Page 1 of 3
Text on page 2
- Hand Sealers (TISH-300, 305, 400, 405, 500, 505) Spare Parts DIAGRAM
MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920
Page 2 of 3
Text on page 3
- Hand Sealers (TISH-300, 305, 400, 405, 500, 505)
Spare Parts DIAGRAM
TEW TISH Hand (Last Updated: 05/05/15)
REPLACEMENT KITS
Includes (2) elements, (2) PTFE cover, and (1) Ft. Long Roll of PTFE cover
Handle Button, Pressure Arm Handle (A1) (12",16", 20") Screw Mounting Pivot (A6) (4", 8"), (12", 16", 20") Handle, Pressure Arm (A2) Screw for Handle (4", 8"), (12", 16", 20") Silicon Rubber Holder Spring (A3) (4", 8", 12", 16", 20") Silicon Rubber Holder, Pressure Plate (A4) Silicon Rubber, Pressure Pad (A5) Screw for Element (TISH-100,200 ) Washer (TISH-100,200) Heating Element Heating Element Cover (Larger than on KFHC sealers) Ground Screw (TISH-100,200) Element Pin Set includes 8, 9, 11 (TISH-100,200) PTFE Cover, Upper Barrier Tape (A12) PTFE Adhesive, Bottom Barrier Tape (A11) Fixed Seat of Handle, Hinge Bracket (A8) Screw/ Hexagon Nut (12", 16", 20") Spring Washer (TISH-100,200) Fixed Shaft Linear of Handle Time Adjusting Knob (A17) Time Indicating Plate, Name Plate (A18) Screw for Timer Cover of Timer Variable Resistor(A19)/Potentiometer, B1M Timer(B13), Complete Unit includes 18,19,21,22 T (4")(8"),(12",16",20"),(HC) Same for 2mm, 5mm, Timer 220V Relay on the PCB of Timer Connector (B2) Body (A9) PTFE Cover Plate (A10), per each Screw for PTFE Cover Plate Washer for Microswitch Bracket
29 Screw for Microswitch Bracket 30 Fixed Pole of Handle, Hinge Pin (A7) 31 Transformer 32 Transformer Pressboard 33 Washer for Transformer 34 Screw for Transformer SR- 35 Wire Connector (B4) 36 Microswitch Lever (B9) 37 Metal Washer HA-1 38 Bakelite Pipe, HA-2 (MS-TEW comes standard with bakelite pipe) KFH-49 39 Insulating Washer HA-3 40 Bow Spring, Mounting Spring HA-4 , MS-TEW, MS-TEW5 TISH-EPS 40a Heater Terminal Assembly HTA includes parts 37-45 HTA-TEW 40b Bow Spring, Mounting Spring w/ insulator, MSI-TEW, MSI-TEW5 41 Brass Contact, PR-08, HA-5 42 Convex Bakelite, HA-6 45 Screw, HA-9 46 Rubber Foot(B15) (4"), (8"), (12", 16") TISH-17 47 Screw for Rubber Foot TISH-18 48 Bushing, Cable Restraint (B13) 49 Power Cord (B14), 50 Microswitch Lever Spring (B8) (12", 16") 51 Screw for Microswitch TISH-22 52 Microswitch (B5) T- 52-1 Microswitch Spring Plate (part not shown) 53 Microswitch Insulating Plate T- 54 Microswitch Bracket (B6) TISH-23b 55 Microswitch Fixed Plate (TISH-100,200) TISH-24 56 Bottom Plate, Cover Plate (B12) 57 Setting Screw for Fixed Pole
TISH-29
TRNS-
TISH-34 TISH-35
HA-1 HA-2 HA-3 MS-TEW HTA-TEW MSI-TEW HA-5 HA-6 HA-9
TISH-48 PC-TEW
TISH-51 MSW-TEW
TISH-53 TISH-54
TISH-57
TISH-27 TISH-28
MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920
Page 3 of 3 · End of manual
Quick start
- Confirm the model: this diagram covers the hand sealers TISH-300, 305, 400, 405, 500 and 505.
- Find the part: parts are labeled with keys such as A1 for the Handle and A4 for the Silicon Rubber Holder.
- Check the size: many parts are listed by sealer size, such as 12 inch, 16 inch and 20 inch.
- Consider a kit: the replacement kit includes 2 elements, 2 PTFE covers and a 1 foot roll of PTFE cover.
- Get help: contact MyBinding.com toll free at 1-800-944-4573.
Troubleshooting
| Problem | Likely cause | Fix (from the manual) |
|---|---|---|
| Need heating element and cover replacements | Parts listed as a kit | Order the replacement kit with 2 elements, 2 PTFE covers and a 1 foot roll of PTFE cover. Page 3 |
| Do not know which barrier tape to order | Upper and lower tapes are separate | Use PTFE Cover, Upper Barrier Tape (A12) for the top and PTFE Adhesive, Bottom Barrier Tape (A11) for the bottom. Page 3 |
| Pressure pad needs replacing | Pad and holder are separate parts | Order Silicon Rubber, Pressure Pad (A5) and Silicon Rubber Holder, Pressure Plate (A4). Page 3 |
| Timer parts needed | Timer has several parts | Use Time Adjusting Knob (A17), Variable Resistor (A19) or the complete Timer (B13). Page 3 |
| Handle does not match the sealer size | Handle sizes differ | Choose Handle (A1) for 12 inch, 16 inch or 20 inch sealers. Page 3 |
| Wrong heating element cover | Cover size differs from other sealers | The Heating Element Cover is larger than on KFHC sealers, so order from this list. Page 3 |
Frequently asked questions
What comes in a TISH replacement kit?
Replacement kits include (2) elements, (2) PTFE covers and a 1 ft. long roll of PTFE cover (page 3).
What is the part number for the heater terminal assembly?
The Heater Terminal Assembly is HTA-TEW and includes parts 37-45 (metal washer, bakelite pipe, insulating washer, mounting spring, brass contact, convex bakelite and screw) (page 3).
What is the part number for the element mounting spring?
The bow spring / mounting spring is MS-TEW or MS-TEW5, and the version with insulator is MSI-TEW or MSI-TEW5 (page 3).
Is the timer sold as a complete unit?
Yes. The complete timer unit includes the time adjusting knob, time indicating plate, timer cover and variable resistor (parts 18, 19, 21 and 22) (page 3).
