MyBinding Laminating Pouch Carriers

Choose the carrier according to the outside dimensions of the pouch, not only the document inside it. The pouch should lie flat within the carrier without folding, bending, or extending beyond the edges. A carrier that is too small can crease the pouch or expose adhesive to the rollers. A carrier that is excessively large may be more difficult to guide straight through a narrow machine. Confirm both the carrier dimensions and the laminator’s maximum feed width. When several pouch sizes are used regularly, separate carriers can reduce trimming and handling. Some carrier materials may be cut for smaller custom jobs, but the trimmed edge should remain straight and clean so it feeds evenly.

A carrier is particularly useful for small cards, photographs, delicate papers, irregular inserts, cutouts, and pouches that may release adhesive near the edges. It supports the pouch during feeding and helps keep adhesive away from the rollers. The carrier cannot correct an incorrectly sized pouch, poor document alignment, or unsuitable heat settings, so those details still need to be confirmed. Select the pouch first, then choose a carrier that accommodates its full outer dimensions. The guide explaining laminating carriers provides additional information on their purpose and use.

Replace a carrier when it becomes warped, creased, scorched, heavily marked, or coated with adhesive. Damage can prevent the carrier from feeding straight and may create uneven heat or pressure across the pouch. Adhesive residue can also transfer to clean work or cause the pouch to stick inside the carrier. Inspect it before important presentation jobs and keep clean carriers separate from those used for rough production work. Store carriers flat in a dry location rather than folding or rolling them. If cloudy output or marks continue after the carrier has been replaced, review the machine temperature, roller cleanliness, pouch thickness, and warm-up time because the carrier may not be the underlying cause.

Order pouches that match the document dimensions, a carrier large enough for the complete pouch, and cleaning supplies suitable for the machine. Confirm that the pouch thickness is supported by the laminator and that the carrier does not make the total material too thick for the selected setting. Frequent users may need several carrier sizes rather than repeatedly cutting down one large carrier. Keeping replacement carriers available also prevents production delays when one becomes damaged or contaminated. The available laminating pouches by size can help align the insert, pouch, carrier, and machine width before supplies are ordered.