We're sorry, but we no longer offer this item.
Call us at 1-800-944-4573 for personalized recommendations
check out these similar items that may be a good fit
Product Description
This Artshield Emerytex UV 51" x 50' Overlaminating Film is a 5mil Heatset PVC (vinyl) scuff-resistant, pebble textured matte laminating film that provides excellent UV protection. This 51" x 50' Artshield Emerytex UV is perfect for images that will be displayed in high traffic areas and/or subject to extensive handling, such as mouse pads, place mats, trade show displays, and more.
Product Details
- Finish: Pebbled Textured Matte
- Film Length: 51"
- Film Width: 50'
- Film Thickness: 5mil
- Base Film: 4.0 mil (100 micron) PVC (vinyl)
- Adhesive: 1.0 mil (25 micron) acrylic
- Release Liner: Moisture stable paper
- Initial Tack: Low
- IApplication Temperature: 185°F-210°F (85°C-99°C)
- Dwell Time: 4-10 minutes
- Application: Fine Art Prints, Picture Framing/Photography
- Part Number: ET51050PP
Technical Data
Artshield Emerytex is a 4 mil (100µ) embossed, UV stabilized, pre-perforated clear PVC laminating film with a matte pebble textured finish, coated on one side with a heat activated solvent acrylic adhesive that is protected by a moisture stable bleached Kraft gridded release paper coated on one side with siliconized PE.Typical Applications
- Ideal for images that will be displayed in high traffic areas or are subject to extensive handling, such as mouse pads, placemats or tradeshow displays.
Product Structure
| Film | Matte Pebble Textured Perforated PVC |
|---|---|
| Adhesive | Solvent Acrylic (Heat Activated) |
| Release Liner | 1 Side PE Coated Bleached Kraft Grid Paper (Moisture Stable) |
Physical Characteristics
| Film Thickness | 4 mil (100µ) |
|---|---|
| Adhesive Layer | 1 mil (25µ) |
| Film/Adhesive Ratio | 4:1 |
| UV Protection Factor | Film contains UV stabilizers, which prevent film degradation and provide UV protection to the underlying image |
| Outdoor Durability | Not Applicable |
| Service Temperature Range | -4°F to 203°F (-20°C to 95°C) |
| Peel Strength (20 min, FTM1) | 18 N/25mm |
| Shelf Life | Use within 1 year after opening original box |
| Storage Conditions | 59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity |
Process Settings
| Equipment Type | Temperature | Dwell Time |
|---|---|---|
| Roller Laminator | Not recommended | |
| Press | 185°F to 210°F (85°C to 99°C) | 4-10 minutes |
Subscribe to Get Exclusive Offers!
Receive a 10% off coupon for just signing up.
Partners
Copyright © 2026 MyBinding
