Akiles CardMac Power Pack
100 NewCondition OutOfStock

Sorry, but Akiles CardMac Power Pack is no longer available to buy.

We think you might like one of these instead:

Akiles CardMac Power Pack

Part #: ACM-PP
Brand: Akiles
  • Compatible With: Akiles CardMac Manual Business Card Slitter Bleed and No-Bleed Models
  • Production Speed: 60 Cards/Minute
  • Weight: 0.5 lbs
  • Warranty: 90 Day Manufacturer Warranty
X
Out of Stock
Qualifies for FREE Shipping!*
SWIPE FOR MORE IMAGES
  • 0
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
video

Product Description

Convert your Akiles CardMac Manual Business Card Slitter to an electric model within seconds with the Akiles CardMac Power Pack. This easy to attach upgrade will increase your business card output to 60 cards per minute. Suitable for either a Manual CardMac with or without Bleed, it will give you safe operation and effortless slitting. Featuring quick and easy one-step installation and included power cord.

Product Details

  • Compatible With: Akiles CardMac Manual Business Card Slitter Bleed and No-Bleed Models
  • Production Speed: 60 Cards/Minute
  • Weight: 0.5 lbs
  • Part Number: ACM-PP
  • Warranty: 90 Day Manufacturer Warranty

Product Reviews

Write Your Own Review
You're reviewing:Akiles CardMac Power Pack
Your Rating

Demonstration Video

Transcript: Welcome to MyBinding video. This is the Akiles CardMac Power Pack. If you have the Akiles CardMac Business Card Slitter and you don’t want to manually turn the handle anymore, this product is what you’re looking for. In the box is the motor and the power adaptor. To use, slide the power pack under the right side of the machine so the two knobs fit together. They may not initially connect. If so, turn the wheel a small amount and try again. It should snap into place and I will admit that in this demo the piece never completely snapped into place but it’s still worked. Then plug in the adaptor a ... Read More
Welcome to MyBinding video. This is the Akiles CardMac Power Pack. If you have the Akiles CardMac Business Card Slitter and you don’t want to manually turn the handle anymore, this product is what you’re looking for. In the box is the motor and the power adaptor. To use, slide the power pack under the right side of the machine so the two knobs fit together. They may not initially connect. If so, turn the wheel a small amount and try again. It should snap into place and I will admit that in this demo the piece never completely snapped into place but it’s still worked. Then plug in the adaptor and plug that into the wall circuit. It only works while you’re holding the power button. With your sheets in place push the power button and watch your sheets go through. Insert your newly cut strips into the second position and finish off your cards. There is a safety latch that should secure the power pack to the machine. Pushing the tab releases the latch, allowing you to slide the piece out if need be. For more demos, reviews and how-to’s, go to MyBinding.com.

Questions & Answers

Submit a New Question