Versa Switch for HD7725/HD7700/ HD7500 (horizontal paper feed)

Welcome to MyBinding video. Bookbinding projects come in many different lengths. A benefit of Rhin-O-Tuff's interchangeable dies is that all the pins are fully disengageable. You can remove any or all pins for your size project. This video will show you just how easy that is and it's the same for all of them.

Step one is to depress the pin retainer. Press down through the notch on the spring and disengage, or lift, the pin capture. And that is step two. Step three, remove any and all pins that you need just by pulling them straight up out of the slot. Finally, press down again on the pin retainer and replace the pin capture.

The different dies may punch different shaped holes and different punch patterns. However, their removal is essentially the same for every single kind. And as you know, replacing the die into the machine is as easy as can be. And that is easy die pin removal for a Rhin-O-Tuff die. For more how-tos, demos, and reviews, check out MyBinding.com.

Welcome to MyBinding video. Different looks and different books require different kinds of spines. With Rhin-O-Tuff, in a single machine you can have plenty of options. Within their binding systems, Rhin-O-Tuff has manufactured over 20 different interchangeable dies. Among the most common are 3:1 wire, 4:1 coil, and plastic comb binding. They are built solid, like all Rhin-O-Tuff items, and the fully disengageable die pins are all easily removed, so you can work with any size document that you need. And when a different project requires a different punch pattern, simply slide the old one out and the new one in, it's that easy. And that's Rhin-O-Tuff. For more demos, reviews, and how-tos, check out MyBinding.com.