We're sorry, but we no longer offer this item.
Call us at 1-800-944-4573 for personalized recommendations
check out these similar items that may be a good fit
Product Description
This Visual Magnetics InvisiLock-30SE Sheet Magnet is a 24.375" x 50' adhesive-backed standard-energy black magnet that is designed specifically for use with the Visual Magnetics Graphic System. The InvisiLock-30SE can be applied to smooth interior fixture surfaces. The standard-energy surface supports up to 3 MagnaMedia layers allowing for special promotions or accents to be applied on top of a base graphic. This Visual Magnetics InvisiLock-30SE 24.375" x 50' Sheet Magnet can be cut and trim easily by utility knife or scissors.
Product Details
- Supports up to 3 MagnaMedia layers.
- Excellent lay flat.
- Proprietary polarity allows InvisiLock fixtures to lock in place.
- Flexible rolls for application to concave and convex surfaces.
- Easy to cut and trim with a utility knife or scissors.
- Magnet engineered to low gauss level for safety.
- Adhesive-backed magnet does not require ActiveWall® primer.
- Use with any MagnaMedia product.
- Best for indoor fixture applications.
- Do not roll this material to less than 4" diameter, as adhesive wrinkling may result.
Specifications
- Size: 24.375" x 50'
- Total Caliper: 30-mil / 762 Micron
- Opacity: 100%
- Gauss @ 0.25" gap : <1
- Pull Force: 91# / SF
- Adhesive Peel Adhesion: 8# / in
- Adhesive Tensile Strength (MD/CD): 10# / in
- Adhesive Elongation (MD/CD): 100 / 90%
Technical Data
Visual Magnetics InvisiLock custom engineered magnet is designed specifically for use with the Visual Magnetics Graphic System. VM-InvisiLock-30SE can be applied to smooth interior fixture surfaces. The standard-energy surface supports up to 3 MagnaMedia layers allowing for special promotions or accents to be applied on top of a base graphic.Features and Benefits
- Supports up to 3 MagnaMedia layers.
- Excellent lay flat.
- Proprietary polarity allows InvisiLock fixtures to lock in place.
- Flexible rolls for application to concave and convex surfaces.
- Easy to cut and trim with a utility knife or scissors.
- Magnet engineered to low gauss level for safety.
Application Information
- Adhesive-backed magnet does not require ActiveWall primer.
- Use with any MagnaMedia product.
- Best for indoor fixture applications.
- Do not roll this material to less than 4" diameter, as adhesive wrinkling may result.
Physical Data
| Total Caliper | 30-mil / 762 Micron |
|---|---|
| Opacity | 100% |
| Gauss @ 0.25" gap | <1 |
| Pull Force | 91# / SF |
| Adhesive Peel Adhesion | 8# / in ; Stainless Steel – 30 min. |
| Adhesive Tensile Strength (MD/CD) | 10# / in |
| Adhesive Elongation (MD/CD) | 100 / 90% |
Chemical Resistance
Resistant to water, detergent and alcohol. Not recommended for use in contact with aliphatic or aromatic hydrocarbons.
Shelf Life
One year when stored at 75° F (24°C) and 50% relative humidity or less.
Products / Sizes
| PRODUCT CODE | AVAILABLE SIZES |
|---|---|
| VM30SE-24050 | 24.375 in x 50 ft – 3 in core (61.9 cm x 15.2 m) |
Recyclability
VM-InvisiLock-30SE can be recycled using Visual Magnetics "Recycling Retired Graphics" program available for download at www.visualmagnetics.com.
Product Safety
InvisiLock magnet is a ferrite-based magnet and poses no health or safety issues. Unlike stronger, rare-earth neodymium permanent magnets, the multi-pole nature and lesser strength of ferrite magnets does not emit a strong magnetic field into the environment and therefore does not cause signal interference or damage with computerized equipment. At a gap of 0.25" or greater gauss readings are well below 1.0 and at 7 ft. the gauss level is “not recordable” using a Model 2010A Gauss Meter. Due to its low gauss emission, InvisiLock magnet is not recognized as a “magnetized material” per IATA (International Air Transportation Association) definition and therefore can be air shipped in bulk quantity.
Subscribe to Get Exclusive Offers!
Receive a 10% off coupon for just signing up.
Partners
Copyright © 2026 MyBinding
