Formax Cut-True 15M 17" Manual Paper Cutter

Formax Cut-True 15M, 16M, and 22S cutters. The Formax Cut-True 15M and 16M are manually operated guillotine cutters. All Cut-True cutters include a rugged metal stand. The 15M cuts paper stacks up to 2.15” high and can handle paper sizes up to 16.9” wide. The 16M easily cuts a stack up to 3.15” high and handles larger paper up to 18.7” wide. The back gauge easily adjusts forward and back for various paper sizes and cuts. A scale is located on the side rails with metric and standard measurements. The dial on the back gauge crank has additional markings for fine tuning. A spindle guided clamping system easily lowers the paper clamp in place for accurate cuts. The long lasting heat treated steel blade gives smooth clean cuts every time. Standard on all Cut-True cutters, the bright LED laser line provides visual accuracy. The transparent Plexiglas cover is part of the Cut-True safety system. It covers the blade during the cutting process. When in the open position, it locks the cutter lever in place preventing the blade from being lowered. As another safety feature, the back gauge crank can easily be disengaged when not in use. The Cut-True 22S semi automatic cutter. The Cut-True 22S effortlessly cuts through stacks of paper up to 1.75” high and up to 16.9” wide. It has all the features of the previous models with the addition of an electronic cutting system. The 22S has a power switch and key lock for security and safety. In addition, it utilizes two buttons to activate the cutter. Both buttons must be pushed at the same time to lower the cutting blade. Like the manually operated models, the Cut-True 22S has a metric and standard scale on the back of the gauge. It also features a digital LED display on the front panel ideal for fine tuning. Operator adjustment features: The blade cutting depth is easily fine tuned with the blade adjustment device. Changing blades and cutting sticks on the Cut-True is simple. On the 15M and 16M, a notch is located near the center of this stick for easy removal and replacement. The Cut-True 22S has a mechanical release for accessing the cutting stick. Blades can easily and safely be removed with the blade change tool. Remove the four outer screws. Then attach the blade change tool. Remove the center screw then safely remove and replace the blade. Formax Cut-True replacement blades and cutting sticks are a great value and up to 25% lower cost than competitors. Formax Cut-True cutters are feature rich and built to last.

"Formax presents the Cut True 15M and 16M guillotine cutters. Formax Cut True 15M and 16M cutters are ideal for transforming large digitally printed sheets into brochures, invitations, and more, making crisp, accurate cuts. These manually operated cutters are a welcome addition to the office and implant finishing operations and include a rugged metal stand. The 15M cuts stacks up to 2.15 inches high and can handle paper sizes up to 16.9 inches wide. The 16M easily cuts through a stack of up to 3.15 inches high and handles larger paper up to 18.7 inches wide. The back gauge easily adjusts forward and back for various paper sizes and cuts, a scale located on the side rails with metric and standard measurements. The dial on the back gauge crank has additional markings for fine-tuning. For added safety, the back gauge crank can be easily disengaged when not in use. A spindle-guided clamping system easily lowers the paper clamp in place for accurate cuts. The long-lasting heat-treated steel blade gives smooth, clean cuts every time. The bright LED laser line provides visual accuracy and is a standard feature on all Cut True cutters. The transparent plexiglass cover is part of the Cut True safety system. It covers the blade during the cutting process, and when in the open position, it locks the cutting lever in place, preventing the blade from being lowered. Operator adjustments and features on the 15M and 16M include a tool kit for operator adjustments. Changing cutting sticks on the 15M and 16M Cut True cutters is simple A notch located near the center of the stick for easy removal and replacement. The stick can be rotated and used on all four sides before being replaced. Blades can be safely removed with a blade change tool, which is included with each Cut True cutter. To adjust the blade cutting depth, use the tool provided to make the necessary adjustments. Formax Cut True replacement blades and cutting sticks are a great value, at 25 to 50 percent lower cost than competitors. Formax Cut True 15M and 16M cutters are ideal for transforming large digitally printed sheets into brochures, invitations, and more. Formax Cut True cutters are accurate, easy to use, and built to last. These manually operated cutters are a welcome addition to the office and implant finishing operations. "