Xyron Design Runner Disc Maker Manual, page 1

Page 1 of 7

Xyron Design Runner Disc Maker Manual, page 2
Text on page 2

Combine the Xyron ® Design Disc ™ Maker with the Xyron ® Design Runner ™ Accessory Kit for even more customized printing options!

Italics

Arcs & Circles

Straight Lines

  • The Italic Base allows for effortless italic printing of decorative text on ribbons, invitations, cards or home , decor projects
  • Connect the Italic Base to the Arc Handle to create circles and arcs in a variety of sizes
  • Use the Straight Edge Guide to produce perfectly straight lines on a variety of papers and fabrics or for easy printing on small items, ribbon and other difficult to print on items

choose print create

FPO

Design Disc Maker

Find great project ideas at www.xyron.com

User

Guide

Page 2 of 7

Xyron Design Runner Disc Maker Manual, page 3
Text on page 3

User

Guide

Keyboard Composing Messages Printing Erasing Mixing Design Disc Artwork General Information

Create personalized Design Discs with the Xyron ® Design Disc ™ Maker

Page 3 of 7

Xyron Design Runner Disc Maker Manual, page 4
Text on page 4

The Xyron ® Design Disc ™ Maker

Blank Disc Slot Insert Blank Disc here (label side up).

LED Lights Lights show what size has been selected.

Save Button After typing the entry, press this button to save the entry to the Blank Disc.

Sizing Button Press this button to choose from 4 different print sizes; you can print up to four lines of text at 25%.

Keypad Use these keys to type words or phrases.

Delete Button Press this button to delete the last character typed. Press the Delete and Shift buttons at the same time and hold for 3 seconds to erase the last saved message on a Blank Disc. Press the Delete, Purple and Green buttons at the same time and hold for 3 seconds to delete all saved messages on a Blank Disc.

Shift Key Press and hold this button and a letter to type CAPITAL letters.

Purple Button Press and hold this button and a punctuation mark to type puncuation.

Green Button Press and hold this button and a European/non-English character to type European/non-English characters.

Design and Font Disc Slot Insert your Xyron Design or Font Disc here (label side up). If you do not insert a Disc, the machine will default to the Built-in Font.

LCD Screen Characters will appear on this screen as they are typed in. The screen shows two lines at a time. The maximum number of characters per message varies by size. Up to: 40 characters at 100%, 80 characters at 50%, 120 characters at 33%, 160 characters at 25%.

Enter Use this button to move to the next line after typing a word or phrase. Pressing the enter button will automatically reduce the size of the text.

Left and Right Arrows Use these buttons to move the cursor left or right in the text on the LCD screen. Press and hold the Shift button and the Left or Right Arrow buttons to scroll between previously saved messages.

Up and Down Arrows Use these buttons to maneuver between lines of text on the LCD screen.

Page 4 of 7

Xyron Design Runner Disc Maker Manual, page 5
Text on page 5

Composing Messages

Printing (con’t)

  • Insert a Font Disc (if a different Font is desired) as shown. (fig.1)
  • Keep the green button pressed and move the Xyron® Design Runner™ to the right until printing is complete.
  • Type in words or phrases.
  • Select a size. (fig.2)
  • Insert a Blank Disc. (fig.3)

Erasing

  • Press the save button. (fig.4)
  • Insert a Blank Disc into the Blank Disc Slot. Scroll through the content on the disc by simultaneously pressing and holding the Shift button and Left or Right Arrow buttons to make sure you want to delete the content on the disc.

Printing

  • After saving text to a Blank Disc, remove the Blank Disc from the Xyron ® Design Disc ™ Maker and insert it into the Xyron ® Design Runner ™. (fig.5)
  • Scroll to the image you want to print the images are numbered in the order that you saved them.
  • To erase the last saved message on a Blank Disc, press the Shift button and the Delete button at the same time and hold for 3 seconds (fig.7)
  • Place the white ‘+’ on the right side of the Design Runner on the project where you want to begin printing. (fig.6)

TO DELETE LAST

MSG, KEEP PRESSED

  • To erase all content on a disc, press the (fig.7) Purple, Green and Delete buttons at the same time and hold for 3 seconds. (fig.8)

TO DELETE DISC

KEEP PRESSED

  • Press and hold the green button.
  • Wait for the ‘P’ to appear on the bottom left of the LCD screen.

