Discontinued Binding Machines

We would like to reintroduce a couple or great binding machines from Renz that are perfect for either wire or comb binding. Our comb binding machine is capable of punching up to 25 sheets of paper and a lower level system allows the comb to be opened so you can easily slide your paper on. Next is our wire binding machine that is also capable of punching up to 25 sheets of paper and punches a 2:1 hole pattern. Both these options are manual, but the end result is the same. A perfectly punched hole every time.

Discontinued Binding Machines

We would like to reintroduce a couple or great binding machines from Renz that are perfect for either wire or comb binding. Our comb binding machine is capable of punching up to 25 sheets of...

500 Results
Show: | |
James Burn

features

  • Product Type: Sheet Detector
  • Compatible With James Burn BB420 Wire-O Binding Machine
  • Quantityr: 1PK
  • Part Number: 04JBBB420SPDSD
Free Shipping
Marlon

features

  • 110 Vac 2 Amp 50/60 Hz
  • Optional foot pedal operation
  • 90 degree cut angle
  • 50 cycles per minute
Free Shipping
Marlon

features

  • Optional foot pedal operation
  • 90 degree cut angle
  • 50 cycles per minute
  • 14 1/2" x 10" Footprint
Free Shipping
Luxor

features

  • Color: Gray
  • No. of Shelves: 3
  • Tub Shelves Depth: 2.5"
  • Maximum Weight Capacity: 400 lbs (evenly distributed)
Free Shipping
Luxor

features

  • Color: Black
  • No. of Shelves: 3
  • Tub Shelves Depth: 2.5"
  • Maximum Weight Capacity: 400 lbs (evenly distributed)
Free Shipping
Luxor

features

  • Color: Black
  • No. of Shelves: 2
  • Tub Shelves Depth: 2.5"
  • Maximum Weight Capacity: 400 lbs (evenly distributed)
Free Shipping
Luxor

features

  • Color: Gray
  • No. of Shelves: 2
  • Tub Shelves Depth: 2.5"
  • Maximum Weight Capacity: 400 lbs (evenly distributed)
Free Shipping
James Burn

features

  • Binding Format: Wire Binding
  • Binding and Punching Method: Manual
  • Max Punch Capacity (20# paper): 10 sheets
  • Max Bind Capacity (20# paper): 1/2"
Free Shipping
James Burn

features

  • Single D-shaped handle controls both punching and closing for both left and right handed operation
  • Individual punch pins can be disabled for custom punch patterns by simply pulling the pin lever
  • Will Punch up to 10 sheets of 20 lb bond in a single stroke
  • Closes all Double-O / Wire-O
Free Shipping
James Burn

features

  • Ergonomically Designed Loop Handle
  • Versatile: Adjustable Lay Gauge
  • Efficient: Removable Chip Collection Tray
  • Reliability: 100% Steel Construction
James Burn

features

  • Min Binding Format: 2-1/2" x 3-1/4"; Max Binding Width: 11.8" (300mm)
  • Wire-O size changeovers are done in 2-5 minutes.
  • Wire-O Sizes: 3:1 Pitch 1/4" to 9-16", 2:1 Pitch 5/8" to 1-1/4"
  • Skip Binding: Available in 3:1 Pitch up to 1 skip
James Burn

features

  • Sheet Capacity: up to 20 sheets
  • Output Cycle Speed: up to 8,400 cycles/hour ( 60# Offset)
  • Maximum Sheet Size: 15" x 15"
  • With Jogger
James Burn

features

  • Sheet Capacity: up to 20 sheets
  • Output Cycle Speed: up to 8,400 cycles/hour ( 60# Offset)
  • Maximum Sheet Size: 15" x 15"
  • With Conveyor
Free Shipping
James Burn

features

  • Easily interchangeable
  • Hardened steel punching die
  • High-volume use
  • Rectangular hole shape
Free Shipping
James Burn

features

  • Closes 3/16" to 1-1/4" wire
  • Handles up to a 14" Binding Edge
  • Versatility: Easily adjustable for perfectly closed wire
  • Construction: All metal construction makes it durable
Free Shipping
James Burn

