Stanley Bostitch Heavy Duty Flat Clinch Stapler - BOSB380HDBLK Manual, page 1

Page 1 of 4

Stanley Bostitch Heavy Duty Flat Clinch Stapler - BOSB380HDBLK Manual, page 2

Page 2 of 4

Stanley Bostitch Heavy Duty Flat Clinch Stapler - BOSB380HDBLK Manual, page 3

Page 3 of 4

Stanley Bostitch Heavy Duty Flat Clinch Stapler - BOSB380HDBLK Manual, page 4

Page 4 of 4 · End of manual

Quick start

  1. Open the magazine: Press the magazine release button on top of the stapler, just behind the handle.
  2. Load staples: Put staples into the magazine. Use only BOSTITCH SB38HD staples.
  3. Close the magazine: Close it until you hear a click.
  4. Set the paper guide: Press the release button on the right side of the guide, slide it forward or back, then press the lock button on the left side.
  5. Staple: Place the papers against the paper guide and press the handle all the way down. The stapler trims the staple to fit the stack and clinches it.
  6. Release the handle: Let go of the handle after the staple is set.

Troubleshooting

ProblemLikely causeFix (from the manual)
Staple jamThe handle was not pressed down fully.Leave the papers in place. Open the magazine, unload the staples, and close it. Staple again with the handle fully down. Page 2
Staple did not clinchThe handle may not have been fully depressed.Remove the papers and check the staple. If it is not clinched, staple the papers again and press the handle all the way down. Page 2
Stapler does not work well with the staples loadedWrong staple type.Use only BOSTITCH SB38HD staples. Page 2
Paper guide will not moveThe guide is locked.Press the release button on the right side of the guide, slide it, and lock it with the button on the left side. Page 2
Magazine will not stay closedIt has not been pushed shut far enough.Close the magazine until you hear a click. Page 2
Staple trimmings are piling up in the baseThe base catches the trimmed ends of staples.Over a waste basket, remove the trimming receptacle cover, empty it, and put the cover back. Do this with each new box of staples. Page 4

Frequently asked questions

What staples does the B380HD use?

Use only BOSTITCH SB38HD staples. See page 2.

How many sheets can it staple?

It staples 2 to 180 sheets of 20 lb. paper with one staple size. It trims the staple to suit the stack. See page 2.

How do I clear a staple jam?

Keep the papers in place, open the magazine, unload the staples and close it. Staple again with the handle fully down, then check that the staple clinched. See page 2.

How do I empty the staple trimmings?

Hold the stapler over a waste basket, take off the trimming receptacle cover, empty it, and replace the cover. Do this with each new box of staples. See page 4.

What staples can I order for it?

The manual lists SB38HD-1M in a 1000 count box and SB38HD-5M in a 5000 count box. See page 4.