Page 5 of 7

Xyron Design Runner Disc Maker Manual, page 6
Text on page 6

General Information

  • Place a Xyron ® Design Disc ™ into the bottom of the Xyron ® Design Disc ™ Maker. (fig.1)
  • The Xyron ® Design Disc ™ Maker will turn off after 5 minutes without use. Any typed text that has not been saved will be lost.

(fig.1)

  • Each letter on the keypad corresponds to a numbered design. Look at the insert that comes with the Design Disc and use the chart below to select the desired designs.
  • You cannot save to or erase Design or Font discs.
  • The Xyron Design Disc Maker uses one 9V battery (included).
  • Use the Xyron® Design Runner ™ Accessory Kit with the Xyron ® Design Runner ™ to print perfectly straight lines, italics and symmetrical arcs.
  • For portability and convenience, store the Xyron ® Design Disc ™ Maker with the Xyron ® Design Runner ™ in the Xyron ® Design Runner ™ Carry Bag.
  • The Xyron ® Design Disc ™ Maker uses only Xyron ® Design, Font and Blank Discs.
  • When a Blank Disc is inserted into the Blank Disc Slot, the available memory will appear on the LCD screen as a fraction. For example, 50/215 means that there is space for up to 50 uppercase, full sized letters on the disc for a total of 215 spaces.
  • Only the letters corresponding to your selected designs, not the designs themselves, will show on the LCD screen.
  • Select the desired size.
  • Press the save button.
  • If you plan to print your custom phrases with the Xyron Design Runner using Continuous Mode, program a space at the end of the phrase or design to ensure proper spacing.

(Design Disc insert example)

Page 6 of 7

Xyron Design Runner Disc Maker Manual, page 7
Text on page 7

Important notes

  • You can create and print custom phrases up to 11” long.

Other Font Discs

available from Xyron

Bubble Font

  • If a phrase is too long, an error message will appear on the screen when the save button is pressed. You will need to modify the phrase in order to save it to a Blank Disc.
  • The maximum amount of characters per message varies by size. Up to 40 characters at 100%, 80 characters at 50%, 120 characters at 33%, 160 characters at 25%.

Chalkboard Font

Print up to four lines!

Distressed Font

Choose from four sizes:

Engraved Font

Page 7 of 7 ยท End of manual

Quick start

  1. Insert a Font Disc (label side up) if you want a different font; without one the machine uses the built-in font.
  2. Type your words or phrases on the keypad. Use Enter to move to the next line.
  3. Press the Sizing button to choose one of 4 print sizes.
  4. Insert a Blank Disc (label side up) and press the Save button.
  5. Move the Blank Disc to the Xyron Design Runner and scroll to the message; messages are numbered in the order saved.
  6. Place the white '+' on the right side of the Design Runner where printing should start, press and hold the green button until 'P' appears, then move the Design Runner to the right.

Troubleshooting

ProblemLikely causeFix (from the manual)
Error message when pressing SaveThe phrase is too long.Shorten the phrase so it fits. Phrases can be up to 11" long, and character limits depend on size. Page 7
Typed text was lostThe Disc Maker turns off after 5 minutes without use, and unsaved text is lost.Press Save before leaving the machine idle. Page 6
Cannot save to or erase a discDesign and Font Discs cannot be saved to or erased.Save and erase only on Xyron Blank Discs. Page 6

Frequently asked questions

How many characters can I save per message?

Up to 40 characters at 100%, 80 at 50%, 120 at 33% and 160 at 25%. You can print up to four lines of text at 25%. See page 4.

How do I erase a Blank Disc?

To erase the last saved message, hold Shift and Delete together for 3 seconds. To erase everything on the disc, hold Purple, Green and Delete together for 3 seconds. See page 5.

What battery does the Design Disc Maker use?

One 9V battery, which is included. See page 6.

How long can a custom phrase be?

You can create and print custom phrases up to 11" long. See page 7.

How do I check how much space is left on a Blank Disc?

Insert it in the Blank Disc Slot and the available memory shows as a fraction. For example, 50/215 means room for up to 50 uppercase, full-size letters out of 215 spaces. See page 6.