Swingline Dial-A-Blade Plus Replacement Blade Kit - 9213RB

Welcome to MyBinding video. This is Swing blade's Dial-A-Blade Plus Replacement Blade kit. The blade fits in this Dial-A-Blade Plus and the GBC Accu Cut A4245 Pro. The first step is to remove the blade housing. Two screws on the front of the Dial-A-Blade allow you to do just that. Take care not to lose any pieces as you remove it. Keep things nice and neat and intact. The blade itself is extremely sharp so be very careful in handling. Do not touch the blades. The next step will be to remove the old blade. Use a screwdriver here on the Dial-A-Cut and again, with great caution, take the old blade out and swap it out with a new one. Exchange your blades, put it back into place, and screw it back together good and tight. With a Dial-A-Blade, make sure that you put the dial set to the right blade that's facing down. So whatever's up on the picture should be facing down with the blades. If you don't align it correctly at the beginning, you'll be doing it again. Trust me. I know. That's the power of editing. Make sure the housing is nice and secure and all the way in to its grooves. Replace those original twist in screws nice and tight, nice and even on both sides, and you're all set. Dial your blade at the one that you want and give it a trim. For more demos, reviews, and how-to's, check out MyBinding.com.