We're sorry, but we no longer offer this item.
Call us at 1-800-944-4573 for personalized recommendations
check out these similar items that may be a good fit
Product Description
This IMAGin WindowVIEW 6mil 60/40 Perforated 54" x 164' One-Way Visibility Film is a promotional 6-mil soft white vinyl film, coated with a black semi-permanent adhesive and a 60/40 perforation with a 1.6 mm hole diameter and 2.4 mm between holes for one-way visibility. It is supplied with an 86# stable white kraft liner. This print media is designed for solvent and eco-solvent ink jet printing for window graphics viewed from one side and “see-through” from the other side.
Product Details
- Features and Benefits:
- 60/40 hole to printable media ratio.
- View graphics from one side and "see-through" from other side.
- Solvent and eco-solvent printable.
- One year outdoor durability.
- Typical Uses:
- Transit
- Storefront advertising
- Use with:
- PERMACOLOR RAYZor
- Physical Properties
Property Typical Values Test Method Quick Tack, lb. /in² (N/25mm)
Glass
1.40 - 2.3 (6 - 10)FTM - 9 Peel Adhesion lb./in. (N/25 mm)
180° on Glass
- 24 hr.
1.0 - 2.0 (4.5 - 8.5)FTM - 1 Dimensional Stability, %
48 hours @ 158°F (70°C)
max 0.2FTM - 14
10" x 10" Sample
Bonded to aluminumTemperature Range
Minimum Application:
End Use:
50°F (+10°C)
0°F to 140°F (-17°C to 60°C)
- Values given are typical for unprocessed product and are not for use as specifications. Processing may change the values.
Warning: Application of vinyl film that renders emergency exit windows inoperative is prohibited under National Traffic and Motor Vehicle Safety Act of 1966 (recodified at Title 49 U.S.C.) The application of vinyl film over the emergency exit window seals will not permit the emergency exits to function as intended. This creates a safety hazard. In order to permit the exits to function, it is necessary to trim properly around the emergency exit seals. Often, the window seals do not coincide with the window frame edge.
If a manufacturer, distributor, dealer or motor vehicle repair business renders an item of safety equipment inoperable, they are subject to civil penalties outlined in 49 U.S.C. § 30165 (a penalty of not more than $5,000 for each violation, maximum penalty under this subsection for a related series of violations is $15,000,000). - Durability
The outdoor durability of the unprinted film is 1 year. However, actual durability of the printed graphic is dependent on the inks and overlaminates used. Some adverse reactions may occur when applying WP129 to certain substrates such as acrylic, glass, polycarbonate, polystyrene, plasticized PVC, rubber window seals and certain paints. These reactions have a negative effect on the adhesive performance. - Glass Breakage
MACtac accepts no liability for glass breakage due to temperature differences across the glass which can be caused by sunlight on dark areas of the graphic. Size, thickness, quality of cut, edge treatment, tinting and frame design all effect temperature stress. - Shelf Life
1 year from D.O.M. when stored at 60/77°F (15/25°C) and 50% relative humidity in the original package. - Approved Print Methods:
Screen Printing: HP Indigo ☐ UV Cured ☐ Off-set ☐ Solvent ☐ Off-set UV ☐ Digital: UV Inkjet ☐ Thermal Transfer ☐ Eco-solvent ☒ Flexographic ☐ True solvent ☒ Laser ☐ Latex ☐ Jetrion ☐
To achieve the best possible print quality, please make sure that the correct ICC profiles or printer settings are used. Profiles can be obtained from our Distributors or can be downloaded from www.mactac.com. Printer and heater settings and ICC profiles can also be downloaded from some O.E.M. or software manufacturer’s websites.
The ICC profiles are provided solely as a customer resource. Print environments, the individual nature of printing systems, inks and software can significantly affect output. It is the customer’s responsibility to determine the suitability of any profile for use in their specific print environment. - Limitations
- 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide.
- 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations.
- 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
- Recommendations
Always test your combination of WindowView products, inks and laminating films prior to commercial use.
- 1) Printing Conditions: Print in conditioned pressroom at ±73°F (23°C) and 50% RH. The maximum allowable ink saturation is 270%.
- 2) Drying Requirements: Solvent, Eco-solvent and Mild-solvent inkjet prints require 24 - 48 hr. drying time - open to the air. Inks do not dry when printed media is rolled up. The prints must be dry prior to lamination.
- 3) Laminating Conditions: If the printed graphic is likely to be exposed to water, corrosive liquids, smoke, fumes, and highly polluted areas or there is a likelihood of scratching, it is highly recommended to laminate only with optically clear Permacolor SAG 36, SAG53 or LF3648 RAYZor laminating films.
- 4) Transportation Conditions: To allow for easy transportation, IMAGin JT5000 series can be rolled up, with the image out, with a minimum diameter of 6 inches (15cm). When the image is not protected by an overlaminate, make sure the print is completely dry and protected in a plastic bag. During transportation or storage, avoid exposing them to extreme temperature and humidity changes.
- 5) Application: The “dry” method is recommended. The “wet” application method is not recommended due to the fact the moisture will become trapped between the perforations and overlaminate, therefore affecting the “see-through” visibility.
- 6) Trimming and Finishing Windows: Window trimming needs special care depending on the type of window you are marking:
- a) Contact with Rubber Window Seals will cause the adhesive to fail. Therefore, graphics need to be trimmed off the rubber seals by 1/8 inch minimum.
- b) Windows with beveled edges need to have the graphic trimmed away from the edge at a 45° angle to eliminate a hard edge that is easily peeled back.
Specifications
- Adhesive Type: Permanent Acrylic
- Color: White
- Films: Vinyl (PVC)
- Finish: Gloss
- Length: 164'
- Width: 54"
- Liner Category: 86# White Kraft
- Outdoor Durability: 1 Year
- Precise Program: N
- Thickness: 6.0 mil
Subscribe to Get Exclusive Offers!
Receive a 10% off coupon for just signing up.
Partners
Copyright © 2026 MyBinding
