Framing Tools Accessories

Replace or rotate blades when bevels become rough, corners hook, the board tears, or additional pressure is needed to complete the cut. Some poor cuts result from incorrect blade depth, loose material, or alignment rather than blade wear, so confirm the setup before discarding the blade. The available replacement blades for mat cutters are model-specific and should match the cutter head exactly. Use a fresh blade for critical work and dense board. Store replacements in protective packaging and dispose of used blades in a suitable sharps container.

Select points according to the point driver, frame material, package thickness, and whether the contents need future access. Flexible points can bend upward for removal, while rigid points provide firmer permanent retention. The point length and profile must be compatible with the tool. Suitable framing points should be chosen according to the exact driver and retention requirement. Test insertion on scrap moulding before working on a finished frame, especially when the wood is hard or narrow. The point should hold the backing securely without splitting the frame or placing uneven pressure on the glazing.

Production stops help maintain consistent borders and opening dimensions across multiple mats. Squaring arms, extension guides, and measuring stops can reduce repeated manual marking and improve alignment. Their compatibility depends on the exact cutter rail and base configuration. Before ordering, determine whether the accessory controls the outside mat size, opening size, cutting position, or repeated spacing. Set up one full sample and measure all four borders before processing the remaining quantity. Stops improve repeatability only when the cutter itself is square and the material is positioned against the same reference edges.

Frequently used work areas may benefit from spare blades, points, cutting slips, measuring stops, dust-removal supplies, and model-specific wear parts. Suitable replacement blades for mat cutters should match the exact cutter head and blade specification. Stock levels should reflect normal consumption and supplier lead times. Keep accessories labeled by compatible machines to prevent mixing similar parts. A small organized reserve helps avoid using worn blades, incorrect fasteners, or improvised components when a routine item runs out.