The GBC Swingline Fusion 3000L 12" Laminator is ideal for mid size office use. You can use either 3 mil or 5 mil pouches with the Fusion 3000L 12" Laminator. The Fusion 3000L 12" laminator has a release button to quickly remove any jammed pouches. The Fusion 3000L also has an Auto shut off after 30 minutes of inactivity. It has a stylish compact design that works in any space. The Fusion 3000L has a limited 1 year Manufacturer's Warranty. Item number 1703075.
Product Details
Warms-up in only 1 minutes and 30 seconds
Laminating speed of 19" per minute
Intelligent Jam Alert System™ beeps until button is pressed to release jammed pouch
Maximum document width of 12"
Use with 3 and 5 mil thermal pouches
Cold setting available for smooth lamination results with pressure sensitive pouches
Green ready light and audible ready alert indicate when warm-up is complete
Intelligent Auto Power Off™ after 30 minutes of inactivity conserves energy
Fusion 3000L 12" Hot & Cold Laminator Swingline GBC Demo Video
Transcript :
Welcome to MyBinding video. Let’s take a look at the all new Fusion 3000L 12” Hot and Cold Laminator by Swingline GBC. GBC’s heat seal systems have all been revamped and renewed with the new Fusion line. The 3000L has a 12” wide throat opening for documents as large as 12 x 18. The warm up time is a quick 90 seconds and can handle up to 19” per minute in processing. Audible and visual ready indicators lets you know that you’re ready to go. The 3000L can handle 3 and 5mil in thickness and does both hot and cold laminating, which makes it great for photos and other heat sensitive documents. Afte ...
Welcome to MyBinding video. Let’s take a look at the all new Fusion 3000L 12” Hot and Cold Laminator by Swingline GBC. GBC’s heat seal systems have all been revamped and renewed with the new Fusion line. The 3000L has a 12” wide throat opening for documents as large as 12 x 18. The warm up time is a quick 90 seconds and can handle up to 19” per minute in processing. Audible and visual ready indicators lets you know that you’re ready to go. The 3000L can handle 3 and 5mil in thickness and does both hot and cold laminating, which makes it great for photos and other heat sensitive documents. After 30 minutes of inactivity, it has an auto shutoff feature to save both energy as well as wear and tear on your machine. It’s a great laminator for home and small and medium size offices, ID badges, name tags, menus, signs, certificates, charts, keepsakes, anything that needs to be laminated, you can do it here. The jam release button is right here on the top. In case something goes in crooked, jams up. Push the button, remove it and you’re on your way. That’s the Fusion 3000L. For more demos, reviews and how-to’s, check out MyBinding.com.
Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
Press to skip carousel
You can take 2-4 sheets of regular paper, fold in half to make it a little thicker and run it through the machine a few times. This should clean the rollers. As far as frequency goes, it really depends on how often you use the machine. If the machine is used quite often, I would recommend to clean once a month or so.
If the 4" that are laminated at the top are flat and have no creases or wrinkles in them, it's generally safe to put the pouch back through. However, if you do not have a perfectly flat document, there is a risk of jamming the laminator, so we would not recommend sending it through again.
We never recommend using left over pieces of a pouch, as you risk damaging the laminator and rollers.If you are using a thin media, such as copy paper, and you need more rigidity, I would recommend using 10mil pouches. Alternatively, if you are using a thicker card stock media, you can use a 3 mil pouch.
1. You can send a cleaning card through the machine to help clean the rollers. Try this 2-3 times and try laminating again to see if it fixes the issue.
My machine was working fine I bought it about two months ago and when I went to use it today nothing happened, I changed to different plugs and still nothing is there a fuse that could have blown out or something puzzled.
