Spinnit

Match the bit diameter to the fastener or binding method, not just to the drill. Smaller holes are usually better for screw posts, tags, and tightly fitted fasteners, while binder work often needs a larger, cleaner hole. Spinnit drill bits are available in common sizes from 1/8" through 1/2", so you can match the finished hole to your document hardware. Also confirm the bit style your machine accepts, because compatible drill bits can vary by drill family. Keep extra bits on hand if you drill coated stock, laminated sheets, or heavy workloads. You can compare replacement sizes under Spinnit drill bits.

Spinnit paper drills can be used for more than standard copy paper when the right bit, stack height, and setup are chosen. Laminated sheets, plastic-coated covers, and heavier materials need a sharp hollow bit and a careful feed rate so the hole stays clean. A dull bit can leave rough edges, excess paper dust, or heat buildup. Drill wax is useful because it helps the bit move through dense stacks with less friction. Avoid pushing the full rated capacity when the stock is slick, coated, or mixed with covers. Test a smaller stack first, then increase only if the holes stay clean and aligned.

A manual-lift Spinnit drill is usually enough when the same person drills moderate stacks, short runs, or occasional binder sets. A hydraulic model makes more sense when drilling is part of daily production, especially when thick stacks, repeated hole patterns, or multi-spindle drilling are common. Hydraulic lift action can reduce operator effort and improve consistency across longer runs. Multi-spindle models also save time because they drill several holes in one pass instead of requiring repeated repositioning. Before ordering, confirm stack thickness, table size, number of spindles, and whether the drill supports the hole pattern your team uses most often. Also check operator comfort if several people will share the drill.

Plan for consumables and maintenance items before the drill arrives. Extra hollow bits are important because bit sharpness affects hole quality and machine strain. Drill wax helps with smoother cutting, especially on thicker stacks or coated materials. A bit sharpener or sharpening service can reduce downtime if drilling is part of your daily workflow. Backer pads, stops, gauges, and other small parts also matter because worn support pieces can affect alignment and hole cleanliness. If the drill will be shared across departments, keep common bit sizes labeled and stored near the machine. Useful add-ons can be reviewed under Spinnit accessories.