Lassco Wizer Paper Joggers

A flat-top jogger gives the operator more freedom to position bulky, glossy, bound, or irregular stacks by hand. It can be useful when the material does not sit naturally inside a fixed bin. An angled-bin design uses gravity and side guides to bring ordinary sheets toward consistent edges, which can make routine paper alignment more hands-off. The better style depends on sheet shape, stack height, surface friction, and whether the operator needs to rotate or guide the material during vibration. Flat surfaces may also suit newspapers, magazines, envelopes, or items that would not fit neatly in a narrow bin. Run a sample with the most difficult regular stock because lightweight sheets and heavy glossy products respond differently to the same vibration.

A multi-bin jogger can align several smaller stacks separately, which is useful for envelopes, forms, mail pieces, counted batches, or document sections that must not be mixed. Multi-bin joggers can reduce repeated loading when the workflow contains several short stacks rather than one large ream. Confirm each bin’s usable dimensions and capacity, since the combined machine capacity does not mean every bin will accept the largest sheet. Separate bins may also help preserve order after collation. Label each position when similar jobs are processed together. A single large bin or flat table may remain more practical for oversized sheets, thick stacks, or material that requires hand positioning.

Vibration can loosen sheets and help reduce minor static-related sticking, but a jogger is not a complete solution for severe static, moisture imbalance, or curled paper. Stock should be properly conditioned and stored before processing. Freshly printed sheets may need time to cool or cure, especially after heavy toner coverage. Fan the stack only when appropriate and make sure the edges are not damaged. If static repeatedly causes feeding problems, review humidity, paper storage, printer conditions, and any approved static-control methods. Curl may need to be corrected at the printer or through paper conditioning rather than forced flat on the jogger. The machine’s primary function is edge alignment, so good material preparation remains necessary for dependable results.

Place the jogger before any process that depends on square, even stacks, such as cutting, drilling, punching, folding, counting, or binding. It should be close enough to the next machine that aligned paper is not disturbed while being carried across the room. Carts and workstations may help support staging when several jobs move between printing and finishing equipment. The surface must hold the jogger’s weight and vibration without shifting. Leave room for loading, unloading, controls, and electrical access. Avoid placing loose supplies where vibration can cause them to fall. The operator should be able to transfer the stack while supporting all edges so the alignment achieved by the jogger is preserved.