Product Description
The Drytac 51" x 328' Dry Mount Film is a dry mounting tissue for mounting irregular surfaces. This 51" x 328' Dry Mount Film Mounting Tissue is a thin PVC carrier, coated on both sides with an acrylic heat-activated adhesive. Each side of the film is protected by a high quality moisture stable paper release liner. When the film is ready for use, the release paper is removed, exposing a low initial tack adhesive allowing positioning of a print without the use of a tacking iron. The print can then be repositioned at any time prior to inserting into a heated press. this 51" x 328' Dry Mount Film is ideal for mounting to canvas, heavily grained or textured substrates, and most other irregular surfaces like most metals.
Specifications
- Film Length: 328'
- Film Width: 51"
- Film Thickness: 50µ (2 mil)
- Release Liner: 1 Side PE Coated Bleached Kraft Grey Grid Paper (Moisture Stable)
- Adhesive: Solvent Acrylic (Heat Activated)
- Carrier: Clear PVC
- Adhesive Layer: 25µ (1 mil) on each side
- Ratio Film / Adhesive: 1:1
- Heat Resistance Range: 70°C - 95°C (158°F - 203°F)
- Adhesive Type: Acrylic
- Adhesive Bond: Permanent
- Initial Tack: Low
- Processing Temperature: 185°F-212°F (85°C-100°C)
- Dwell Time: 60-90 seconds
- Application: Fine Art Prints, Picture Framing/Photography, Plaque Mounting
- Part Number: MF51328
