Lassco Wizer Staplers

Electric operation can reduce fatigue and improve cycle consistency when the same fastening task is repeated throughout the day. It is useful for production work where operators would otherwise apply significant hand force or where staple placement needs to remain consistent. Manual staplers may be more practical for occasional jobs, frequent setting changes, or locations without convenient power. Consider cycle rate, foot-pedal operation, safety controls, noise, and how the document is positioned before choosing. Powered equipment can increase output only when loading and unloading keep pace with the stapling cycle. A simple manual unit may remain efficient for short runs, while regular booklet or thick-stack production often benefits from electric assistance.

A deep throat allows the staple to be placed farther from the paper edge, including directly along the centre fold of a booklet. Booklet staplers are useful for newsletters, programmes, brochures, manuals, and other folded documents. Confirm the maximum sheet dimensions and throat depth because a machine may handle letter-size booklets but not larger formats. The sheet capacity should be assessed after folding, since a booklet with ten sheets becomes a forty-page finished piece and includes twice the material thickness at the fold. Accurate side guides and stops help keep staple placement consistent. Run a folded sample before production to confirm that the staple passes through the spine and clinches securely without tearing the inner sheets.

Staple leg length should suit the compressed thickness of the document. A leg that is too short may not pass fully through the stack or clinch securely. A leg that is too long can fold awkwardly, leave sharp protrusions, or cause jams. Capacity charts are useful, but the actual result depends on paper weight, covers, coatings, and the stapler’s clinching system. Measure or test the thickest regular job rather than assuming every sheet is standard 20-pound paper. Some heavy-duty staplers support several leg lengths so one machine can handle a wider range of stacks. Keep each size clearly labelled and load only the staple specified for the model. Testing a few documents is especially important after changing staple size.

Staples must match the exact stapler, stapling head, strip design, crown, wire gauge, and leg length. Lassco Wizer staples include products for Rapid, Skrebba, booklet-making, and heavy-duty applications. Brand name alone is not enough because different Lassco Wizer machines use different staple families. Read the model plate and operating manual, then match the listed staple reference. Using an unsuitable staple can cause poor clinching, repeated jams, driver damage, or incomplete fastening. Keep the correct box next to each machine and avoid mixing loose strips. When several document thicknesses are produced, record which staple length works for each regular job so operators do not have to estimate during production.