This 51" x 328' MHA (Multi-Heat Adhesive) is an economical, heat activated mounting adhesive with a moisture-stable release liner. MHA's initial tack is very low, making it easy to apply. This feature allows most prints to be repositioned on MHA pre-coated boards without damage. Once satisfied with the alignment, process the graphic and board through a heated roll laminator (185 F - 220 F / 85 C - 140 C) for a permanent bond. The 51" x 328' MHA's forgiving nature has made it a popular product with photographers for thinner "bond papers" such as graphic renderings, drawings, blueprints, color copies, courtroom displays, etc. Although MHA's initial tack is low, the bond insitantly becomes permanent once processed through a heated roll laminator. It is therefor suitable for flexible and rollable substrates such as expanded PVC graphic materials (e.g. Sintra). Use MHA in conjunction with MediaShiled overlaminate and MHL overlaminating films. Product number MHA51328.
| Adhesive | Solvent Acrylic (Heat Activated) |
|---|---|
| Release Paper | 2 Side PE Coated Bleached Kraft Differential Release Paper (Moisture Stable) |
| Film Thickness | Not Applicable (no carrier) |
|---|---|
| Adhesive Layer | 1 mil (25µ) |
| Film/Adhesive Ratio | Not Applicable |
| UV Protection Factor | Not Applicable |
| Outdoor Durability | 6 months will only show inconsequential changes in properties of the product |
| Service Temperature Range | -4°F to 175°F (-20°C to 79°C) |
| Shelf Life | Use within 1 year after opening original box |
| Storage Conditions | 59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity |
| Equipment Type | Temperature | Dwell Time |
|---|---|---|
| Roller Laminator | 185°F to 220°F (85°C to 104°C) | 1 ft to 8 ft (0.3m to 2.5m) per minute |
| Press | 195°F (91°C) | 3 minutes |
Receive a 10% off coupon for just signing up.
Copyright © 2026 MyBinding
