Single Spindle Paper Drills
Single spindle paper drills can cleanly drill a hole through a stack of paper. With a single bit, you can put a hole wherever you need.

-
Filepecker FP-1XLS Manual Paper Hole Drill and Accessories
- Simple and easy multi-hole punching process by sliding the table
- Punch up to an impressive 300 sheet of document at one time
- Very little pressure needed to operate
- Capable to handle up to 14" wide paper
-
Filepecker FP-1B Manual Paper Hole Drill and Accessories
- Simple and easy multi-hole punching process by sliding the table
- Punch up to an impressive 300 sheet of document at one time
- Very little pressure needed to operate
- Features a sliding table with adjustable stops providing an efficient work environment
-
FP-M15 Multi-Hole Punch
- Punch up to 9 holes at a time.
- Up to 170 sheets of 20 pound bond.
- With three punch heads set up with 5/16" (8 mm) punch bits.
- Size punch bits available are 3/16” (4 mm) and 1/4” (6 mm).
Part #: FP-M15 -
Spinnit EBM-S Single Spindle Bench Model Paper Drill
- The most economical 2" capacity table-top drill on the market
- Stationary table with an adjustable back-gauge slide guide system
- Product moves accross the table for easy multi-hole drilling
- Ideal for offices, schools and small print operations
Part #: EBM-S -
Spinnit EBM-2.1 Single Spindle Ez Glide Paper Drill
- E-Z Glide table system uses pattern bars which allows for quick movement from hole to hole for multi-hole drilling, operated with a release lever positioned on each side of the table to provide either right or left handed operation
- Adjustable side stops allow you to trap your product to prevent misalignment
- Easy to set up and use with minimal installation neccessary
- Includes four patterns for multi-hole drilling
Part #: EBM-2.1 -
Challenge Handy-Drill Single Spindle Paper Drill
- 2-1/2" lift capacity in 4 different drill bit sizes (1/4", 5/16", 3/8", 1/2"). Machine can be converted to a 2" maximum lift capacity for a wider range of available hole sizes (1/8" to 1/2").
- Safe to operate - Spindle motor automatically turns on when the pull-down lever is moved and automatically switches off when the lever returns to the up position.
- Conveniently located chip collector cups - Located around the spindle, they include a sight gauge to signify when the cups are full and need to be emptied. The cups also serve as safety covers with interlock switches.
- Adjustable backgauge stops - The backgauge includes 4 adjustable stops for drilling multiple hole pattern jobs. Just flip the switch and move your pile to the next setting.
Part #: CH-HANDYDRILL -
Challenge JF Single Spindle Paper Drill
- Convenient Foot Pedal Operation
- 2" Drilling Capacity: Drills up to 2" lifts of stock in a single stroke.
- 13 Hollow Drill Bit Sizes: Hole sizes range from 1/8" to 1/2" diameters.
- Auto - Trip Side Guide: For muliple hole patterns, the versatile backguage offers up to four adjustable stop locations (additonal adjustable stops sold separately).
Part #: CHJFPAPERDRILL -
Part #: FM-2