The Side Guide makes the registration of any material that is solid or where you can not print the registration marks that help the operator line up the cover and boards. With the side and back guides, you can pre position the spine and boards, and then use the guides to fix the position for that and additional covers!
Product Details
Easier positioning of opaque materials.
Ergonomic design.
Makes the registration of any material that is solid.
Help the operator line up the cover and boards.
Item Specifications
Product Type: Back/Side Guides
Compatible With: All Fastbind Casematics
Part Number: FBCSSIDE
Demonstration Video
Fastbind Side and Back Guide for Casematic
Transcript :
These are Side and Back Guides for the Fastbind Casematic.
To use, align you first hardcover project. When you are satisfied with the alignment, slide the longest guide along its corner to the side of your project. It is a very strong magnet, and will not be easily moved when in place.
Next, while holding your project in place, lift the clamp and slide the smaller magnet from behind and align it with the top of your page.
Now use the guides to align your future projects, increasing efficiency and speed, and also negating the need to print reference guides onto your covers.
The guid ...
These are Side and Back Guides for the Fastbind Casematic.
To use, align you first hardcover project. When you are satisfied with the alignment, slide the longest guide along its corner to the side of your project. It is a very strong magnet, and will not be easily moved when in place.
Next, while holding your project in place, lift the clamp and slide the smaller magnet from behind and align it with the top of your page.
Now use the guides to align your future projects, increasing efficiency and speed, and also negating the need to print reference guides onto your covers.
The guides use powerful magnets to stay in place, which are not easily moved, and will stay secured through the course of your hardcover creations.
