Challenge Titan 200 20" Hydraulic Programmable Cutter with Light Beams
- 0
- 1
| Product Name | Item Number | Price | Qty | ||
|---|---|---|---|---|---|
| Wooden Cutter Safety Jogging Aid - 2-7/8" x 12" | 05CHG278JA | $75.00
|
|||
| Challenge Knocked Down (Skid will go thru 32" door) | CHSC17 | $450.00
|
|||
| Challenge Standard Inlaid Carbon Alloy Tool Steel Knife for Model 20/Titan 200 Paper Cutters | 05CHGA10034 | $185.00
|
|||
| Challenge Inlaid High Speed Steel Knife for Model 20/Titan 200 Paper Cutters | 05CHGA100341 | $340.00
|
|||
| Challenge False Clamp Plate for Titan 200 and 200BC Paper Cutters | 05CHLAA10061 | $290.00
|
|||
| Challenge 3" x 15" Magnetic Clamp Pads -Pack of 2 | CH50082 | $48.00
|
|||
| OEM Cutting Sticks for Challenge Titan 200 Paper Cutter - 12pk | 05CHGCS4166 | $31.80
|
|||
| Challenge Book Guide | CH5-7-M361 | $30.00
|
|||
| Challenge Knife Lifter Assembly for Titan 200 and 200BC Paper Cutters | 05CHL43108 | $140.00
|
|||
| Challenge Book Trimming False Clamp Plate for Titan 200 Paper Cutter | 05CHLAA10062 | $320.00
|
Product Description
Product Details
- Key Benefits/Features:
- User-friendly menu-driven LCD screen, fully programmable backgauge control with 99 channels, 9,801 total cut memory
- Variable mode data entry (fraction, decimal, metric)
- Automatic fraction to decimal calculation
- Electronic Clamp Pressure Control - (programmable per cut with TC option)
- Maintenance free red LED cut line light
- Table slot closure device
- Hydraulic cutting & clamping - motor runs only during cutting cycle
- Rugged steel & cast iron construction
- Lockable heavy duty casters for portability
- Top of machine offers large 14.5" x 36"/36.8 cm x 91 cm) work surface
- 1-year Manufacturer's Warranty
- Safety/Features:
- UL/cUL listed and conforms to CE and ANSI B65.3 safety specifications
- Two-hand push button control of cutting cycle with timed, non-repeat device
- Cutting area protection - choice of light beam safety curtain or Plexiglas shield
- Independent mechanical foot pedal clamping
- Fully enclosed sheet metal rear table safety cover
- Optional ergo-touch cut buttons reduce operator fatigue
- Included:
- (2) high speed steel knives
- (3) plastic cutting sticks
- (1) jogging aid
- (1) manual
- (1) tool kit
- (1) knife change safety holder assembly
Item Specifications
- Cutting Width: 20”/508 mm
- Clamp Opening: 3-1/4”/83 mm
- Clamping Force:
- Minimum 1,250 lbs/563 daN
- Maximum 2,500 lbs/1,125 daN
- Min Cut (w/out false clamp plate): 1/2”/13 mm
- Min Cut (with false clamp plate: 1-7/8”/48 mm
- Table:
- In Front of Knife 15-1/4“/387 mm
- Behind Knife 20”/508 mm
- Table Height: 36”/914 mm
- Metal side tables (light beam only): 12.2”x8.2”/310x208mm
- Overall Width: 39-5/8”/1006 mm
- Overall Length: 50-7/8”/1293 mm
- Overall Height: 53”/1350 mm
- Will pass through door:
- (assembled) 39-3/4”/1010 mm
- (side tables, light beams, & power switch out) 36-1/4”/920 mm
- (table/treadle/light beams out) 29”/737 mm
- Net Weight (approx.): 800 lbs/363 kg
- Shipping Weight (approx.): 980 lbs/444 kg
- Electrical UL/CUL Listed & CE:
- 1 1/2 H.P., Single-Phase, AC, 60 Hz, 208/230 Volts, 12 Amps, Service size 15 Amps. Power cord included. Requires Receptacle Type: NEMA 6-15R or 6-20R.
Demonstration Video
We’re doing the blade change of the Titan 200. Your first step is to loosen your quarter 20 screws up above the blade. Just back those all the way out. Once those are out of your way, you loosen your first slotted screw and remove.
Your second slot and remove. This is where your knife handles will be inserted. That’s your first handle. Make sure they’re good and snug so your blade doesn’t slide. Keeps you safe. Once they’re ... Read More
We’re doing the blade change of the Titan 200. Your first step is to loosen your quarter 20 screws up above the blade. Just back those all the way out. Once those are out of your way, you loosen your first slotted screw and remove.
Your second slot and remove. This is where your knife handles will be inserted. That’s your first handle. Make sure they’re good and snug so your blade doesn’t slide. Keeps you safe. Once they’re tight, take out the rest of your blade screws. To get your blade out or remove it, loosen your handles while still holding pressure up and then bring your knife down. Pull your knife out.
