Xyron 510 Creative Station Laminator Users Manual, page 1

Page 1 of 3

Xyron 510 Creative Station Laminator Users Manual, page 2
Text on page 2

Warranty Information

Xyron, Inc. warrants that the Xyron ® 5” Creative Station ™ is free from defects in material and workmanship for a period of one (1) year from the date of purchase. Xyron, Inc. will repair or replace a defective product or part without charge, provided it is returned to the address below, freight prepaid with proof of purchase. If the product is damaged by neglect or misuse, the warranty is null and void.

To register your product online, please go to www.xyron.com and click on the product registration tab. If you register online, we will send you a free inspirational DVD full of great ideas!

Customer Service

We want you to be happy with your purchase of a Xyron product. If for any reason you have a problem or a question, we would like to hear from you before you consider returning it to the store where you bought it. In many cases, we will be able to solve your problem or answer your question right over the phone; so please contact Xyron Customer Service toll-free at 1-800-793-3523 or 1-480-443-9419 for help. You can also e-mail us at: customerservice@xyron.com

5” Creative Station ™

User Guide

The Xyron 5” Creative Station is a Sticker Maker, Laminator, Label and Magnet Maker all in one. Perfect for so many of your craft, school, home and office projects, it’s even safe enough for kids to use, requiring no heat, batteries or electricity. The 5” width allows you to create photo stickers, photo magnets, laminated recipe cards, business cards, labels for jars and cabinets and many other projects.

Refill Cartridges Available*

Perfect for:

For customer service outside of the U.S. Australia: 61 2 8899 8500; australiacustomers@esselte.com New Zealand: 64 9 272 1600; nzcustomers@esselte.com

Permanent Adhesive

Strongest hold For difficult surfaces

Repositionable Adhesive

The purchase or acquisition of this product does not confer the right or license to use the machine and cartridges in the retroreflective field or to make or sell machines or cartridges for use in the retroreflective field. May contain one or more of the following U.S. patents 5580417, 5735998, 5961779, 6244322, 6270612, 6660120, 7087280. Other U.S. and foreign patents pending.

Two-Sided Laminate

©2007 Xyron, Inc. 7400 East Tierra Buena Lane Scottsdale, AZ 85260 USA

Matte Laminate

Visit www.xyron.com for more information and great project ideas

Reposition multiple times Best on smooth surfaces Stick it. Unstick it. Restick it. Safe for windows, painted walls and doors, and it does not leave a residue on most surfaces. Test in an inconspicuous area first.

Photos, paper crafts, scrapbooking and card making, school and home projects, home décor, vellum, rubber stamping, and fabric, ribbon, metal and other 3-dimensional items

Perfect for:

Kid’s stickers, paper crafts, scrapbooking and card making, school and home projects, stenciling, vellum, games and photos

Perfect for:

Preserve and protect documents Allows you to cut right to the edge or completely through the item you are protecting. It will not separate!

Photos, ID’s, recipe cards, kid’s artwork, memorobilia, newspaper clippings, bookmarks, business cards and tags

Matte Laminate/ Permanent Adhesive

Perfect for:

Permanent Adhesive

Preserve and protect documents with a Matte Laminate finish on the top and Permanent Adhesive on the bottom

Laminate/Magnet

Create magnets with a Laminate finish

  • Refill Cartridges sold separately

Photos, paper crafts, scrapbooking, card making, memorabilia, classroom aids, food jar and packaging labels, displays, signs, banners and labels

Perfect for:

Photos, business cards, frames, school and home projects, shopping and To-Do lists

Page 2 of 3

Xyron 510 Creative Station Laminator Users Manual, page 3
Text on page 3

Features & Functions

Latch: Opens up machine

Cut Bar: Holds in place the material to be cut.

Cut Blade: Slides to the left and right to cut output material after it exits machine.

Unloading

Cartridge: Various types available.

  1. Open cartridge compartment

by lifting up on latch.

Feed Tray: Used to feed items into machine

Handle: Advances items through machine when turned clockwise.

Output tray: Where item exits machine.

2. Gently pull cartridge up

3. You can unload/load the

2. Make sure that film is

3. Close the lid by pressing

and out of machine.

cartridge even though it may not be completely used.

Loading

Basic Operation as easy as 1-2-3!

Step One

  1. Guide cartridge into machine

using tracks on machine sides.

Place item on feed tray.

placed underneath the clear cut bar.

down on latch until it clicks into position. Advance material slightly to assure perfect results.

Helpful Hints

Step Two

Guide item forward while slowly turning knob clockwise until your item comes out of the back of the machine.

Step Three

Press down on cut blade and slide to the left or right to cut. Note: For a smooth cut, place your finger all the way back to the back of the cut blade holder. Remember to burnish or rub well on adhesive items before removing film.

  • For best results, turn the handle slowly.
  • Burnish or rub around your adhesive items well before removing the top film.
  • Arrange small items (without overlapping them) on the feed tray to maximize your cartridge material use.
  • Use items that are .10” thickness or less.
  • If there is excess adhesive around edges of an item, simply wipe off with your fingers.
  • Fabric Tips:
  • Works well with most fabrics that do not have sizing
  • For items that will be washed, stitch after adhering
  • For best results, use Acid-Free Permanent Adhesive
  • If machine rollers pick up adhesive after use, clean with isopropanol alcohol.
  • Store your machine and cartridge between 40ºF and 70ºF.
  • To prevent curling on adhesive, remove the clear top mask first. Then lay your your document upside down to remove the backing from the sticky side.
  • To maximize the material when making a magnet frame, place a smaller item in the middle of the frame.

Page 3 of 3 · End of manual

Quick start

  1. Lift the latch to open the cartridge compartment.
  2. Guide the cartridge in using the tracks on the machine sides, with the film placed under the clear cut bar.
  3. Press the latch down until it clicks, then advance the material slightly.
  4. Place your item on the feed tray. Keep items .10" thick or less.
  5. Guide the item forward while slowly turning the handle clockwise until it comes out the back.
  6. Press down on the cut blade and slide it left or right to cut. Burnish adhesive items well before removing the film.

Troubleshooting

ProblemLikely causeFix (from the manual)
Excess adhesive around the edges of an itemWipe it off with your fingers. Page 3
Rollers pick up adhesiveClean the rollers with isopropanol alcohol. Page 3
Adhesive item curls when removing backingRemove the clear top mask first, then lay the item upside down to remove the backing from the sticky side. Page 3

Frequently asked questions

What can the Xyron 5" Creative Station make?

It makes stickers, laminated items, labels and magnets up to 5" wide, such as photo stickers, photo magnets, recipe cards and business cards. See page 2.

How thick can items be?

Use items that are .10" thick or less. See page 3.

Does the Creative Station need heat or electricity?

No. It needs no heat, batteries or electricity, and it is safe enough for kids to use. See page 2.

Can I remove a cartridge before it is used up?

Yes. Lift the latch and gently pull the cartridge up and out; it can be unloaded and loaded even if not completely used. See page 3.

What is the warranty?

Xyron warrants the 5" Creative Station against defects in material and workmanship for one year from the date of purchase. See page 2.