We're sorry, but we no longer offer this item.
Call us at 1-800-944-4573 for personalized recommendations
check out these similar items that may be a good fit
Product Description
The Ledco Premier 4 25" roll laminator is the epitome of reliability, quality, and versatility. Designed for copy shops, print shops, business service centers, laminating services, schools, sign/banner shops, graphic departments, and more, the Ledco Premier 4 laminator combines the features of commercial sized laminators into a mid-range machine easily capable of handling every lamination job you have. Equipped with variable speed control, laminate slitters, swing-away heat shoes, forced air cooling, and much more, the Premier 4 25" roll laminator is the go-to machine for all of your lamination requirements. Check out this laminator and save today while buying from MyBinding.com. This machine is also available in 220V if needed please contact our customer service department and they will be happy to help you.
Product Details
- Variable Speed. Operates at any speed up to 10 feet per minute. Thicker films are generally applied better at mid-range to lower speeds, while 1.5 mil film should be applied at mid-range to higher speeds.
- Digital thermometer and temperature control. Makes it easy to set and maintain the right temperature. The digital indicator light flashes as the machine warms up. At set temperature the indicator light stops flashing and a ready light comes on.
- Simple controls. Membrane switches provide a compact, reliable control pad. Icons and international symbols are used for controls and safety warnings so that understanding operation of the laminator is "intuitive" and not language dependent.
- Slitters. Experts know the value of slitters for laminating a quantity of same-size sheets. The slitters remove the side scrap from both sides of each sheet as it goes through the laminator. This greatly reduces the amount of time required for trimming.
- Glitch-proof threading. Threading can be the most difficult aspect of using a laminator, so the Premier 4 has built-in threading aids. The top idler is guarded from the top heat shoe for safety and easy threading. The bottom idler is attached to the feed tray. Once the upper and lower webs of film have been run through the machine, bottom idler threading is automatic when the operator puts the feed tray on the machine.
- Forced air cooling. Allows laminating with thicker films. Without a cooling system, thicker films will warp or ripple because they are still too hot when they come out the back of the laminator. With its four fans, the Premier 4 has a more effective cooling system than any other machine in its class.
- Ease of cleaning. The silicone rubber rollers and the heat shoes of a laminator should be cleaned regularly. The upper heat shoe on the Premier 4 swings away in seconds, making it far easier to clean the laminating rollers and the shoes.
- Attached safety shield. The polycarbonate shield is clear so operators can see their work. It does not conduct heat so they'll be protected from hot areas. It's fixed to the machine and placed so they'll naturally put it in the guard position before laminating.
- Lamination pressure. The rubber rollers are spring-loaded and preset to ensure correct and even lamination pressure. The pressure is easy to adjust if required.
- Supply roll tension. Simple knobs give operators the control they need to get wrinkle-free lamination ... just tighten to increase tension, loosen to decrease tension.
- Ease of maintenance. Like the Premier III, the Premier 4 is made to last. However, some items on a laminator do wear out. Even the high-quality silicone rubber used in the rollers loses flexibility over time. Extensive use may wear out the rollers, or an operator may cut a roller by accident. Rollers and other key parts can be changed quickly without dissembling the frame.
- Reverse. Can be invaluable at times to help avoid problems or clear miss-feeds.
- Pressure release control. Makes it easier to clear film and allows the rollers to turn during warm-up.
- Right and left adjustable feed guides.
- Made in the U.S.A. All parts, even motors and controls, are made here too!
- All electrical components conform to NRTL standards.
- 2 year factory warranty.
Specifications
- Laminating Width: Up to 25"
- Dimensions (LxHxD): 32" x 11" x 16"
- Laminating Speed: 0 - 10 feet per minute
- Electrical: 110 V 1500 watts, 15 amps
- Maximum Film Gauge (per side): 10 mils
- Max. Laminating Thickness: 1/8"
- Max. Film Roll Diameter: 5 1/2"
- Max. Film Capacity: with 1.5 mil (1000 feet) and with 3 mil (500 feet)
- Laminating Roll Diameter: 1 1/4"
- Film Core Size: 1"
- Warranty: 2 year Factory Warranty
Subscribe to Get Exclusive Offers!
Receive a 10% off coupon for just signing up.
Partners
Copyright © 2026 MyBinding
