MyBinding Prepunched Copier Tabs

Choose 90 lb tabs for standard binder and manual projects where a durable tab is needed without adding too much bulk. Choose 110 lb tabs when the divider needs a heavier feel or will be handled often. Heavier tabs can feel more substantial, but they may require more careful printer feeding. Always confirm printer compatibility before running a full set, especially with tab stock. Copier tabs are generally meant for laser printers or copiers, not inkjet printers. Run a small alignment test before printing the full carton. If the project is uncertain, copier tab sample packs can help when active sample options are available.

Plain tabs are a simpler option for jobs that do not need extra reinforcement on the tab extension. Mylar-coated tabs add a protective coating to the tab area, which helps with frequent handling and makes section dividers easier to use over time. Coated tabs are often better for training manuals, reference binders, policy books, and customer-facing document sets. Plain tabs can work for internal packets, short-term documents, and lower-volume jobs. Also check the reinforced binding edge when the tabs will be turned often. For more divider styles, MyBinding index tabs can help compare tab formats beyond prepunched copier tabs.

Yes. Collation order matters because tab sets must feed and print in the correct sequence. Straight-collated and reverse-collated tabs are arranged differently, so the right choice depends on your printer, copier, template, and finishing workflow. If the order is wrong, the printed tab titles may appear in the wrong tab position or the assembled document may need manual resorting. Test with a small set before printing a large job. Confirm tab cut, bank count, print orientation, and whether the set is meant to be loaded face up or face down. A simple test can prevent wasted tab stock and rework.

They can be ready for binders only when the punch pattern, sheet size, tab cut, and collation match the binder or binding method. A 3-hole prepunched tab can go into a standard ring binder after printing and sorting if the hole spacing matches. Tabs punched for comb or other binding styles must match that system instead. Do not assume every prepunched tab fits every binder. Also check whether the tabs are plain or Mylar coated, and whether the binding edge is reinforced. If the tabs will be printed, run an alignment test before final assembly. Prepunched tabs save time only when the format matches the full workflow.