Foam Board Rabbet Cutter by FoamWerks - WC4010
12.99 NewCondition OutOfStock

We're sorry, but we no longer offer this item.

Call us at 1-800-944-4573 for personalized recommendations

or check out these similar items that may be a good fit:

Foam Board Rabbet Cutter by FoamWerks - WC4010

Part #: WC4010
Brand: Logan
1 Questions, 1 Answers
  • Innovative ergonomic construction and dual blade action create one-stroke finished results.
  • Features on-board blade storage and includes two blades.
  • Use as either a right-handed push style or left-handed pull style action.
  • Works with 3/16" (5mm) foam board.
We're here for you!
Please call 1-800-944-4573 for help finding a comparable solution, or
Click to Chat

SWIPE FOR MORE IMAGES
  • 0
  • 1
  • 2
video

Product Description

Create perfect adjoining foam board joints with FoamWerks Rabbet Cutter. The innovative ergonomic construction and dual blade action create one-stroke finished results. WC-4010 also features on-board blade storage and includes two blades. Use as either a right-handed push style or left-handed pull style action. The Rabbet Cutter works with 3/16" (5mm) foam board. Use replacement blades WC-5 or WC-20.

Product Details

  • Innovative ergonomic construction and dual blade action create one-stroke finished results.
  • Features on-board blade storage and includes two blades.
  • Use as either a right-handed push style or left-handed pull style action.
  • Works with 3/16" (5mm) foam board.
  • Use replacement blades WC-5 or WC-20.
  • 90 Days Manufacturer's Warranty

Demonstration Video

FoamWerks WC-4010 Rabbet Cutter Demo

Transcript: To install blades into the Logan Rabbet Cutter, first remove the knob and then separate the two halves of the tool. Install each blade onto the embedded magnet and replace both halves of the tool together. Note extra blade storage on the back of the tool. To produce a rabbet cut edge, use the tool at the edge of the foam board and push it away from you. Another technique is to switch it to the other hand, connect the tool to the edge of the foam board, and pull it towards you. A rabbet edge is another way of creating a 90-degree corner with foam board.
To install blades into the Logan Rabbet Cutter, first remove the knob and then separate the two halves of the tool. Install each blade onto the embedded magnet and replace both halves of the tool together. Note extra blade storage on the back of the tool. To produce a rabbet cut edge, use the tool at the edge of the foam board and push it away from you. Another technique is to switch it to the other hand, connect the tool to the edge of the foam board, and pull it towards you. A rabbet edge is another way of creating a 90-degree corner with foam board.

Questions & Answers

Thank you for your question. Using the Foam Board Rabbet Cutter by FoamWerks with a fresh, sharp it should be able to cut through both mediums with out tearing the photo paper.

Answered by MyBinding
6 years and 7 months ago ago

Submit a New Question