Product Description
Discarding a hard drive is not as simple as tossing it in the trash. And even if you erase the drive by magnetically degaussing, are you sure the data is secure? The Formax FD 87HD Hard Drive Punch provides that added level of security by punching a hole through discarded hard drives, causing visible damage and making the stored data virtually unreadable. Simply load a hard drive into the feed chute, close the safety shield, and with the push of a button, the high-quality steel punch punctures the hard drive, which then slides into a convenient waste bin for storage until disposal or recycling. The FD 87HD punching die is made of hardened, nickel-plated steel for durability, and handles the two most common hard drive sizes, 2.5” and 3.5”, without any additional adjustments. LEDs illuminate the chamber during the punching process, visible through the transparent safety shield. The LED control panel displays the status and offers jam protection with auto reverse and automatic stop. In addition, sensors stop the motor automatically if the door is open or waste bin is full. The powerful geared motor is housed in an all-metal cabinet with casters for mobility and is designed for low operational noise. For that added measure of security, trust a Formax FD 87HD Hard Drive Punch to be sure your digital data doesn’t end up in the wrong hands.
Product Details
- Punching die made of hardened, nickel-plated steel.
- Powerful, efficient AC geared-motor with heavy duty steel gears for high performance and minimal noise.
- LED lights illuminate the punching chamber.
- Transparent safety shield.
- LED control panel.
- Auto Stop after each cycle.
- Auto Reverse: Built-in controls switch motor into reverse to clear jam, protecting the punching die.
- Convenient sturdy plastic waste bin.
- Low-noise design.
- Door Safety Sensor: Motor stops automatically if cabinet door is opened.
- All-metal cabinet with casters.
- Auto Sensor: When the waste bin is full, the motor stops automatically.
- Punches a hole through hard drive internals, rendering the stored data virtually unreadable.
- Accommodates the two most common sizes, 2.5" and 3.5", without any additional adjustments.
- Lifetime Limited Manufacturer's Warranty on punching die and 1-Year Manufacturer's Warranty on all other parts.
Specifications
- Punch Hole Size: .39" (10mm)
- Hard Drive Size: 2 1/2" or 3 1/2"
- Feed Opening: 4.65" (118mm)
- Punching Cycle: 14 seconds
- Dimensions: 19.68" W x 18.5" D x 35" H (500 x 470 x 890mm)
- Weight: 154 lbs. (70kg)
- Security Level: H-3 (DIN 66399 standard)
- Power Supply: 110V, 50-60Hz
- Part Number: FD 87HD
You May Also Like
Subscribe to Get Exclusive Offers!
Receive a 10% off coupon for just signing up.
Partners
Copyright © 2026 MyBinding