features

  • Easily interchangeable
  • Hardened steel punching die
  • High-volume use
  • 3 round hole shape
Free Shipping
James Burn

features

  • Easily interchangeable
  • Hardened steel punching die
  • High-volume use
  • Square hole shape
Free Shipping
James Burn

features

  • Easily interchangeable
  • Hardened steel punching die
  • High-volume use
  • Round hole shape
Free Shipping
James Burn

features

  • Easily interchangeable
  • Hardened steel punching die
  • High-volume use
  • Rectangular hole shape
Free Shipping
James Burn

features

  • Easily interchangeable
  • Hardened steel punching die
  • High-volume use
  • Square hole shape
James Burn

features

  • Maximum punching thickness of 8 mm with split binding features
  • Simple control panel for job setup.
  • Fully automatic punching and binding is completed with just 1 operator.
  • Binding speeds up to 3,000 documents per hour, depending on the application and operator, making it one of the fastest automatic wire machines in its category.
Free Shipping
James Burn

features

  • Easily interchangeable
  • Hardened steel punching die
  • High-volume use
  • Square hole shape
Free Shipping
James Burn

features

  • Easily interchangeable
  • Hardened steel punching die
  • High-volume use
  • Round hole shape
James Burn

features

  • Finishes documents and calendars up to 20" in width.
  • High output speeds of 600-1200 books per hour, depending on finishing type and operator skill.
  • Automatically cuts wire to length, feeds and positions wire for insertion, and finishes hand fed pre-punched documents and calendars.
  • Accommodates all wire sizes from 1/4" up to 1", using either standard or jumbo spools in 3:1 and 2:1 pitches.

Showing 336 of 500 products

Frequently Asked Questions

Be careful with discontinued binding machines because replacement parts, dies, manuals, and matching supplies may be harder to find over time. A discontinued machine can still be useful if your office already uses that binding style and only needs matching information, support details, or a replacement path. For a new setup, choose an active machine style so supply availability and support are easier to manage. If you are comparing an older machine with a current model, check punch pattern, punch capacity, bind capacity, manual or electric operation, and whether the dies are fixed or disengageable. The best choice is the one your team can support long term.

Match the replacement to the same binding style first. Comb binding usually uses a 19-hole pattern for letter-size documents, so the new machine should support the same supply style if you want to keep using existing plastic combs. Then compare punch capacity, binding capacity, disengageable dies, margin depth adjustment, and manual versus electric punching. If the old machine handled custom sizes, choose a replacement with open throat punching or adjustable pins. Current comb binding machines are a better route for new purchases because supplies and product guidance are easier to confirm. Keep old manuals only as a reference, not as proof that replacement parts are still available.

Check the wire pitch before choosing a replacement. Wire machines commonly use either 3:1 pitch for smaller documents or 2:1 pitch for thicker documents. A machine made for one pitch will not punch correctly for the other. Also check whether the old unit used round or square holes, whether it had a built-in wire closer, and what wire sizes your office already stocks. If your documents need to open flat or fold back neatly, wire binding remains a strong choice. Compare current wire binding machines by pitch, punch capacity, closing control, and workload rather than by brand name alone.

No. Coil binding requires the correct punch pitch, hole style, document length, and coil size. Many coil systems use 4:1 pitch, but some workflows use other patterns, so the existing supplies should be checked before buying a new machine. Also decide whether the replacement should include an electric coil inserter, built-in crimping support, or fully disengageable dies for odd-size documents. If the old machine struggled with thick reports, choose a replacement with stronger punching and easier coil insertion. Current coil binding machines should be compared by pitch, punch capacity, punching length, and the volume your team binds each week.

Discontinued machines still matter because many offices own older equipment and need to identify compatible supplies, replacement paths, or limits before buying more materials. The risk is assuming that a supply fits just because the binding style sounds familiar. Comb size, wire pitch, coil pitch, strip format, and punch pattern can all vary by machine type. Before placing a supply order, confirm the machine name, punch pattern, sheet capacity, and binding format. If the old machine is unreliable, compare the cost of supplies and downtime against replacing it with a current model. A new machine may be cheaper than trying to keep a difficult old workflow running.