 5 of 9

Standard PJ100 Manual, page 6
Text on page 6

7. Operation Procedure

1. Refer to section 5 and 7 and set up PJ- 100 in appropriate condition.

2. [When selecting the foot switch mode]

  • 1. Set the sheets on the tray.
  • 2. Step foot switch to start jogging.

[When selecting the continuous operating mode]

  • 1.Select OFF operating mode with the mode select switch.
  • 2. Set the sheets on the tray.
  • 3. Select continuous operating mode with the mode select switch to start jogging.
  • 4.Select OFF with the mode selecting switch to stop jogging.

Page 6 of 9

Standard PJ100 Manual, page 7
Text on page 7
  1. Filter Cleaning

Clean the filter once every two weeks.

  1. Pull out the filter.

CAUTION

Do not operate PJ-100 with filter removed.

  1. Clean the filter using the vacuum cleaner.
  • If the filter is dirty, wash it using the neutral detergent. When washing the filter, dry it completely before attaching it back.

3. Attach the filter.

9. Consumable Parts

Air Blower Air Blower is consumable. The lifetime of air blower is about 1500 to 2000 hours (Lifetime will differ according to the usage condition) . Call your local dealer to change the air blower.

Page 7 of 9

Standard PJ100 Manual, page 8

Page 8 of 9

Standard PJ100 Manual, page 9
Text on page 9

510 Kuze Ooyabu-cho Minami-ku, Kyoto 601-8206, Japan Phone:+81-75-934-6700, Fax:+81-75-934-6708, URL http://www.horizon.co.jp/

Page 9 of 9 ยท End of manual

Quick start

  1. Read the manual: Do not operate the PJ-100 until you read and understand the instructions.
  2. Pick a mode: Use the mode select switch. Choose OFF, Continuous Operating Mode or Foot Pedal Operating Mode.
  3. Set the air: Turn the air adjusting dial clockwise to increase air. Turn it counterclockwise until it clicks to turn the air off.
  4. Set the timer: The timer can be set from 0 to 12 seconds. It sets how long the jogger vibrates after the foot switch is released.
  5. Set the tray angle: Loosen both tray lock levers while holding the tray bottom. Pull up or push down to set the angle, then fasten the levers.
  6. Jog in foot switch mode: Set the sheets on the tray. Step on the foot switch to start jogging.
  7. Jog in continuous mode: Select OFF, set the sheets, then select continuous mode. Select OFF to stop jogging.

Troubleshooting

ProblemLikely causeFix (from the manual)
No air comes outThe air adjusting dial is turned to OFF.Turn the air adjusting dial clockwise to increase the air. Page 4
Jogger keeps vibrating after the foot switch is releasedThe timer keeps the jogger vibrating for the preset seconds.Change the timer setting. It can be set from 0 to 12 seconds. Page 5
Tray drops when unlockingThe tray can move under its own weight.Support the bottom of the tray with a hand when you loosen the tray lock levers. Page 5
Air flow weakens or the filter is dirtyThe filter needs cleaning. It should be cleaned every two weeks.Pull out the filter and clean it with a vacuum cleaner. If dirty, wash with neutral detergent and dry it completely. Never run the PJ-100 without the filter. Page 7
Air blower wears outThe air blower is a consumable part with a life of about 1500 to 2000 hours.Call your local dealer to change the air blower. Page 7
Sheets do not jog wellThe sheets may be outside the size limits.Use sheets from 5 x 7.2 in up to 11 x 17 in. The maximum pile height is 40 kg (88 lb). Page 3

Frequently asked questions

What sheet sizes can the PJ-100 paper jogger handle?

The minimum sheet size is 128 x 182 mm (5" x 7.2"). The maximum is 297 x 420 mm (11" x 17"). See page 3.

What operating modes does the PJ-100 have?

It has OFF, Continuous Operating Mode and Foot Pedal Operating Mode. Choose one with the mode select switch. See page 4.

How often should I clean the PJ-100 filter?

Clean the filter once every two weeks. Do not operate the PJ-100 with the filter removed. See page 7.

How long can the timer be set?

The timer can be set from 0 to 12 seconds. See page 5.

How long does the air blower last?

The air blower is a consumable part. Its life is about 1500 to 2000 hours, depending on use. Call your local dealer to replace it. See page 7.