We're sorry, but we no longer offer this item.
Call us at 1-800-944-4573 for personalized recommendations
check out these similar items that may be a good fit
Product Description
Blade not included with the knife. This Keencut HSGM HSG-0 Heat Knife is designed to work with the HSGM Heat Knife Carrier or HSGM Hot Cut System. Uses 120V, 60W. Part Number is 67100.
Specifications
- Work with: HSGM Heat Knife Carrier or HSGM Hot Cut System
- Power Supply: 120V, 60W
- Warranty: 1 Years
- Quantity: 1 Per Pack
- Part Number: 67100
Quick Reference Blade Guide
* NOTE: ALL CUTTERS IN RED ARE DISCONTINUED, but blades are still available for purchase.
| UTILITY BLADES | Box of |
Part Number |
Artist*/ Artist Plus* |
Evolution* | Evolution E2 |
Excalibur 5000 & 1000x |
Flexo*/Flexo Futura Cutter |
Javelin Series 2 |
|
|---|---|---|---|---|---|---|---|---|---|
 |
MEDIUM DUTY - CA50/019 This blade is used for cutting standard material up to 3/8” (0.375) thick. | 100 | 69108 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
 |
SUPERIOR QUALITY - CA50/010 Made out of surgical grade steel, this blade has a superior edge for performance cutting. (0.375) thick. | 100 | 69119 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
 |
KEENCUT XR - CA50/027 The XR long blade is used for cutting standard material up to1/2” thick; it is slightly longer than the standard medium-duty utility blade. | 100 | 69120 | ✔ | |||||
 |
GRAPHIK D.017 - CA50/032 Designed to cut a variety of boards up to 1/2" thick, the reversible blades make it ideal for left-handed and right-handed operators. | 100 | 69131 | ✔ | ✔ | ||||
 |
ACRYLIC SCORING KX33 The scoring blade is designed to score acrylics and Plexiglas; then snap along the scoring line. | 5 | 69109 | ✔ | |||||
 |
TECH D .012 This blade creates a double-ground knife-edge cut 0.012” thick. | 100 | 69136 | ✔ | ✔ | ||||
 |
TECH D .015 This blade creates a double-ground knife-edge cut 0.015" thick. | 100 | 69135 | ✔ | ✔ | ||||
 |
TECH S .012 This blade creates a single-ground chisel edge cut 0.012” thick. | 100 | 61199 | ✔ | ✔ | ||||
 |
TECH S .015 This blade creates a single-ground chisel-edge cut 0.015” thick. | 100 | 69137 | ✔ | ✔ | ||||
 |
28MM TEXTILE WHEELS The 28mm circular blade is used for cutting textiles, thin paper, fabric and other flimsy materials. | 10 | 69141 | ✔ | |||||
 |
45MM TEXTILE WHEELS The 45mm OLFA circular blade is used for cutting textiles, thin paper, fabric and other flimsy materials. | 10 | 69132 | ✔ | ✔ | ||||
 |
HSGM HEAT KNIFE (blade not included) Can be used with the Heat Knife Carrier on the Keencut cutter bars. | 1 | 67100 | ✔ | ✔ | ✔ | |||
 |
HSO-N BLADE Fine tip blade with 9mm of heated cutting area is designed for fine fabrics. | 1 | 67101 | ✔ | ✔ | ✔ | |||
 |
TYPE R BLADE Broad tip blade with 1.14” of heated surface is designed for general-use cutting. Cuts straight lines on synthetic fabric easily. | 1 | 67102 | ✔ | ✔ | ✔ |
Subscribe to Get Exclusive Offers!
Receive a 10% off coupon for just signing up.
Partners
Copyright © 2026 MyBinding
