Product Description
The iTac Green Plus Ink Jet Media is the eco-conscious alternative to PVC. It is made with a multi-layered cast, polypropylene film with a reusable and washable adhesive. Removal is easy and mess-free. It leaves no adhesive residue and is highly repositionable. The media is suitable for smooth surfaces and can be used for floor graphics when laminated with ProtectWalk. Create visually appealing temporary vehicle graphics, counter mat material, elevator graphics, and temporary dance floors with this sustainable material. iTac Green Plus Ink Jet Media is suitable for digital and screen printing. Applications Temporary Vehicle Graphics Superb Counter Mat Material Elevator Graphics Short-Term Graphics on Granite, Marble, and Polished Stone Temporary Dance Floor/Event Graphics Printing Methods iTacGreen: Digital - UV & Latex; Screen Print; Offset iTacGreen Plus: Digital: Solvent, Eco-Solvent, UV, & Latex; Screen Print; Offset Advantages Easy Application on Smooth Surfaces and Removal with No Residue Washable, Reusable Adhesive Means Graphics May Be Used Again and Again Without Loss of Adhesion Laminate with ProtectWalk for Non-Skid Floor Graphics
Product Details
- Material
- Face Film:
Printable Biaxially-Oriented
Polypropylene
- Back Side: Opaque Silver Metallic
- Adhesive:
Proprietary Long-Term Removable
Repositionable Reusable
- Liner: Clear PET – 5 mil (125µ +/-10µ)
- Film Thickness: 3 mil (75µ +/-10µ)
- FR Certification: Not Tested
- Durability
- Interior: Up to 4 years
- Exterior:
Up to 3 Years - Vertical Exposure
under Normal Conditions.
- Environment: Humidity & Solvent Resistance – Good
- Shelf Life: 1 Year
- Storage Requirements: Store at 59°F to 68°F (+15°C to +20°C) and Relative Humidity between 45% to 70%
- Repositionable: Yes - Highly
- Application/Removal
- Application Temp: +50°F to +86°F (+10°C to +30°C)
- Service Temp: +0°F to +122°F (-17°C to +50°C)
- Removability:
Cleanly Removable with No Adhesive
Residue - Adhesion May Increase
Depending on Surface and Length of Time
- Removal Temp: +50°F (+10°C) or Greater
- Exclusions:
NOT to be Applied to PVC, Copper, or
Unpainted Metal, as the Application
May Become Permanent