Max HD-50F Black Flat-Clinch Half-Strip Standard Stapler
14.80
NewCondition
InStock
Max HD-50F Black Flat-Clinch Half-Strip Standard Stapler
SWIPE FOR MORE IMAGES
- 0
- 1
Product Description
The Max HD-50F Black Flat-Clinch Half-Strip Standard Stapler is cut by 30% thanks to the unique twin-lever mechanism. Staples up to 23 sheets. Staples clinch flat so papers stack neatly. Metal and high-impact plastic construction. Easy-grip top, non-skid rubber base. 3" throat depth. Top loads a half strip (105) of standard staples. Black. Manufacturer's one-year Manufacturer's Warranty. All sheet capacities are based on 20-lb. bond.
Product Details
- Flat Clinch Mechanism Clinches a staple totally flat, allowing neater papers and eliminates finger cuts and clothing snags.
- Ergonomic styling provides comfortable stapling with the rubber grip cap and base.
- Loads 50 staples of MAX No.3-1M(24/6) or 105 staples of MAX No.35-5M(26/6)
- Built-in staple remover.
- Easy grip top section for a more secure hand hold.
Item Specifications
- Stapling Capacity: 2-30 sheets of (64gsm papers)
- Load Capacity: 26/6: 105 staples and 24/6: 50 staples
- Throat Depth: 47 mm
- Staples: MAX No.3-1M (24/6) and MAX No.35-5M(26/6)
- Dimensions: 1-5/8"(W) x 5-5/16"(L) x 2-15/36"(H)
- Part Number: HD-50F-BK
- Manufacturer's Warranty:1 year on parts and 90 Days on labor
Demonstration Video
Max HD-50F Flat-Clinch Half-Strip Stapler
Transcript:
This is the Max HD-50F Black Flat-Clinch Half-Strip Standard Stapler!
To begin, pull the cover up and insert a half strip of standard 1/4” staples. Then close it back up.
You can safely staple up to 23 sheets at a time as seen here.
It comes out with a nice flat staple—the flat clinch design really produces the best results. It’s an interesting and clever design.
On the back is also a basic staple remover—though don’t expect greatness from it. You usually end up pulling the staple out by hand to some degree.
On the bottom is a single circular grip. It only grips the front of the ... Read More
To begin, pull the cover up and insert a half strip of standard 1/4” staples. Then close it back up.
You can safely staple up to 23 sheets at a time as seen here.
It comes out with a nice flat staple—the flat clinch design really produces the best results. It’s an interesting and clever design.
On the back is also a basic staple remover—though don’t expect greatness from it. You usually end up pulling the staple out by hand to some degree.
On the bottom is a single circular grip. It only grips the front of the ... Read More
This is the Max HD-50F Black Flat-Clinch Half-Strip Standard Stapler!
To begin, pull the cover up and insert a half strip of standard 1/4” staples. Then close it back up.
You can safely staple up to 23 sheets at a time as seen here.
It comes out with a nice flat staple—the flat clinch design really produces the best results. It’s an interesting and clever design.
On the back is also a basic staple remover—though don’t expect greatness from it. You usually end up pulling the staple out by hand to some degree.
On the bottom is a single circular grip. It only grips the front of the stapler, which is ok—it works fine still.
As a last note, instead of a spring on the inside, the staple pusher-thing is held on by a strong plastic piece.
To begin, pull the cover up and insert a half strip of standard 1/4” staples. Then close it back up.
You can safely staple up to 23 sheets at a time as seen here.
It comes out with a nice flat staple—the flat clinch design really produces the best results. It’s an interesting and clever design.
On the back is also a basic staple remover—though don’t expect greatness from it. You usually end up pulling the staple out by hand to some degree.
On the bottom is a single circular grip. It only grips the front of the stapler, which is ok—it works fine still.
As a last note, instead of a spring on the inside, the staple pusher-thing is held on by a strong plastic piece.
Recommended for you
-
Swingline 747 Royal Blue Business Stapler - 74729 - Clearance Sale
$14.76
Regular: $18.09
You save: 18%