We're sorry, but we no longer offer this item.
Call us at 1-800-944-4573 for personalized recommendations
or check out these similar items that may be a good fit:
Lassco Wizer W115 Skrebba Heavy Duty Flat and Saddle Stapler
- 0
- 1
Product Description
Product Details
- Flat and saddle stapler
- Binds up to 55 sheets at a time
- Manual with lever action
- Easy to use clamp for mounting on any desk or bench
- Part Number: W115
- Warranty:1 Year on all parts and labor excluding consumables
Demonstration Video
Lassco Wizer W115 Skrebba Stapler
First, you can adjust the edge guides to some pretty long lengths, but you’ll see my standard sized page is too small of the guides, so I’ll have to use the ones engrained on the base instead.
When doing a saddle staple, make sure the push the back edge guide back and out of the way.
But now it’s just a simple press of the lever for a booklet stapled perfectly in the center of the crease.
You can rotate the base to also staple in a standard flat position. Just reposition the anvil into the other sli ... Read More
This is the Lassco Wizer W115 Skrebba Heavy Duty Flat and Saddle Stapler!
First, you can adjust the edge guides to some pretty long lengths, but you’ll see my standard sized page is too small of the guides, so I’ll have to use the ones engrained on the base instead.
When doing a saddle staple, make sure the push the back edge guide back and out of the way.
But now it’s just a simple press of the lever for a booklet stapled perfectly in the center of the crease.
You can rotate the base to also staple in a standard flat position. Just reposition the anvil into the other slit in the base—also fit the base into the back to support in.
Now I can set the back stop, and staple my pages.
To change out the staples, first pull the staple rod in, then up, and then out.
You can insert several sizes of heavy duty staples up to 1/2”, supporting up to 75 sheets of paper.
Insert it in the back and place the rod back in. To remove staples you have to push them out from the front with the staple removing metal piece. And they should come out the back.
Here is a final look at the whole unit.