For use on suitable Cosplay materials up top 3/16” thick.
Features an adjustable blade depth, ergonomic handle and on-board blade storage.
Transforms from a 90 degree straight cutter to a 45 degree bevel cutter.
Includes two blades and can be used with any suitable straight edge.
ProductDescription
Economy and versatility combine in the COS-Tools XTC6010 Straight/Bevel Cutter. Simply rotate the angled base block to transform from a 90 degree straight cutter to a 45 degree bevel cutter. The COS-Tools XTC6010 is for use on suitable Cosplay materials up top 3/16" thick. It is featured with adjustable blade depth, ergonomic handle and on-board blade storage.
This cutter includes two blades and can be used with any suitable straight edge. Note that always use scrap foamboard underlayment for best results. The COS-Tools XTC6010 Straight/Bevel Cutter uses replacement blades WC-5, WC-20.
IMPORTANT: Always use a scrap piece of foam board underneath the piece you are cutting. This is to protect the tool and extend the life of the blades.
Product Details
Economy and versatility.
Features include adjustable blade depth, ergonomic handle and on-board blade storage.
For use on suitable Cosplay materials up top 3/16" thick.
Simply rotate the angled base block to transform from a 90 degree straight cutter to a 45 degree bevel cutter.
Includes two blades and can be used with any suitable straight edge.
Use replacement blades WC-5 or WC-20.
90 Days Manufacturer's Warranty
Demonstration Video
Logan COS-Tools Straight/Bevel Cutter - XTC6010 Demo Video
Transcript :
To load a blade into the Cos-Tool Straight Bevel Cutter, first remove the blade holding knob, then align one blade sharp side down onto the blade holder, and replace the knob. Blade storage on the Cos-Tool Straight Bevel Cutter can be found on the back of the handle. The Cos-Tool Straight Bevel Cutter can be used either at a 90-degree angle cut or be converted into a 45-degree bevel cutter. To do this, loosen the knob at the base of the tool and rotate the block 180 degrees, and then re-tighten the knob. This converts the tool into a 45-degree bevel cutter. To use the Cos-Tool Straight Bevel C ...
To load a blade into the Cos-Tool Straight Bevel Cutter, first remove the blade holding knob, then align one blade sharp side down onto the blade holder, and replace the knob. Blade storage on the Cos-Tool Straight Bevel Cutter can be found on the back of the handle. The Cos-Tool Straight Bevel Cutter can be used either at a 90-degree angle cut or be converted into a 45-degree bevel cutter. To do this, loosen the knob at the base of the tool and rotate the block 180 degrees, and then re-tighten the knob. This converts the tool into a 45-degree bevel cutter. To use the Cos-Tool Straight Bevel Cutter, always use foam board underlayment under the foam you are cutting, extend the blade out, and use the reference marks on the tools. To set the depth, draw the tool across the foam to make a freestyle cut or it can be used against the Cos-Tool Channel Rail for a straight cut. To convert the tool from a 90-degree straight cutter to a 45-degree bevel cutter, loosen the screw at the base of the tool and rotate the block all the way around then re-tighten the knob. Now, the tool will cut at a 45-degree angle or the tool can be used freestyle. Visit our website to see the entire Cos-Tool family.
Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
Press to skip carousel
