0
Promotions & Deals
Contract Holder Contract # GS-03F-053AA
Need Help 1-800-944-4573 1-800-944-4573
Straight Cutter Elite from Logan Graphics - 701-1
$20.36 NewCondition InStock
Straight Cutter Elite from Logan Graphics - 701-1

Straight Cutter Elite from Logan Graphics - 701-1

Part #: LGN701-1
Brand: Logan
0 Questions, Ask a Question

Was: $30.95

Your Price: $20.36

You Save: 34%

Brand New Price Match Guarantee In Stock Ships Free Over $75 1 Year Warranty
Main Features:
  • Pivot & pull style 90° straight cutter with ergonomic handle.
  • Sliding adjustable blade depth control with 3 depth settings for 4 ply mat board, 3/16” (5mm) foamboard and safety storage.
  • Can be used against any suitable straight edge or instantly adaptable to various Logan rail and board mounted systems.
  • Includes five extra blades.

ProductDescription

Pull type 90-degree straight cutter has comfortable 3"(7.62cm) ergonomic handle. Features an adjustable depth pivot cutting action. Use with any suitable straight edge. Three depth settings: safety, single sheet, and 3/16" (5 mm) foam board. The Straight Cutter Elite is ready to be instantly added on to Logan Adapt-A-Rule, Logan Team System, Logan Compact, Logan Artist Elite, Logan Simplex Plus, Logan Simplex Classic and Logan Simplex Elite series. Includes five mat cutter replacement blades. Uses Logan 270 blade.

Product Details

  • Pivot & pull style 90° straight cutter with ergonomic handle.
  • Sliding adjustable blade depth control with 3 depth settings for 4 ply mat board, 3/16” (5mm) foamboard and safety storage.
  • Can be used against any suitable straight edge or instantly adaptable to various Logan rail and board mounted systems.
  • Includes five extra blades.
  • Replacement blade #270.

ProductReviews

2 Review(s)
image alt text

Reviewed on 4/20/2017

Good cutter Review by JACK

I have tried to cut foam board before but the result was very poor.
As I watched a video of an Adorama team cut foam board with this cutter, I purchased one.
After experimenting with the cutter I got fairly good results. But then, I noticed that the cutter had a special little ridge, and after some thought, I realized that the cutter fit perfectly with my #301 mat cutter.
As I was going to cut 3/16"" foam board, I had some difficulty getting it into the mat cutter. So I raised the guide up with 3/16"" shims and now it works perfectly and I can't tell my cuts from a professional job.

image alt text

Reviewed on 3/28/2017

Found this in an instructional video - bought immediately. No more angled cuts! Perfect 90degree cuts on the outer edges of my mats. Neat and precise cuts for backing for photographs too. Easy to use. A must for matting or mounting photographs.

2 Item(s)

per page
  • 1 star
    1 star
    1 star
    1 star
    1 star

DemonstrationVideo

LOGAN 701-1 Straight Cutter Elite Demo

Transcript: The Straight Cutter Elite features three different depth settings: a storage setting, a standard-thickness mat board setting, and a setting for 316’s foam board. To install the blade onto the 701-1 Straight Cutter Elite, first remove the blade knob and the blade cover. Install one Logan 270 blade sharp side down, replace the blade cover, and then replace the blade knob. To downsize standard thickness mat board, see that the blade depth is set for the standard thickness setting. When using the straight cutter on a Logan rail, always use a slipsheet. Hook the straight cover onto the side of th... Read More
The Straight Cutter Elite features three different depth settings: a storage setting, a standard-thickness mat board setting, and a setting for 316’s foam board. To install the blade onto the 701-1 Straight Cutter Elite, first remove the blade knob and the blade cover. Install one Logan 270 blade sharp side down, replace the blade cover, and then replace the blade knob. To downsize standard thickness mat board, see that the blade depth is set for the standard thickness setting. When using the straight cutter on a Logan rail, always use a slipsheet. Hook the straight cover onto the side of the rail and pull straight back to make your cut.When using the straight cutter on a Logan board-mounted system, remove the slipsheet, hook the straight cutter onto the side of the rail, and pull back to make your cut. To cut 316 foam board, set the blade to the lowest setting. Align your straight edge over the top of the piece of foam board and hook the straight cover onto the side of the rail. Pull straight back to size the foam board.
Questions & Answers
No question have the been asked yet.
* Nickname:

* Your Answer:


Sign Up for Newsletter

Submit a New Question

Submit