We're sorry, but we no longer offer this item.
Call us at 1-800-944-4573 for personalized recommendations
check out these similar items that may be a good fit
Product Description
This 51" x 164' MediaTac consists of a smooth coating of Drytac's aqueous acrylic adhesive on both sides of a 0.5 mil polyester film carrier. The adhesive's new non-slip release liner allows boards pre-coated with MediaTac to stack safely without slippage. The 51" x 164' MediaTac adhesive is ideal for image decal and high volume mounting applications. This adhesive can be used for pre-coating mounting boards and for mounting prints to smooth porous substrates such as foam boards, cardstock, GatorFoam and tempered hardboard. All of this makes MediaTac an economical general purpose pressure-sensitive aqueous adhesive with a non-slip release liner. Product number PSA26-51164.
Product Details
- Roll Width: 51"
- Roll Length: 164'
- Core Size: 3"
- Laminate Type: MediaTac Adhesive
- Filmic Carrier: 0.5 mil (13 micron) clear polyester
- Adhesive Bond: Permanent
- Adhesive Base: High
- Application Speed: 1' - 8' per minute
- Application Temp: Room Temperature - 120F (49 C)
- Release Liner: Moisture Stable Paper (60 lbs) (100 gsm)
Technical Data
MediaTac is a 0.5 mil (12µ) clear PET film, coated on both sides with a pressure sensitive acrylic adhesive, one of which is protected by a bleached clay coated Kraft paper siliconized on both sides with a differential release. The adhesive is self-wound on the release liner.Typical Applications
- Developed for photo labs where a high grade of moisture stability within the mounting film is required.
- Ideal for high-volume mounting, including pre-coating boards and image decal applications.
- Recommended for mounting prints to smooth, porous substrates, such as white display board, foam boards, Gatorfoam, and tempered hardboard.
Product Structure
| Adhesive | Acrylic (Pressure Sensitive) |
|---|---|
| Film | Clear PET |
| Adhesive | Acrylic (Pressure Sensitive) |
| Release Liner | 2 Side Clay Coated, 2 Side Siliconized Kraft |
Physical Characteristics
| Film Thickness | 0.5 mil (12µ) |
|---|---|
| Adhesive Layer | 1 mil (25µ) on each side |
| Film/Adhesive Ratio | 1:0.5:1 |
| UV Protection Factor | Not Applicable |
| Outdoor Durability | Not Applicable |
| Service Temperature Range | -4°F to 248°F (-20°C to 120°C) |
| Shelf Life | Use within 1 year after opening original box |
| Storage Conditions | 59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity |
Process Settings
| Equipment Type | Temperature | Dwell Time |
|---|---|---|
| Roller Laminator | Room temperature to 104°F (40°C) | 1 ft to 8 ft (0.3m to 2.5m) per minute |
| Press | Not recommended | |
Subscribe to Get Exclusive Offers!
Receive a 10% off coupon for just signing up.
Partners
Copyright © 2026 MyBinding
