T360 Total Trimmer 60" Material Cutter from Logan Graphics

Your Price

Pay Later Starting at

/ month*
Know More

Item# T360
Key Features


An all purpose board mounted substrate trimming tool ready to size virtually any suitable flat materials that can be cut with a razor blade. Foamboard, illustration board, mat board, Coroplast, watercolor paper etc. are all downsized quickly and accurately. It includes a 27" (69cm) squaring arm, pull style cutting head with auto-retraction after each cut, adjustable blade depth and cuts up to 1/2" (13mm) of suitable material. Includes extra blades. uses Logan replacement blade #267.

Product Details

  • 60" (152cm) capacity
  • Professional straight cutter for signs, graphics, art & framing.
  • Cuts up to 1/2 inch (13 mm) thickness (PVC foamboard, foamboard, honeycomb & corrugated plastic, vinyl & plastic film, mat board, illustration board, papers, fabric).
  • Adjustable knob depth settings of 1/8 inch (3 mm), 1/4 inch, (6 mm), 1/2 inch (13 mm).
  • Includes 5 #267 blades.
  • Safety features such as auto blade release and “twist and lock” blade cut setting.
  • Simple “knob adjust” depth setting.
  • Heavy duty 3/4 inch (19 mm) MDF composite board base, extra long 32 inch (81 cm) squaring arm, ergonomic cutting head, rubber bar grip, lifter bar .
  • Includes 10 extra blades. Uses blade #267.

Demonstration Video

T300 and T360 Total Trimmer Demo

Transcript: Included with the Total Trimmer is a base board, the cutting head, a squaring arm, width stop, extra blades, and the instruction manual. To assemble the machine, lift the guide rail and find the board slot. Use a screwdriver to remove the two screws that are in the board slot. Install the squaring arm and replace the screws. To install the blade, release the blade holding knob and insert one blade sharp side down. Tighten the blade holding knob and replace the cutting head to the neutral position. To set the blade depth, use the blade depth setting chart. Loosen the blade knob and adjus ...