MHL Scribe 3mil 51" x 500' Dry Erase Laminating Film
441.69
NewCondition
OutOfStock
We're sorry, but we no longer offer this item.
Call us at 1-800-944-4573 for personalized recommendations
or check out these similar items that may be a good fit:
MHL Scribe 3mil 51" x 500' Dry Erase Laminating Film
SWIPE FOR MORE IMAGES
- 0
- 1
Product Description
MHL Scribe 3mil 51" x 500' is an economical thermal overlaminating film with a dry-erase gloss finish. It can be written on with black dry-erase markers and wiped clean with a dry cloth or eraser. The most common applications for MHL Scribe include re-usable presentation boards, schedules, vacation planners, maps and courtroom displays. MHL Scribe can also be used in conjunction with Ferro to create dry-erase magnet-receptive calendars and coaches play boards. However, MHL Scribe is not recommended for coated inkjet output with high ink coverage or for use with colored dry-erase markers. Protac Scribe would be a superior choice for such applications. Get 51" x 500' of 3mil MHL Scribe Dry Erase film with every order. Product number MS51503.
Product Details
- Film Width: 51"
- Film Length: 500'
- Film Thickness: 3.0mil
- Core Size: 3"
- Finish: Dry-erase Gloss
- Base Film: 0.75mil (19 micron)
- Adhesive: 2.25 mil (56 micron) polyethylene copolymer
- Initial Tack: None
- Application Speed: 2' - 10' per minute
- Application Temperature: 210 F - 240 F
- Release Liner: None
Item Specifications
- Specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators
- Co-extruded for a carefully balanced ratio of polyester film to adhesive.
- Higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out).
- Available in a variety of thicknesses and finishes from standard gloss and lustre finishes to scratch-resistant films suitable for outdoor applications
- Suitable for both single sided and double sided laminating (encapsulation) of photographic, electrostatic, inkjet-bond, xerographic and lithographic output, as well as many more applications.
- Incorporate UV absorbers for excellent protection from damaging UV rays.
Recommended for you
-
5 Mil Standard Roll Laminating Film - 1" Core
Starting At: $38.49
-
10 Mil Standard Roll Laminating Film - 1" Core
Starting At: $51.49
-
Laminating Workstation
$321.49
-
Sooper Media Roll Clips
Starting At: $30.20
-
Core ID Cards for Vinyl Rolls
Starting At: $11.69
Tips and Technical Data
Tips For Applying MHL UV Thermal Films:
- Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down.
- Co-extruded for a carefully balanced ratio of polyester film to adhesive.
- Use your idler bar to increase the area of contact between the heated rollers and the film.
- To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results.
- MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
Technical Data
MHL Scribe is a 3 mil (75µ) high clarity, abrasion-resistant PP thermal laminating film with a gloss fi nish. The film is engineered with a specially formulated copolymer thermal adhesive for a low melt-point for single-sided lamination. With its dry erase characteristics, black dry erase markers can be wiped clean with a dry cloth.
Typical Applications
- Ideal for laminating book jackets, report covers and other specialty applications.
- Suitable for courtroom displays.
- Can be used for short-term dry erase boards.
Physical Characteristics
Film Thickness | 3 mil (75µ) |
---|---|
Film/Adhesive Ratio | 0.5:2.5 |
Processing Temperature | 210°F to 230°F (99°C to 110°C) |
Shelf Life | Use within 1 year after opening original box |
Storage Conditions | 59°F to 72°F (15°C to 22°C);50 - 55% Relative Humidity |