Xyron 900 Lamination / Magnet Cartridge - LM907-10
37.19 NewCondition InStock

Xyron 900 Lamination / Magnet Cartridge - LM907-10

Part #: LM907-10
Brand: Xyron
  • Laminates one side and applies magnet to the other
  • Easy drop in cartridge
  • No heat, electricity or batteries required
  • Hot or Cold: Cold
  • Price Match Guarantee
  • Ships Free Over $75

$37.19

FREE shipping for orders over $75*

SWIPE FOR MORE IMAGES
  • 0
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
video

Product Description

This refill cartridge is 10' long and fits into a Xyron 900 Creative Station Laminator. It applies a permanent laminate to one side and a magnet to the other side. The Laminate / Magnet cartridge is perfect for creating photo magnets, shopping and to-do lists, signs, magnet frames, magnetic business cards, and much more.

Product Details

  • Laminates one side and applies magnet to the other
  • Easy drop in cartridge
  • No heat, electricity or batteries required
  • Width: 9"
  • Length: 10'
  • Part Number: LM907-10

Demonstration Video

Transcript: Welcome to MyBinding video. This is a look at the Lamination Magnet Cartridge refill by Xyron for the Creative Station nine-inch laminator by Xyron. First, remove the all-in-one unit from the box. Lift up on the tab and lift the lid. And then remove the other, or old, cartridge by pulling it straight up and out. With the edge tab facing toward the back of the machine, slide the new cartridge into the same slot. With your fingers, press down on that tab so that it goes underneath the roller. Close the lid all the way until it clicks, and let's begin. Place your project to be made into a magnet ... Read More
Welcome to MyBinding video. This is a look at the Lamination Magnet Cartridge refill by Xyron for the Creative Station nine-inch laminator by Xyron. First, remove the all-in-one unit from the box. Lift up on the tab and lift the lid. And then remove the other, or old, cartridge by pulling it straight up and out. With the edge tab facing toward the back of the machine, slide the new cartridge into the same slot. With your fingers, press down on that tab so that it goes underneath the roller. Close the lid all the way until it clicks, and let's begin. Place your project to be made into a magnet right on the top of the table facing up and roll it through with the handle on the right-hand side. It will slide right out the back and there is a built-in razor blade for precise cut. Use scissors or paper trimmer to trim all the edges, magnet on one side, the picture on the other. To conserve materials, do multiple pictures at one time by placing them side by side, running them through until there's enough margin to place the next one in, and forward it on through. Slice the whole thing off at once and then do your trimming. Creating personalized magnets has never been easier, cleaner, or faster. That is the Lamination Magnet Cartridge refill for the Xyron 900. For more demos, reviews, and how-tos on this product and many more, check out MyBinding.com.

Questions & Answers

Submit a New Question