Challenge MS-10 Multi-Spindle Paper Drill
17995.00
NewCondition
OutOfStock
We're sorry, but we no longer offer this item.
Call us at 1-800-944-4573 for personalized recommendations
or check out these similar items that may be a good fit:
-
Spinnit FMMH-3 Hydraulic Three Spindle Paper Drill
$8,674.59
- 2" drilling capacity
- Powerful hydraulic lift with foot pedal activation
- Easy to adjust moveable head design
- Adjustable hydraulic lift speed
-
Spinnit FMM-3 Manual Lift Three Spindle Paper Drill
$6,221.39
- The lowest priced 3 spindle drill on the market
- 2" drilling capacity
- Easy to adjust moveable head design
- Rugged mechanical lift table which smoothly traverses in either direction
-
Spinnit FMM-2 Manual Lift Two Spindle Paper Drill
$5,653.59
- Two hole drilling
- Ideal for hospitals, law and accounting offices
- 2" capacity two hole drilling
- Moveable heads and a traversing table allow for extreme versatility
-
Challenge EH-3 Hydraulic Three Spindle Paper Drill
$9,345.00
- Single stroke three hole drilling
- 25% more production through its 2-1/2" drilling capacity per stroke
- Powerful hydraulic operation
- Automatic return of the drilling heads
Challenge MS-10 Multi-Spindle Paper Drill
SWIPE FOR MORE IMAGES
- 0
- 1
Product Description
The Challenge MS-10 Multi-Spindle Paper Drill quickly drills any job up to 10 holes in one stroke, and is easily adjustable for a variety of multi-hole patterns. Its easily accessible control panel and powerful hydraulic operation are designed to reduce operator fatigue and increase job production. The MS-10 has a solid cast-iron construction, and is designed and built to stand up to years of heavy duty drilling use. With Challenge MS-10 Multi-Spindle Paper Drill, your drilling jobs will be done productively and on time.
This product is currently only available to our customers in Oregon, Washington, and Idaho.
Product Details
- High Production Multi-Hole Drilling.
- Drills Up To 10 Holes in One Stroke.
- Maximum Drill Bit Diameter 1/2".
- 2-1/2" Drilling Capacity.
- Powerful Hydraulic Operation.
- Easy Head Adjustment.
- Variable Speed Stroke Control.
- Automatic Paper Chip Removal.
- Rugged Cast Iron Construction.
- Flexible Side Guide Adjustments.
- Multi-Splined Drive Shaft.
- Backgauge Adjustments.
- Lighted Work Surface.
Item Specifications
- Maximum Number of Drill Heads: 10 Heads
- Drill Sizes Available (2" capacity): 1/8" to 1/2" / 3 to 13 mm
- Drill Sizes Available (2-1/2" capacity): 1/4" to 1/2" / 6 to 13 mm
- Center to Center Distance Maximum: 21" / 53 cm
- Center to Center Distance Minimum: 1-1/4" / 3.2 cm
- Minimum Distance Between Holes w/ Adj. Stops: 3/8" / 9.5 cm
- Minimum Distance Between Holes w/ Fixed Gauges: 1/4" / 6 mm
- Maximum Drilling Capacity: 2-1/2" / 6.35 cm
- Strokes per Minute (adjustable): 18 to 26
- Backgauge Adjustment: 0 to 9" / 0 to 23 cm
- Vertical Adjustment of Individual Heads: 1/4" / 6 mm
- Table Size: 24" x 36" / 61 x 91 cm
- Table Height: 38" / 96.5 cm
- Overall Height: 60" / 152 cm
- Floor Space Needed: 35" x 40" / 89 x 102 cm
- Electrical:
- Standard
- 3 Phase, 60 Hz, AC. Pump: 3/4 HP. Spindle Motor: 3 HP.
- 208 Volts, 14 Amps (service size 20 Amps)
- 230 Volts, 12.8 Amps (service size 20 Amps)
- 460 Volts, 6.6 Amps (service size 15 Amps)
- Optional
- 1 Phase, 60 Hz, AC. Pump: 3/4 HP. Spindle Motor: 3 HP
- 208 Volts, 26.5 Amps (service size 40 Amps)
- 230 Volts, 24.2 Amps (service size 40 Amps)
- Standard
- Warranty: 3 Years Manufacturer Warranty
Related Categories you might also like
Questions & Answers
▶
Asked by Wayne
The Challenge MS-10 Multi-Spindle Paper Drill does not come with an electrical plug -208/230 Volts/18 Amps, Single-Phase, 60 Hz, AC, (Service size 30 Amps). Pump: 1/2 H.P. Spindle: 1-1/2 H.P.
This machine must be wired to an individual line through a disconnect box with the proper voltage at the machine. Power cable must be purchased separately. Please give us a call at 800-944-4573, and an Inside sales associate can give you more info.
This machine must be wired to an individual line through a disconnect box with the proper voltage at the machine. Power cable must be purchased separately. Please give us a call at 800-944-4573, and an Inside sales associate can give you more info.
Answered by MyBinding
