1-250 Avery Style Collated Number Tabs - Letter Size - Side Tab

Straight collation means the tab order is arranged to work with a specific production flow, so the numbered tabs appear in the correct sequence after insertion or copying. That matters when producing multiple binders, legal sets, or reference packets where one wrong tab order can throw off the whole document. Before ordering, confirm whether your workflow needs straight collated or reverse collated tabs. Also confirm the tab range, sheet size, and side-tab position. For example, 1–25, 26–50, and other ranges are not interchangeable if the binder needs one continuous sequence. If you need different tab styles, compare pre-printed index tabs before ordering.

Unpunched tabs give more flexibility because you can punch them for the binder system you use. That is helpful when different departments use different hole patterns or binding formats. The tradeoff is that you must punch them accurately and consistently. Before production, set up the punch for the binder rings or binding edge, then test a few tabs to confirm alignment. Side tabs need to remain visible after the sheet is punched and inserted. If the punch is too close to the tab edge or the sheets are flipped incorrectly, the finished binder can look uneven. For legal-style organization, buyers can also compare legal indexes to confirm the right tab format.

Order the full 1–250 range when the binder, case file, or reference set needs a long continuous sequence. Smaller ranges are better when the document has fewer sections or when only certain number blocks need replacement. For recurring binder builds, matching the range to the document structure helps reduce leftover tabs and missed sections. If your team often builds binders with different section counts, keeping common smaller ranges can be easier than opening a full 250-number sequence for every job. Also check whether the tab style, paper weight, tab color, and print style match older binders. Mixing tab formats can make updates look inconsistent and harder to read.

Check collation direction, sheet orientation, tab side, paper size, and whether the copier path can handle tab stock. Tabs can be damaged or misfed if the device is not set up for tabbed sheets. Also confirm whether the job needs one complete sequence per binder or multiple copies of each numbered tab. For production runs, make one full sample binder before copying or assembling the full batch. Check that number 1 starts in the right position and that the final number lands where expected. Store unused ranges flat and sorted, because curled or mixed tabs can slow down future binder builds. Careful setup prevents rework on large numbered sets.