The Challenge 200 hydraulic programmable paper cutter is one of the highest quality 20 inch fully automatic paper cutters available anywhere. This model includes uses a flip down safety shield. However, the Titan 200 is also available with a light beam safety mechanism. This wonderful piece of equipment offers a user friendly menu-driven LCD screen and fully programmable backgauge control with 99 channels of memory. It allows you to enter cutting dimensions in fraction, decimal or in metric measurements. It also has a precise light line cut position indicator, table slot closure device as well as hydraulic cutting and clamping for precise cutting every time. The titan 200 also includes a wide variety of safety features making it one of the safest programmable paper cutters available on the market.
Product Details
Key Benefits/Features:
User-friendly menu-driven LCD screen, fully programmable backgauge control with 99 channels, 9,801 total cut memory
Variable mode data entry (fraction, decimal, metric)
Automatic fraction to decimal calculation
Electronic Clamp Pressure Control - (programmable per cut with TC option)
Maintenance free red LED cut line light
Table slot closure device
Hydraulic cutting & clamping - motor runs only during cutting cycle
Rugged steel & cast iron construction
Lockable heavy duty casters for portability
Top of machine offers large 14.5" x 36"/36.8 cm x 91 cm) work surface
2-year Manufacturer's Warranty
Safety/Features:
UL/cUL listed and conforms to CE and ANSI B65.3 safety specifications
Two-hand push button control of cutting cycle with timed, non-repeat device
Cutting area protection - choice of light beam safety curtain or Plexiglas shield
Independent mechanical foot pedal clamping
Fully enclosed sheet metal rear table safety cover
Metal side tables (light beam only): 12.2”x8.2”/310x208mm
Overall Width: 39-5/8”/1006 mm
Overall Length: 50-7/8”/1293 mm
Overall Height: 53”/1350 mm
Will pass through door:
(assembled) 39-3/4”/1010 mm
(side tables, light beams, & power switch out) 36-1/4”/920 mm
(table/treadle/light beams out) 29”/737 mm
Net Weight (approx.): 800 lbs/363 kg
Shipping Weight (approx.): 980 lbs/444 kg
Electrical UL/CUL Listed & CE:
1 1/2 H.P., Single-Phase, AC, 60 Hz, 208/230 Volts, 12 Amps, Service size 15 Amps. Power cord included. Requires Receptacle Type: NEMA 6-15R or 6-20R.
Demonstration Video
Challenge Titan 200 Electric Paper Cutter Demo Video
Transcript :
Challenge Titan 200 Programmable Guillotines – The Challenge Machinery Company, www.challengemachinery.com. The Titan 200 line of guillotine cutters bridges the gap for many digital and in-plant locations. Solid steel and aluminum construction serves as the foundation for consistent, accurate cutting. Floating backgauge fingers and a bright red LED cut indicator. Swift backgauge positioning and table slot closure device. Monitored knife safety latch inhibits blade drifting. The Titan 200 is available with either category 4 light-beam safety curtains or tilt-shield safety cover. The backgauge p ...
Challenge Titan 200 Programmable Guillotines – The Challenge Machinery Company, www.challengemachinery.com. The Titan 200 line of guillotine cutters bridges the gap for many digital and in-plant locations. Solid steel and aluminum construction serves as the foundation for consistent, accurate cutting. Floating backgauge fingers and a bright red LED cut indicator. Swift backgauge positioning and table slot closure device. Monitored knife safety latch inhibits blade drifting. The Titan 200 is available with either category 4 light-beam safety curtains or tilt-shield safety cover. The backgauge programmer for the Titan 200 is extremely powerful yet intuitive for novice operators. Engineered to provide years of dependable service, the Titan 200 is suited for the demands of today’s digital or in-plant print providers. Speed, accuracy, and efficiency, the hydraulic cutter that gives you more. Over a century of providing assurance you made the right decision. Challenge Titan 200 Programmable Guillotines – The Challenge Machinery Company, www.challengemachinery.com.
How To Change the Blade On a Challenge Titan 200 Paper Cutter Demo Video
Transcript :
Notice: The videos in this collection are an enhancement to the service manual. Please refer to the manual for additional information, specifications and procedures.
We’re doing the blade change of the Titan 200. Your first step is to loosen your quarter 20 screws up above the blade. Just back those all the way out. Once those are out of your way, you loosen your first slotted screw and remove.
Your second slot and remove. This is where your knife handles will be inserted. That’s your first handle. Make sure they’re good and snug so your blade doesn’t slide. Keeps you safe. Once they’re ...
Notice: The videos in this collection are an enhancement to the service manual. Please refer to the manual for additional information, specifications and procedures.
We’re doing the blade change of the Titan 200. Your first step is to loosen your quarter 20 screws up above the blade. Just back those all the way out. Once those are out of your way, you loosen your first slotted screw and remove.
Your second slot and remove. This is where your knife handles will be inserted. That’s your first handle. Make sure they’re good and snug so your blade doesn’t slide. Keeps you safe. Once they’re tight, take out the rest of your blade screws. To get your blade out or remove it, loosen your handles while still holding pressure up and then bring your knife down. Pull your knife out.
Now, you got your blade out. You loosen the two bolts on your scabbard, your knife carrier, and pull the screws. Dump the blade out. Try not to touch it. These blades are extremely sharp. Load in the dull blade. Put your handles back in the new blade that you’re gonna put in the machine. Move it back. Insert the tie bolts back into the knife carrier. Make sure that your screws are tight for shipping purposes. Then install your new knife.
When installing your new blade, start low on the right hand side, lift your left end up. Be very careful not to chip the edge of your blade. Then slide it into the carrier. Make sure you’re all the way to the top. Tighten your handles. Make sure they’re not gonna slip. And then insert your blade screws. Remove the two handles. Insert the last two remaining screws. Keep them snug, not overly tight, just snug. You do not want your blade to slide in this position. Now that your blade’s in, you’re gonna want to flip your cut stick or put a new cut stick in. Here, I flipped it to a clean side. All ready to go.
Transcript :
Titan 200 Accuracy Adjustment
Notice: The videos in this collection are an enhancement to the service manual. Please refer to the manual for additional information, specifications and procedures.
When your actual cut sheet is longer or off from your display, an accuracy adjustment is needed. I use 11 x 17-inch piece of paper to cut over the whole area of a bad gauge. Set my machine to 2 inches. The machine will beep when it's there. Make your cut. Take out my strip. I get my measurement. Right now, my ruler says I'm at 1
Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
Press to skip carousel
