This Graphic Wizard GW 8000P Number/Perf/Score/Slit Machine has a heavy duty construction that is perfect for everyday operation. It has a 100-job memory that provides a fast job change over, and microprocessor controls that give the operator the ability to position up to 100 numbers per head, anywhere on each sheet. The 8000P has pneumatically propelled numbering heads provides for “extra-long” numbering run length, as well as the ability to add the optional strike perf attachment. Feature for feature, spec for spec, it is the best value in the industry. If productivity warrants it, the 8000P can be easily upgraded to GW12000 at any time!
Product Details
8,000 standard-size sheets per hour.
Upgradable to GW12000 at any time!
Automatic feed.
Simple setup.
Easy to operate.
Feed sets unglued or glued side.
Microprocessor controlled with forward AND backward stepping makes for easy programming.
Up to 4 heads.
Heads rotate & lock throughout 360 degrees.
Up to 100 numbers per head per sheet!
100 job memory to store numbering jobs.
Accurate 0.010" register.
Crash number up to 10-part sets.
Ability to control depth of each perf/score/slit independently.
Create snap sets while numbering.
Perforating options: 2,4,6,8,12/inch & MICROPERF.
Wide (standard) or narrow score blades.
Optional slitting blade.
Optional conveyor outfeed.
Optional strike perf attachment.
5 year limited Manufacturer's Warranty.
Item Specifications
Electrical: 120V/230V, 60/50Hz, 5.0 Amp
Stand: Included
Speed: Up to 8000 sheets per hour.
Number of Job Memories: 100
Maximum number of numbering positions: Up to 100, anywhere on the sheet!
Maximum number of heads: 4
Numbering Heads: 6-digit reverse standard; optional 8-digit condensed available
Head Rotation: Lockable throughout 360 degrees
Repeat Action: Consecutive, 1x, 2x, 3x, 4x
Inking System: Ink pad with reservoir
Perforating Blade Options: 2,4,6,8,12,16 teeth per inch (TPI), 42,50 and 72 Microperf TPI
Scoring Blade Options: Wide (standard) or narrow
MICROPERF Blade Options: 42 or 72 teeth per inch
Slitting Blade: Optional
Minimum Stock Size: 3"W x 5"L (7.6cm x 12.7cm)
Maximum Stock Size: 18" x 18" (45 cm x 45 cm)
Stock Weight: 12# – 12 point (up to 10-part carbonless)
Impression Control: Infinitely variable; crash up to 10-part carbonless.
Length: 44" (1.12m)
SHIPPING DIMENSIONS (L X W X H): 31" X 28" X 55"
SHIPPING WEIGHT: 200 LBS.
Drive Unit Type: Pneumatic (compressed air required)
Hello, thank you for your inquiry. The GW8000P does not come with an air compressor.
In general, the in-house air used for other machines works perfectly for the GW8000P. However, if you do not have access to house air, you can also use the California Air Tools 8010 Steel Tank Air Compressor. This will work the same as in-house air and be as equally quiet. You can also purchase a larger tank to have the compressor cycle less often.
