We're sorry, but we no longer offer this item.
Call us at 1-800-944-4573 for personalized recommendations
check out these similar items that may be a good fit
Product Description
This 1 Gallon of Visual Magnetics ActiveWall commercial grade Micro-Iron Latex primer is a latex, water-based primer used to activate wall surfaces that will receive InvisiLock magnet. The primer is designed specifi cally for use in dynamic wall space applications with the Visual Magnetics Graphic System. Visual Magnetics 2-sided InvisiLock fl exible roll magnet is applied over the ActiveWall primer coat allowing MagnaMedia to be layered and quickly changed. InvisiLock eliminates the need for using adhesives or other hardware that could damage the wall surface. ActiveWall surfaces can be overcoated with any color of interior wall paint while maintaining their magnetic receptive properties.
Product Details
- 100 square foot per gallon coverage.
- Primer is low odor, non-toxic, low VOC, and lead free.
- Water based for easy application clean up.
- Suitable for limited outdoor use.
- Attracts indefi nitely.
- Can be coated over with 6 layers of topcoat paint before reactivition is required.
- Made in the USA.
Specifications
- Size: 1 Gallon
- Color: Black
- Viscosity: 137 KU
- Solids by Weight: 82%
- Weight Per Gallon: 20.80 LBS
- pH: 8.3
- Fire Rating: Class A (ASTME-84-98)
Technical Data
Visual Magnetics ActiveWall commercial grade Micro-Iron Latex primer is a latex, water-based primer used to activate wall surfaces that will receive InvisiLock magnet. The primer is designed specifi cally for use in dynamic wall space applications with the Visual Magnetics Graphic System. Visual Magnetics 2-sided InvisiLock flexible roll magnet is applied over the ActiveWall primer coat allowing MagnaMedia to be layered and quickly changed. InvisiLock eliminates the need for using adhesives or other hardware that could damage the wall surface. ActiveWall surfaces can be overcoated with any color of interior wall paint while maintaining their magnetic receptive properties.Features and Benefits
- 100 square foot per gallon coverage.
- Primer is low odor, non-toxic, low VOC, and lead free.
- Water based for easy application clean up.
- Suitable for limited outhoor use.
- Attracts indefi nitely.
- Can be coated over with 6 layers of topcoat paint before reactivition is required.
- Made in the USA.
Physical Data
| Film | Black |
|---|---|
| Viscosity | 137 KU |
| Solids by Weight | 82% |
| Weight Per Gallon | 20.80 LBS |
| pH | 8.3 |
| Fire Rating | Class A (ASTME-84-98) |
Products / Sizes
| PRODUCT CODE | AVAILABLE SIZES |
|---|---|
| VMAWPQ-01QRT | 1 quart |
| VMAWP1-01GAL | 1 gallons |
| VMAWP3-03GAL | 3 gallons |
Required Tools for Installation
- 3/8" nap roller (foam roller not recommended).
- Painting pad or brush for cutting in.
- Wide metal putty knife or trowel for smoothing.
- Optional airless spray system with 5-17 tip.
- ActiveWall may be thinned with water.
Installation Surface Preparation
- Clean surface and verify that the area is free of grease oil, dirt, and other contaminants.
- Surface must be smooth for best results.
Recommended Application Instructions
- Mix the ActiveWall primer thoroughly by stirring it. For best results, temperature should be between 60°F and 90°F with humidity below 85%.
- Using a 3/8" nap roller (foam rollers are not recommended), apply a liberal coat of primer. Primer dries quickly. DO NOT OVERWORK. Let dry.
- Apply second coat of primer in 3 ft by 3 ft areas with same 3/8" nap roller. Using a wide sheetrock knife or trowel, immediately scrape fresh primer in an upward diagonal motion across the surface, applying firm pressure until you have spread the primer as thin as possible.
- Surface should now be smooth with low points fi lled with primer and high points removed.
- Continue applying the second coat of primer across the whole surface as directed above.
- Allow final primer coat to dry for 2 hours when topcoating with latex paints. Allow fi nal primer coat to dry for 24 hours when top-coating with oil based paints.
- If finish is a red or yellow it is recommended to apply a white primer between your ActiveWall and your final coat of paint.
- Easy clean up with soap and water.
- Do not exceed the recommended area of coverage of 100 square foot per gallon of primer.
Shelf Life
- Best if used within 2 years from the date of manufacture.
- Recommended storage conditions: 60-90° F. Less than 85% RH.
Product Safety
- ActiveWall primer poses no known health or safety issues and does not cause signal interference or damage with electronic equipment.
Downloadable Information
Technical Data Sheet Material Safety Data Sheet Drytac Product Catalog 2017
Subscribe to Get Exclusive Offers!
Receive a 10% off coupon for just signing up.
Partners
Copyright © 2026 MyBinding
