Xyron 1255 12" Professional Laminator - XM1255

Welcome to MyBinding Video. Let’s have a look at the Xyron 1255, a 12-inch professional roll laminator. Simple, sleek, and really easy to use, this laminator will allow you to laminate anything twelve inches or smaller. It’s easy to refill and change applications and there’s a built-in razor cut-off right on the back. Assembly is just a couple of snap-on steps and everything fits in one nice space and instructions included here right in the machine. There are different types of laminating cartridges you can use on this machine. Including normal and double sided laminating as well as adhesive, both permanent and repositional. It’s perfect for large and small objects, great for scrapbooking and photos, and has all kinds of business applications as well. So whether you’re preserving documents and photos, or making stickers or other crafty items, the Xyron 1255 is a great investment. Create a better way with Xyron. For more demos, reviews, and how to’s ,check out MyBinding.com.

If only there was a new technology that could do everything spray adhesive does and more without all of the fumes, odours and stickiness. Introducing the Xyron Pro 1255. It instantly applies permanent or repositionable adhesive and lamination to prints, photographs, mock-ups and lots more.

The Pro 1255 is perfect for use in Art, Graphic and Design Studios and for any business looking for a quick and easy method of presenting valuable artwork, including Design Studios, Architects, Construction Companies, Real Estate and Photographic Studios.

The simple drop in cartridge system; means that you can switch between applications in seconds. Because the Pro 1255 works without heat or electricity, it is instantly ready to use. Insert your document, turn the handle and trim using the integrated cutter. It really is that easy. When using permanent or repositionable adhesive, documents are dispensed using a transparent release liner, to protect the artwork. Simply discard the liner and then separate your document from the backing sheet and your print is ready for mounting. With repositionable adhesive, position your document onto the mounting board and if it's not quite square the first time, just lift and do it again.

So, forget those sticky moments, but don't forget that with the Xyron Pro 1255, you can also laminate prints for protection indoors and out. Environmentally friendly, the Xyron 1255 produces no fumes, nasty odours or mess, the machine works without heat or electricity and the cartridges are easy to load. Put one in your office or studio today.

The Xyron Pro 1255: safer for you, safer for the environment. For more information, contact your Xyron dealer.

Welcome to MyBinding Video. This is a how-to video on the assembly and refilling of cartridges for the Xyron 1255. It’s as simple to assemble and refill as it is to use. Step one is the handle. It goes on the right hand side fitting inside the groove. Included with your purchase is a small Allen wrench to tighten it down.  And then the tray, it slides right in and snaps. Push the tabs on both sides to pull it out. Everything  else is built right into the machine. On the inside of the cartridge loading cover are instructions to help you along the way.

To load or refill the cartridge, simply lift the cover and slide it down inside. All cartridges work the same way for this machine. First you'll need to remove the project table and open the lid. The cartridges are built with knobs on the side that slide down into these grooves. It fits right in and guides it all the way back. Make sure that the round adhesive side is facing toward the back and the label toward the front. Replace the loading table and you’re all set.

But before your first laminating job, you need to prime it. So remove the work table and with a piece of cardboard or hard card stock, prime the rollers by placing it into the rollers, winding it forward until it comes up the back side, and keep going until its nice and smooth and wrinkle free. Then with the built in razor on the back, slide it off and you’re all set. Replace that table you’re ready to go.

You'll quickly learn that the Xyron 1255 is capable of many different kinds of laminating. There is one- or two-sided, matte or glossy standard laminating. The permanent adhesive cartridge allows you to make stickers out of on anything that are permanently adhered. And there is also repositional or temporary adhesive. This allows you to make changes in your projects, allowing you to make a change from one surface to the other.

For more demos, reviews and how to’s , check out MyBinding.com.