Now, you got your blade out. You loosen the two bolts on your scabbard, your knife carrier, and pull the screws. Dump the blade out. Try not to touch it. These blades are extremely sharp. Load in the dull blade. Put your handles back in the new blade that you’re gonna put in the machine. Move it back. Insert the tie bolts back into the knife carrier. Make sure that your screws are tight for shipping purposes. Then install your new knife.
When installing your new blade, start low on the right hand side, lift your left end up. Be very careful not to chip the edge of your blade. Then slide it into the carrier. Make sure you’re all the way to the top. Tighten your handles. Make sure they’re not gonna slip. And then insert your blade screws. Remove the two handles. Insert the last two remaining screws. Keep them snug, not overly tight, just snug. You do not want your blade to slide in this position. Now that your blade’s in, you’re gonna want to flip your cut stick or put a new cut stick in. Here, I flipped it to a clean side. All ready to go.
Notice: The videos in this collection are an enhancement to the service manual. Please refer to the manual for additional information, specifications and procedures.
When your actual cut sheet is longer or off from your display, an accuracy adjustment is needed. I use 11 x 17-inch piece of paper to cut over the whole area of a bad gauge. Set my machine to 2 inches. The machine will beep when it's there. Make your cut. Take out my strip. I get my measurement. Right now, my ruler says I'm at 1
Notice: The videos in this collection are an enhancement to the service manual. Please refer to the manual for additional information, specifications and procedures.
When your actual cut sheet is longer or off from your display, an accuracy adjustment is needed. I use 11 x 17-inch piece of paper to cut over the whole area of a bad gauge. Set my machine to 2 inches. The machine will beep when it's there. Make your cut. Take out my strip. I get my measurement. Right now, my ruler says I'm at 1
Resources
Staff Review
Challenge Titan 200 Cutter With Light Beams Review
If your workplace is in need of an extremely durable electric paper cutter that's also safe to use, one machine to check out is the Challenge Titan 220. This is a hydraulic trimmer with a lot of special features you're really going to appreciate. Let's take a look at it....
-
The Titan 200 is ideal for very large documents because it can handle items that are up to 30 inches wide and 20 inches deep. You can also use it to cut smaller pieces of paper such as those that are legal- and letter-sized.
-
This device is outfitted with a false clamp plate that will affect how much paper you can cut at once. When the clamp is engaged, you can cut a minimum of 1.875" and when it's not, the smallest stack you can trim is 1/2". The clamp has a maximum opening of 3.25" so you'll be able to cut hundreds of sheets at once. The cutting capacity is mainly due to this machine's incredible 1.5-horsepower motor.
-
The Titan 200 is equipped with some terrific safety features. For one thing, it requires two-handed operation so your hands won't be near the blade when your paper is being cut. (A foot pedal is also included.) There is a plexiglass safety shield over the rear table and there's a mechanical safety latch for the blade. Finally, there's a light beam near the cutter's opening so you can keep your hands away from the blade.
-
In order to give you an accurate cut, the Titan 200 has an illuminated cutting line. This line will show you where your paper will be cut so you can make any adjustments before trimming it. This machine has a number of other great technologically advanced features such as a digital keypad, an LCD display screen, and a memory that can store up to 99 programs. Plus, you'll be alerted if there's something wrong with the device so you can fix it.
-
If there's one thing that's going to impress you about the Titan 200, it's how big it is. This machine measures 53" (height) x 36" (width) x 49.556" (length) and it's just under 800 pounds. Due to its size, you should make sure your workplace has enough room for it before you place an order.
-
The Titan 200 is American-made so you can feed good about purchasing it. It's also extremely durable thanks to its steel and cast-iron construction. Challenge has given this device a one-year warranty.
The Challenge Titan 200 is an excellent electric paper cutter and it would be perfect for busy workplaces. This machine offers a great cutting capacity, an illuminated cutting line, and enough features to keep you safe no matter how much paper you cut. You'll find that this trimmer is extremely durable and it's great that it's made in the United States. Just make sure you have enough room before you purchase this device as it's very large. If the size isn't an issue, be sure to take a look at the Titan 200 today.
Related Categories you might also like
Replacement Blades and Accessories
| Product Name | Item Number |
| Challenge 20 Multi 2020 Titan 200 Replacement Blade | JH-31780 |
| Challenge 20 Multi 2020 Titan 200 High Speed Steel Blade | JH-31780HSS |
| Premium 20" Cutting Stick for Challenge 20, Titan 200, Multicut 2020 | JH-CS4075 |
| Standard 20" Cutting Stick for Challenge 20, Titan 200, Multicut 2020 | JH-CS4168 |
| Red Premium Cutting Stick for Challenge 20, Titan 200, Multicut 2020 | JH-CS5910 |
