A pack of 100, single ground, 0.012” thick blades, made from surgical steel in Sheffield, England. This is a higher-grade steel than most comparable blades on the market, giving increased durability and reduced blade tip wear/breakage. Blades are also oil free to ensure non-marking of material. This blade is used for bevel and vertical cutting in the Ultimat Futura, Flexo Plate Cutter. It can also be used with the Evolution3 Rocker head for the occasional cutting of aluminum composite panel, such as Dibond and Alupanel. The Rocker head is not a one-pass finished ACP cut like the SteelTrak, but by using a Tech-S.012 blade with a few careful strokes you can achieve a clean cut. We advise that you watch our video guide to perfect your cutting action.
| Product Name | Item Number |
| ULTIMAT FUTURA MAT CUTTERS | |
| Keencut Ultimat Futura 40" Mat Cutter | UF100 |
| Keencut Ultimat Futura 48" Mat Cutter | UF120 |
| Keencut Ultimat Futura 60.5" Mat Cutter | UF150 |
| EVOLUTION3 SMARTFOLD CUTTERS | |
| Keencut Evolution3 44" SmartFold Cutter | E3SF110 |
| Keencut Evolution3 64" SmartFold Cutter | E3SF160 |
| Keencut Evolution3 84" SmartFold Cutter | E3SF210 |
| Keencut Evolution3 104" SmartFold Cutter | E3SF260 |
| Keencut Evolution3 124" SmartFold Cutter | E3SF310 |
| Keencut Evolution3 142" SmartFold Cutter | E3SF360 |
| Keencut Evolution3 160" SmartFold Cutter | E3SF410 |
| Keencut Evolution3 180" SmartFold Cutter | E3SF460 |
| Keencut Evolution3 200" SmartFold Cutter | E3SF510 |
| EVOLUTION3 BENCHTOP CUTTERS | |
| Keencut Evolution3 44" BenchTop Cutter | E3BT110 |
| Keencut Evolution3 64" BenchTop Cutter | E3BT160 |
| Keencut Evolution3 84" BenchTop Cutter | E3BT210 |
| Keencut Evolution3 104" BenchTop Cutter | E3BT260 |
| Keencut Evolution3 124" BenchTop Cutter | E3BT310 |
| Keencut Evolution3 142" BenchTop Cutter | E3BT360 |
| Keencut Evolution3 160" BenchTop Cutter | E3BT410 |
| Keencut Evolution3 180" BenchTop Cutter | E3BT460 |
| Keencut Evolution3 200" BenchTop Cutter | E3BT510 |
| EVOLUTION3 FREEHAND CUTTER BARS | |
| Keencut Evolution3 44" FreeHand Cutter Bar | E3FH110 |
| Keencut Evolution3 64" FreeHand Cutter Bar | E3FH160 |
| Keencut Evolution3 84" FreeHand Cutter Bar | E3FH210 |
| Keencut Evolution3 104" FreeHand Cutter Bar | E3FH260 |
| Keencut Evolution3 124" FreeHand Cutter Bar | E3FH310 |
| UTILITY BLADES | Box of |
Part Number |
Artist*/ Artist Plus* |
Evolution* | Evolution E2 |
Excalibur 5000 & 1000x |
Flexo*/Flexo Futura Cutter |
Javelin Series 2 |
|
|---|---|---|---|---|---|---|---|---|---|
 |
MEDIUM DUTY - CA50/019 This blade is used for cutting standard material up to 3/8” (0.375) thick. | 100 | CA50-019 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
 |
SUPERIOR QUALITY - CA50/010 Made out of surgical grade steel, this blade has a superior edge for performance cutting. (0.375) thick. | 100 | CA50-010 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
 |
GRAPHIK D.017 - CA50/032 Designed to cut a variety of boards up to 1/2" thick, the reversible blades make it ideal for left-handed and right-handed operators. | 100 | CA50-032 | ✔ | ✔ | ||||
 |
ACRYLIC SCORING KX33 The scoring blade is designed to score acrylics and Plexiglas; then snap along the scoring line. | 5 | SCO | ✔ | |||||
 |
TECH D .012 This blade creates a double-ground knife-edge cut 0.012” thick. | 100 | CA50-017 | ✔ | ✔ | ||||
 |
TECH D .015 This blade creates a double-ground knife-edge cut 0.015" thick. | 100 | CA50-020 | ✔ | ✔ | ||||
 |
TECH S .012 This blade creates a single-ground chisel edge cut 0.012” thick. | 100 | CA50-021 | ✔ | ✔ | ||||
 |
TECH S .015 This blade creates a single-ground chisel-edge cut 0.015” thick. | 100 | CA50-030 | ✔ | ✔ | ||||
 |
28MM TEXTILE WHEELS The 28mm circular blade is used for cutting textiles, thin paper, fabric and other flimsy materials. | 10 | TEXB | ✔ | |||||
 |
45MM TEXTILE WHEELS The 45mm OLFA circular blade is used for cutting textiles, thin paper, fabric and other flimsy materials. | 10 | CIR45 | ✔ | ✔ |
Receive a 10% off coupon for just signing up.
Copyright © 2026 MyBinding
