These SpotOn Floor 200 Self-Adhesive Printable Vinyl are 8 mil (200µ) embossed printable white matte monomeric PVC film, coated on one side with a dot-patterned, removable pressure sensitive polyacrylate adhesive. The adhesive are protected by a single sided, siliconised clay coated kraft release liner. This high quality ink receptive embossed white vinyl was specifically developed for easy application. SpotOn Floor 200 has a post-printed anti-slip rating of R10, according to DIN 51130:2010, which allows for vibrant, slip resistant floor graphics without the need for lamination. Perfect for short-term indoor floor applications where graphics are applied to floor or ceramic tiles, sealed wood or concrete, waxed vinyl, marble, or terrazzo. These SpotOn Floor 200 White Matte Self-Adhesive Embosssed Printable Vinyl are compatible with (Eco) Solvent, Latex and UV printers.
| Film | 200µ White Matte Monomeric PVC |
|---|---|
| Adhesive | Dot Pattern Removable Polyacrylate |
| Release Liner | 135 gsm Siliconized 1 Side Bleached Clay Coated Kraft |
| Film Thickness | 8 mil (200µ) |
|---|---|
| Release Liner Layer | 0.6 mil (15µ) |
| Film/Release Liner Ratio | 8.0:0.6 |
| UV Protection Factor | Not Applicable |
| Outdoor Durability | Internal Use Only |
| Application Temperature | >41°F (5°C) |
| Service Temperature Range | 4°F to 149°F (-20°C to 65°C) |
| Slip Rating (Post-Printed) | R10 (According to DIN 51130:2010) |
| Shelf Life | 1 year |
| Storage Conditions | 64°F to 77°F (18°C to 25°C); 40 - 65% Relative Humidity |
Receive a 10% off coupon for just signing up.
Copyright © 2026 MyBinding
